Medical AC DC Open Frame Quad Output FPM110
FranMar International Inc.
About This Product
The FPM110 series compact open PCB construction AC-DC switching power supplies are specifically designed for medical applications. It can deliver 72 to 110 watts of continuous power with 25 CFM forced air cooling or 60 to 80 watts with convection cooling. Operates with input voltages from 85 to 264 VAC without the need for a selector strap.
All models meet UL, CSA medical device safety requirements. FPM110-zyyy x = S, D, T or Q to represent multiple outputs. S indicates single output, D indicates dual output, T indicates triple output, Q indicates quad output, and yyy indicates different output ratings.
■Features
・Low safety ground leakage current
・Compliant with EN55011 class B
・Small and lightweight
・100% burn-in
・Wide input range 85-264VAC
・Input surge current protection
・Overvoltage protection
・Overcurrent protection
・Compliant with RoHS requirements
-
Product
Medical AC DC Open Frame Quad Output FPM110
-
Handling Company
FranMar International Inc.
-
Categories
1 Models of Medical AC DC Open Frame Quad Output FPM110
| Product Image | Part Number | Price (excluding tax) | Cooling | Derating | EN55011 | EN61000-3-2 | EN61000-3-3 | EN61000-4-2 | EN61000-4-3 | Efficiency | Hold up time | Input current | Input frequency | Input voltage | Inrush current | Leakage current | Line regulation | MTBF | Maximum output power | Operating temperature | Output voltage/current | Overcurrent protection | Overvoltage protection | PFD | Relative humidity | Ripple and noise | Storage temperature | Switching frequency | Temperature coefficient | Touch current | Transient response | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FPM110-S033 |
Available upon quote | 72-110 watts continuous output with 25CFM forced air cooling or 60-80 watts with convection cooling | Linear derating from 100% at +50°C to 50% at +70°C | Class B was conducted and Class B was radiated | Harmonic distortion, class A | Flickering lines | ESD, ±15KV air and ±8KV contacts | Radiation resistant, 10V/m | Min. 70% for single output models with Vo≧12V, min. 65% for other models | 12ms minimum at 110VAC | 3.20A (rms) at 115VAC; 1.80A (rms) at 230VAC | 47~63Hz | 85~264VAC | 15A@115VAC or 30A@230VAC, cold start at 25℃ | Up to 220μA@264VAC, 63Hz | Maximum ±0.5% at full load |
Calculated according to MIL-HDBK-217F, 400,000 hours at full load at 25°C ambient temperature EMC performance (EN60601-1-2) |
See rating chart. | -10℃~+70℃ | See rating chart. | All outputs protected against short circuit conditions | Provided only on output #1. Set to 112~132% of nominal output voltage | TTL logic is high for normal operation and low when input power is lost. This signal will appear for at least 1 ms before the V1 output drops 5% below its nominal value. | 5% to 95% non-condensing | 1% peak-to-peak maximum | -40℃~+85℃ | 20~250KHz, depends on load and line | Total output ±0.04%/℃ maximum | Up to 110μA@264VAC, 63Hz | Excursion up to 4% or more for all models, recovery to 1% of final value within 500us after 25% step load change | 5,600VDC from input to output (2MOPP); 2,100VDC from input to ground (1MOPP); 700VDC from output to ground |
Customers who viewed this product also viewed
Other products of FranMar International Inc.
View more products of FranMar International Inc.
About Company Handling This Product
- Taiwan