Mist Diamond/IT Series IT Bind Method Dry IT Carbide Drill/Dry IT Diamond Straight Body/Dry IT Drill Cutter
Miyanaga Co., Ltd.
About This Product
■Drilling is possible just by rotating
- Can drill holes in concrete, porcelain tiles, and stone just by rotating.
・Does not collect dust in cracks.
- Minimizes peeling of the back side during penetration.
■Low vibration/low noise
Since the holes are drilled with a rotary drill, the noise is low, so construction can be done without worrying about time or place.
■ Drilling efficiency and durability are greatly improved.
Easily drills through hard porcelain tiles and stone materials that cause burnt edges and chipping when drilling with regular concrete drills and porcelain tile drills.
■Fine adjustment of water volume is possible
Fine adjustment of water volume is possible by using the water volume adjustment valve attached to the shank.
■Reduction of water on site (auto lock mechanism)
・The auto-lock mechanism supplies water to the cutting edge only when drilling, reducing the chance of water getting wet on site.
・Dust collecting pad specification further reduces moisture
■Easy replacement with one touch
The body and shank can be easily replaced with one touch.
■Very economical by replacing only the cutter part
If you use the same diameter, you can purchase it for the price of 2 or 3 regular concrete drills or porcelain tile drills because you only need to replace the cutter part. *Please use radio pliers to replace the cutter.
■Features
- By using a shank with a built-in pulse generation mechanism, you can drill holes efficiently.
・Dry cutting allows construction work without worrying about water post-treatment or stains.
・Low vibration and noise allow construction work to be carried out without worrying about time or place.
-Efficient drilling is possible by using IT carbide drills and IT diamond straight bodies depending on the size used.
- The cutter part and body part of the IT diamond straight body are connected with a screw, and when the cutting edge wears out, only the cutter part can be replaced, making it very economical.
- Minimizes peeling of the back side during penetration.
■Applications
- For drilling holes in concrete, mortar, ceramic siding, and roof tiles (using IT Diamond).
・For seismic reinforcement work, waterproofing work, outer wall reinforcement work, etc.
- For hospitals, schools, other sites where noise cannot be produced, and night work.
-
Product
Mist Diamond/IT Series IT Bind Method Dry IT Carbide Drill/Dry IT Diamond Straight Body/Dry IT Drill Cutter
-
Handling Company
Miyanaga Co., Ltd.
-
Categories
1 Models of Mist Diamond/IT Series IT Bind Method Dry IT Carbide Drill/Dry IT Diamond Straight Body/Dry IT Drill Cutter
| Product Image | Part Number | Price (excluding tax) | Applicable motor | Compatible motor IT carbide drill | Cutting edge diameter (mm) | Effective length (mm) | Total length (mm) |
|---|---|---|---|---|---|---|---|
|
|
ITT035 |
Available upon quote | Electric drill (for rotation only) | Rotary drill (approximately 1,000 revolutions/minute) | 3.5 | 50 | 120 |
Customers who viewed this product also viewed
Other products of Miyanaga Co., Ltd.
View more products of Miyanaga Co., Ltd.
About Company Handling This Product
- Japan