All Categories
History
Response Rate
100.0%
Response Time
47.2hours
Product
DC-J series DC135J-T2Handling Company
Shibaura MachineCategories
| Image | Part Number | Price (excluding tax) | Mold thickness | Number of moving cores | Number of moving core ports | Maximum injection force | Extrusion force | Extrusion stroke | Required cooling water (for mold) | Required cooling water (for oil cooler) | Required amount of hydraulic oil | Injection speed | Injection port position | Pressure boost ratio | Mold clamping force | Hydraulic oil tank capacity | Working pressure | Plunger stroke | Chip protrusion amount | Tip diameter | Chip cooling adjustment valve | Die cooling adjustment valve | Die cooling water outlet connection pipe diameter | Die cooling water inlet connection pipe diameter | Die plate dimensions (V×H) | Die stroke | Tie bar spacing (V×H) | Tie bar diameter | Sleeve length | Oil cooler cooling outlet pipe diameter | Oil cooler cooling inlet pipe diameter |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
DC135J-T2 |
Available upon quote |
500~250mm |
3/8"×1 piece (unit) |
1/2"×2 sets (sets) |
193kN |
76.6kN |
15~75mm |
70~120/min |
35ℓ/min |
250ℓ |
0.05~6.0m/s |
-100mm |
1:2.25 |
1,350kN |
200ℓ |
15MPa |
305mm |
165 (or 120) mm |
45~60mm |
1/4"×1 piece (unit) |
1/4"×10 pieces (unit) |
2"Rc |
1"Rc |
680x680mm |
350mm |
460x460mm |
85mm |
167mm |
1"Rc |
1"Rc |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
