Motor compressor two-position control specification/regulator specification SAS series SAS55SD
Fuji Electrode Industry Co., Ltd.
About This Product
The intake air volume is controlled in two stages: open (load) and close (unload). The intake air volume is controlled steplessly from 0 to 100%.
■Increased air volume
Equipped with a high-efficiency AS rotor and greatly improved basic performance, it has achieved one of the largest air volumes in its class.
■Energy saving effect
By adopting a high-efficiency AS rotor, we have achieved energy savings compared to conventional machines.
■A.C.C.S. (Pressure width automatic adjustment control)
Automatically changes the purge or starting pressure PH according to the amount of air consumed to save power. The purge start pressure is automatically changed to optimize the cycle T to save power. (For example, if the PH/PL pressure range is 0.1MPa, the power can be saved by approximately 3% by reducing the pressure by up to 0.06MPa.)
■Purge control + automatic start/stop
When the amount of air consumption decreases, the compressed air in the separator tank is released (purged) to lower the pressure, thereby saving power. If the amount of air consumption further decreases, purge operation will automatically stop after a certain period of time.
■Supports standard ambient temperature of 45/50℃
Thanks to improvements in the cooler, fan cooling system, and dryer performance, SAS/SMS4 to 11 models can operate at ambient temperatures of up to 45°C, and SAS/SMS15 to 75 models can operate at ambient temperatures of up to 50°C.
■ Dryer advance operation
Supply clean air from the time the compressor starts. At startup, the dryer operates first and performs cooling operation. The compressor starts when the dryer is sufficiently cooled, so dehumidified air can be supplied.
■Unique drain removal operation
By estimating the dew point from the outside temperature and operating until the discharge air temperature exceeds the dew point, the system performs a reliable drain removal operation in a shorter time than previous models, eliminating the need for troublesome drain removal work.
■Three-stage detection of discharge air temperature
In the unlikely event that the discharge air temperature rises abnormally, the temperature will be detected in three stages. When the second alarm occurs, the purge start pressure is lowered and operation continues as long as possible.
■Dryer drain discharge device
The dryer's drain discharge interval is controlled using a solenoid valve according to the outside temperature and load operation time, ensuring efficient draining. Minimize wasteful air discharge.
■Easy operation
Starting and stopping can be done with one touch using the switch on the panel.
-
Product
Motor compressor two-position control specification/regulator specification SAS series SAS55SD
-
Handling Company
Fuji Electrode Industry Co., Ltd.
-
Categories
1 Models of Motor compressor two-position control specification/regulator specification SAS series SAS55SD
| Product Image | Part Number | Price (excluding tax) | Air volume (m3/min) | Approximate weight (kg) | Pressure (MPa) | Type | Width x depth x height (mm) |
|---|---|---|---|---|---|---|---|
|
|
SAS55SD |
Available upon quote | 10.2 | 1,555 | 0.7 | Air cooling | 2,450×1,150×1,570 |
Customers who viewed this product also viewed
Other products of Fuji Electrode Industry Co., Ltd.
![Oil-fed screw compressor [7.5kW Class] HISCREW NEXTⅢ series VPLUS (variable speed controller)-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006501202410064.png)
![Oil-fed screw compressor [55/75kW Class] HISCREW NEXTⅢ series VPLUS (variable speed controller)-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006501202410066.png)
![Oil-fed screw compressor [100kW Class] HISCREW NEXTⅢ series VPLUS (variable speed controller)-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006501202410067.png)
![Oil-fed screw compressor [150kW Class] HISCREW NEXTⅢ series-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006501202410068.png)
![Oil-fed screw compressor [22-75kW Class] Outdoor type HISCREW NEXTⅢ series-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/3006501202410069.png)
![Oil-fed screw compressor [7.5kW Class] HISCREW NEXTⅢ series Mtype (fixed speed controller)-Fuji Electrode Industry Co., Ltd.](https://metoree.s3.ap-northeast-1.amazonaws.com/img/products-new/30065012024100610.png)
View more products of Fuji Electrode Industry Co., Ltd.