All Categories

History

High performance mirror cooled dew point meter S8000 Integrale-S8000 Integrale
High performance mirror cooled dew point meter S8000 Integrale-PST Japan Co., Ltd.

High performance mirror cooled dew point meter S8000 Integrale
PST Japan Co., Ltd.

PST Japan Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

22.3hours

Relatively Fast Response


About This Product

Cooled mirror dew point meter S8000 Integral is a standard type cooled mirror dew point meter that pursues high-speed response down to -60℃dp. Equipped with FAST function, guarantees frost formation below 0℃. The operation language is Japanese. Directly measures dew point, temperature, and pressure, providing drift-free long-term humidity measurements over the entire operating range. The S8000 uses this measured value to calculate values ​​such as ppm V, absolute humidity, relative humidity, and ppm W. Michel Cooled Mirror Dew Point Meters directly measure condensation (frost) formation on mirror surfaces, providing long-term, drift-free readings of dew point and relative humidity. Fully automated control with a unique auxiliary cooling system requires no operator intervention even when the dew point changes rapidly from one end of the range. After completing the initial settings and installation work, simply turn on the power switch and measurements will proceed smoothly without any further action.

■Features

・Accuracy: ±0.1℃dp ・Accurate and drift-free measurements ・Easy setup and operation with touch screen interface ・Precise measurement up to dew point -60℃dp ・FAST function guarantees frost formation below 0℃dp

■Application

・Verification of transformer vacuum dryer ・Environmental monitoring in clean/dry rooms ・Metallurgical process monitoring ・Reference equipment for commercially available laboratory calibrators ・Research and development of compressed air dryers

  • Product

    High performance mirror cooled dew point meter S8000 Integrale

Share this product


50+ people viewing

Last viewed: 8 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of High performance mirror cooled dew point meter S8000 Integrale

Image Part Number Price (excluding tax) Dew point sensor specifications accuracy Dew point sensor specifications Measuring range Dew point sensor specifications Measurement principle Dew point sensor specifications Detection system Dew point sensor specifications Operating pressure Dew point sensor specifications Repeatability Dew point sensor specifications Sample flow rate Weight Display power supply Display resolution Display Environmental conditions Display unit of measurement Display power consumption Display output alarm Display output digital Display output analog Display data logging Display HMI Display section EMC compliant Flow sensor measurement accuracy Flow sensor measurement range Size Internal pressure sensor (optional) measurement accuracy Internal pressure sensor (optional) measurement range Internal pressure sensor (optional) Measurement unit General calibration General storage temperature General process connections Remote PRT probe (optional) measurement accuracy Remote PRT probe (optional) temperature measurement
High performance mirror cooled dew point meter S8000 Integrale-Part Number-S8000 Integrale

S8000 Integrale

Available upon quote

±0.1℃dp

-60~+40℃dp

Mirror cooling type

RSS Triple Detection

Low pressure: 0~0.1MPa
High pressure: 0.1~1.7MPa

±0.05℃dp

0.1~1Nl/min

11.4kg

85-264VAC, 47/63Hz

0.0001℃dp (can be user certified depending on parameters)

-20~40℃

Dew point: ℃dp, %RH, g/m3, g/kg, ppmv, ppmw
Temperature:℃
Pressure: barg, psig, kPa, Mpa

100VA

2ch/ Voltage adjustable C contact
Fault alarm x 1, process alarm x 1; 1A@30V DC

USB, ModBusRTU (RS232,485), ModBusTCP, Ethernet

3ch (4-20mA, 0-20mA, 0-1V or more optional equipment)

USB interface
SD card (FAT32) support・32GB (maximum)
*Logging possible for up to 560 days (when logging at 2 second intervals)

5.7” LCD touch screen (blue)

EN61236:1997 (+A1/A2/A3)

±5% Typical

0~1,000ml/min

H487×w440×d343mm

0.25%FS

0~25bara

Psia, bara, kPa, MPa

Standard: 3-point calibration/NPL traceable
UKAS accredited calibration

-20~+50℃

6mm SWG (male) or 1/4SWG (male)

±0.1℃dp

4-wire Pt100, 1/10DIN class B

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Dew Point Hygrometers Products

Other products of PST Japan Co., Ltd.

Reviews shown here are reviews of companies.


View more products of PST Japan Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

22.3hrs


Company Review

5.0
  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree