All Categories

History

AQUA water quality measuring device TOC automatic measuring device TOC-380D-TOC-380D
AQUA water quality measuring device TOC automatic measuring device TOC-380D-Anatec Yanaco Co., Ltd.

AQUA water quality measuring device TOC automatic measuring device TOC-380D
Anatec Yanaco Co., Ltd.


About This Product

There are various indicators set by the government for pollutants in wastewater discharged from factories, business offices, etc., and organic pollutants are considered to be an important monitoring item. In order to manage wastewater, not only constant monitoring at the final outlet (downstream) is required, but also rapid measurement upstream of the wastewater treatment process is required from the perspective of avoiding the risk of spillage. TOC-380D is a device that uses combustion oxidation and infrared analysis, and is capable of measuring a wide range of concentrations from low to high concentrations in a minimum cycle of about 6 minutes, and also has a correlation with the COD value measured by the specified measurement method. It is suitable for measuring a variety of samples, from constant monitoring to process water management. In addition, a variety of options are available to meet a wide range of user needs, and when combined with proprietary technology, highly accurate long-term continuous measurement is achieved.

■Features

・Measurements compliant with specified measurement methods are possible by heating at 120℃ for 30 minutes. ・Equipped with a uniquely developed autoclave tank that has excellent heat resistance, pressure resistance, and chemical resistance. ・Equipped with a unique search system that enables long-term stable measurements - Adopts negative pressure suction method for sample water collection

■External input/output

1 ) Measured value voltage output DC0.000~1.000V within ±0.005V (non-insulated) 2 ) Measured value current output DC4.00~20.00mA±0.08mA (isolated) 3 ) Alarm contact output No-voltage a contact output (contact capacity 1A or less at 100V AC / 30V DC) (Changing to b contact…optional) 1.Concentration upper limit alarm 2. Sample cutting…Option 3Washing water cutoff 4. Instrument abnormality 5.Detector abnormality 6. Power off 7. Under maintenance 4 ) External start input No-voltage a contact input (1 second or more)

■Dilution/washing water conditions

・Tap water or purified water (for dilution measurements, use ion exchange water or pure water) ・Water temperature: 2~35℃ ・Pressure: 0.1~0.2MPa ・Usage amount: Approximately 500mL/measurement (when set to perform cleaning after each measurement) *If the total carbon concentration in tap water is over 2mg/L, please use ion exchange water.

■Installation conditions

・Indoor installation (installed in a building as close as possible to the water sampling point, avoiding direct sunlight) ・Temperature: 2~35℃ (30℃ or less, temperature control with air conditioner recommended) ・Humidity: 85%RH or less ・Vibration: General factory level ・Atmosphere: A place where there is no risk of corrosive gases (H2S/SO2/NH3/CL2, etc.) or sea breeze coming in directly, and where there is little dust.

  • Product

    AQUA water quality measuring device TOC automatic measuring device TOC-380D

Share this product


60+ people viewing

Last viewed: 5 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of AQUA water quality measuring device TOC automatic measuring device TOC-380D

Image Part Number Price (excluding tax) Power supply Piping diameter Mass Sample combustion furnace Sample conditions Sample/reagent measurement Installation space Repeatability Air source conditions Measuring range Measurement method Measurement target Measurement period Power consumption Washing Water removal Detector Number of samples Proofreading Ground External dimensions Printing method Printed content Control method Saved data Display Zero correction Carrier gas
AQUA water quality measuring device TOC automatic measuring device TOC-380D-Part Number-TOC-380D

TOC-380D

Available upon quote

AC100V±10% 50/60Hz (built-in earth leakage breaker)

Tap water inlet: Rp1/2 (valve socket nominal diameter 13)
Drain outlet: Rp1 (valve socket nominal diameter 25)
Sample inlet: Rc1/8 (attached union)

Approximately 170kg


Variable from 680 to 900℃ depending on the properties of the sample

Made of transparent quartz glass (filled with platinum catalyst)

Water temperature: 2~40℃
Pressure: 0.02~0.05MPa
Flow rate: 1~5L/min

Negative pressure suction metering method (including metered discharge method)

1m required for maintenance space at the front and approximately 0.6m at the rear

±2% of full scale (with standard solution)
(±3% of full scale when measuring 0 to 20 mg/L or less and adding a dilution measurement mechanism)

Pressure: 0.4MPa~0.9MPa (Do not contain oil or water droplets)
Usage amount: Approximately 5L/min

0~20 to 1,000mg/L *Others can be manufactured (with dilution measuring mechanism)

Combustion oxidation/non-dispersive infrared analysis method

Total organic carbon (TOC) or total carbon (TC) in water

Shortest measurement cycle: Approx. 6 minutes (excluding cleaning time)
Repeat measurements, arbitrary measurements, and measurement starts using external contact signals are also possible.

Approximately 1KVA (at maximum load) *Excluding use of service outlet

Method of cleaning the inside of the flow path, drip pipe, catalyst, etc. using cleaning water

Electronic cooling dehumidifier

Non-dispersive infrared analyzer

1 sample (2 or more samples available as an option)

Measure the standard solution in the CAL process and key in the printed value for calibration.

Class D grounding (separate from power grounding)

(W) 700 × (D) 600 × (H) 1,600mm (channel base type)

Thermal printer thermal paper (paper width 60mm) (automatic winding mechanism standard equipment)

Setting values, measured values, measured value bar graphs, setting conditions, calibration values, daily reports, power off,
Various alarms/individual mark printing of abnormal locations, etc. (forward/reverse order printing selectable)

Computer control

Measurement data: Approximately 6 months
End point history data: about 1 month
Alarm history data: Latest 10 items

5.7 inch touch panel LCD display
Display: time, measurement status, daily report, settings, light intensity history, alarm history, etc.

Automatic zero point method for each measurement

Instrument air (purified in equipment)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Water Testers Products

Other products of Anatec Yanaco Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Anatec Yanaco Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree