Computer-controlled twin capillary rheometer R6000
ITS Japan Co., Ltd.
About This Product
■Shear viscosity × extensional viscosity.
Achieves corrected and accurate shear viscosity measurements with high reproducibility. Furthermore, the tensile viscosity can be easily measured to determine the true nature of the material. Imatec's R6000 provides a new benchmark for material design, with flexible control software and a robust frame that eliminates measurement errors, highlighting the precise information needed for molding.
■Features
- Computer-controlled twin capillary rheometer with two measuring tubes.
・No periodic calibration work by the operator is required. Automatic calibration with platinum sensor (high accuracy 0.01%, temperature stability 0.0003%/℃, temporal fluctuation rate 0.001%/year).
・The barrel is divided into 3 zones, and each zone can control the temperature independently. The temperature uniformity throughout the barrel is also outstanding. The temperature control sensor is a newly developed knuckle heater located very close to the center of the barrel. Precise control of sample temperature.
- The variable range of piston speed is from 0.01mm/min to 500mm/min (maximum speed 1.000mm/min as an option). Using a 0.25mm die, the shear rate is up to 9.6×10 5/s.
・An ultra-precision pressure sensor is used to measure resin pressure, and measurement stability is excellent. The software has a pressure equilibrium point detection function that captures highly accurate pressure data in the minimum amount of time necessary.
- Insert a pressure sensor into the die entrance and directly measure resin pressure. The load applied to the piston is measured using a separate load cell.
・A forced exhaust system may be installed in case toxic gas is generated during measurement.
・Interlock system against piston load and resin pressure overload.
- In case of emergency, the front of the device is equipped with a door with a safety device to ensure the safety of the operator.
■RheoSolve software specifications Platform
Windows XP Pro SP2 or later
■RheoSolve software specifications Pressure sensor database
A database that registers pressure sensor information. Calibration information for each sensor is also saved. Select the sensor used for measurement from the database.
■RheoSolve software specifications Die database
A database that registers measurement die information. Select the die to be used for measurement from the database.
-
Product
Computer-controlled twin capillary rheometer R6000
-
Handling Company
ITS Japan Co., Ltd.
-
Categories
1 Models of Computer-controlled twin capillary rheometer R6000
| Product Image | Part Number | Price (excluding tax) | Capillary die lineup | Capillary die precision | Measurement Force measurement | Measurement Measurement accuracy | Measurement piston control range | Measurement pressure sensor | Measurement selection range | Measurement sensor connection channel | Measurement temperature sensor | Mechanism External dimensions/weight | Mechanism Required power supply | Mechanism frame strength | Mechanism measuring barrel | Mechanism safety mechanism | Mechanism structure | RheoSolve Software Specification Recommended System | RheoSolve Software Specifications Control Functions | RheoSolve software specifications Display/output functions | Temperature control Temperature control range | Temperature control Temperature measurement accuracy | Temperature control material | Temperature control temperature sensor |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
R6000 |
Available upon quote |
Length: 0.25mm~40mm Diameter: 0.25mm~5mm Incident angle: 60°~180° |
Diameter: within ±5μm Length: Within ±10μm |
Transducer in crosshead (standard 50kN) | ±0.25% of measurement range |
0.01mm/min~500mm/min Drive motor encoder 10,000 (resolution: 0.02μm) Error less than 50μm for piston full travel. |
Direct detection of pressure loss within each bore. | 3.5・5・7・10・20・35・50・70・100・140・200Mpa | 5 channels, 4-20mA 16bit data conversion | Platinum sensor (according to DIN43760) |
730mm (width) x 800mm (depth) x 2,400mm (height) Weight: 400kg |
Single phase 220VAC 50/60Hz 16A | 290kN |
Twin bore type ◎Each φ15mm standard (optional φ12mm, φ20mm) Bore length: 280mm (with option to tilt the barrel forward by 28° for cleaning) |
Protective screen door (interlocking) Crosshead force transducer, motor overcurrent, emergency stop switch, exhaust mechanism compatible, machine safety standards 89/392/EEC and 91/368/EEC certified |
Sturdy H frame structure with two φ65mm bars. |
Pentium3 1GHz or higher 512MB memory 40GB hard disk 10Base T network port for connection to rheometer. |
Crosshead control, temperature control (3 zone division), measurement condition setting (temperature equilibrium and pressure value) | Graph display of shear viscosity, extensional viscosity, etc., real-time graph display of sensor detection values, list display of measurement conditions, list display of numerical data, data output in Microsoft Excel, CSV, ASCII format. | Room temperature +10℃~400℃ | Less than ±0.5℃. | 3-zone temperature measurement and control. | Platinum sensor (according to DIN43760) |
Customers who viewed this product also viewed
Other products of ITS Japan Co., Ltd.
High load type Iprexor series 2000N
ITS Japan Co., Ltd.
10+ people viewing
Last viewed: 14 hours ago
View more products of ITS Japan Co., Ltd.
About Company Handling This Product
- Japan