AQUA Water Quality Measuring Equipment Total Cyanide Automatic Measuring Device TCN-580
Anatec Yanaco Co., Ltd.
About This Product
Cyan is measured using the distillation procedure and pyridine pyrazolone spectrophotometry specified in JIS K0102, but this measurement method requires skill and takes several hours, so it cannot be easily and reliably measured. A method was desired. The TCN-580 can measure total cyanide in a sample within 30 minutes, and can measure concentrations starting from 0.01 mg/L, making it useful not only for automatic monitoring of total cyanide but also for labor-saving measurements that replace manual analysis. You can use it.
■Features
- Total cyanide measurement is possible from 0.01 mg/L with a minimum measurement cycle of 30 minutes.
・Highly selective measurements can be achieved even in the presence of interfering substances.
・Automatic calibration is possible using cyan standard solution.
・Recovery curve can be checked in real time
・Self-diagnosis function reduces maintenance work
■Repeatability (with standard solution)
±3% of full scale (as an equal division of logarithmic output)
At 1mg/L, within approximately -0.15, 0.17mg/L
At 0.1mg/L, within approximately -0.015, 0.017mg/L
(For diluted measurements, ±4% or more of full scale)
■External input/output
1) Measured value voltage output DC0.000~1.000V within ±0.005V (non-insulated)
2) Measured value current output DC4.00~20.00mA±0.08mA (isolated)
3) Alarm contact output No-voltage a contact output (contact capacity 1A or less at 100V AC / 30V DC)
(Optional to change to B contact)
・Concentration upper limit alarm
・Sample cutting option
・Cleaning water cutoff
・Instrument abnormality
・Power cut off
・Under maintenance
4) External start input No-voltage A contact input (1 second or more)
■Installation conditions
・Indoor installation (installed in a building as close as possible to the water sampling point, avoiding direct sunlight)
・Temperature: 2~35℃ (30℃ or less, temperature control with air conditioner recommended)
・Humidity: 85%RH or less
・Vibration: General factory level
・Atmosphere: A place free of corrosive gases (H2S/SO2/NH3/CL2, etc.)
-
Product
AQUA Water Quality Measuring Equipment Total Cyanide Automatic Measuring Device TCN-580
-
Handling Company
Anatec Yanaco Co., Ltd.
-
Categories
1 Models of AQUA Water Quality Measuring Equipment Total Cyanide Automatic Measuring Device TCN-580
| Product Image | Part Number | Price (excluding tax) | Control method | Dilution/washing water conditions | Display | Distillation method | External dimensions | Ground | Heating tank | Installation space | Mass | Measurement method | Measurement period | Measurement target | Measuring range | Measuring tank | Number of samples | Power consumption | Power supply | Printed content | Printing method | Proofreading | Reagent replenishment | Reagents used | Sample conditions | Sample/reagent measurement | Saved data |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
TCN-580 |
Available upon quote | Computer control |
Tap water or purified water (for dilution measurements, use ion exchange water or pure water) Water temperature: 2~35℃ Pressure: 0.1~0.2MPa Usage amount: Approximately 6L/measurement (Standard setting: Cooling water flow rate 150mL/min condition) |
5.7 inch touch panel LCD display Display: time, measurement status, daily report, settings, cyan recovery curve history, alarm history, etc. |
Hydrogen cyanide gas recovery method using negative pressure ventilation distillation under heating conditions | (W) 800 × (D) 600 × (H) 1,600mm (channel base type) | Class D grounding (separate from power grounding) | Made of quartz glass (by heater heating: with dry heating prevention sensor) | 1m required for maintenance space at the front and approximately 0.6m at the rear | Approximately 155kg | Negative pressure aeration distillation - cyanide ion electrode measurement method |
Shortest measurement cycle: approximately 30 minutes Repeat measurements, arbitrary measurements, and measurement starts using external contact signals are also possible. |
Cyanide in free and complex cyanide compounds in water |
0~1 to 5mg/L or less (effective measurement range: 0.01mg/L~) Other ranges can also be manufactured. |
Made of Pyrex amber glass (temperature-compensated concentration type using sensor) | 1 sample (2 or more samples available as an option) | Approximately 700VA (at maximum load) | AC100V±10% 50/60Hz (built-in earth leakage breaker) |
Setting value, measured value, measured value bar graph, cyan recovery curve, calibration value, daily report, power off, Printing of individual marks for various abnormalities (forward/reverse order printing selectable) |
Graphic printer thermal paper (paper width 60mm) (equipped with automatic recording paper winding mechanism as standard) |
After measuring the standard solution in the CAL process, enter the printed value for calibration using the keypad. Schedule setting is possible with the optional automatic calibration mechanism. |
Continuous measurement is possible for 14 days without reagent replenishment with a measurement cycle of 1 hour. |
Cuprous chloride/hydrochloric acid solution phosphoric acid solution sodium hydroxide solution |
Water temperature: 2~40℃ Pressure: 0.02~0.05MPa Flow rate: 1~5L/min |
Negative pressure suction metering method (including metered discharge method) |
Measurement data: Approximately 6 months Recovery curve history data: about 1 month Alarm history data: Latest 10 items |
Customers who viewed this product also viewed
Other products of Anatec Yanaco Co., Ltd.
View more products of Anatec Yanaco Co., Ltd.
About Company Handling This Product
- Japan