All Categories

History

  1. Metoree
  2. Polymeric Materials
  3. Super Engineering Plastics
  4. PPS (polyphenylene sulfide) (Yumoto Electric Co., Ltd.)
PPS (polyphenylene sulfide)-Board material (natural color) thickness 0.2mm width 500mm x length 1,000mm
PPS (polyphenylene sulfide)-Yumoto Electric Co., Ltd.

PPS (polyphenylene sulfide)
Yumoto Electric Co., Ltd.

Yumoto Electric Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

11.6hours

Company Review

5.0

Fast Response

About This Product

■Features

PPS is a super engineering plastic with excellent heat resistance and mechanical strength. Heat resistance, dimensional stability, chemical resistance, mechanical strength, and abrasion resistance are all at a high level. It is mainly processed by cutting and injection molding. The continuous use temperature is approximately 220℃, the melting point is approximately 278℃, and the glass transition point is approximately 88℃. It has excellent chemical resistance and is resistant to most chemicals in environments below 200℃. Although PPS has heat resistance close to that of PEEK, the material price is 1/2 to 1/4 of PEEK. Water absorption is extremely low, with a water absorption rate of 0.02% after 24 hours of immersion at 23℃. Dimensional changes due to water absorption and moisture absorption hardly occur. Furthermore, it has a low coefficient of thermal expansion and is resistant to dimensional changes due to temperature changes. Due to these factors, it is also used as a material with excellent dimensional stability.

■Mechanical strength

Excellent tensile strength (79MPa) and bending strength (128MPa). However, it is weak against impact and may chip or crack.

■Heat resistance

Continuous use temperature is 220℃, demonstrating high performance even in high temperature range.

■Weather resistance

PPS is a highly weather-resistant plastic material that is resistant to deterioration due to UV rays. Therefore, it is also used for parts exposed outdoors.

■Flame retardant

PPS is a flame retardant material. It is hard to burn and produces little smoke when burned.

■Precautions when using and processing PPS

The continuous use temperature is 220℃, but the glass transition point is as low as 97℃, so care must be taken when using it under high loads and high temperatures. Deformation can occur at temperatures lower than 220°C. It is a material that is difficult to handle during processing because it is easily broken and chipped, and is prone to burrs.

■Appearance

・The top and bottom surfaces of the material are shiny. ・Light gray ~ light brown

■Applications

Manufacturing line parts, medical device parts, semiconductor/LCD related parts, etc.

  • Product

    PPS (polyphenylene sulfide)

Share this product


20+ people viewing

Last viewed: 11 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of PPS (polyphenylene sulfide)

Image Part Number Price (excluding tax) Electrical properties Impact resistance Heat resistant temperature Abrasion resistance Specific gravity Dimensional stability Slip properties
PPS (polyphenylene sulfide)-Part Number-Board material (natural color) thickness 0.2mm width 500mm x length 1,000mm

Board material (natural color) thickness 0.2mm width 500mm x length 1,000mm

Available upon quote

Insulation

△

Room temperature~190℃

△

1.35

○

△

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

PI (Polyimide) /Vespel®-Yumoto Electric Co., Ltd.

PI (Polyimide) /Vespel®

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 9 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

General purpose and super engineering plastic materials and products-Sepac Industrial Co., Ltd.

General purpose and super engineering plastic materials and products

Sepac Industrial Co., Ltd.

190+ people viewing

Last viewed: 3 hours ago

Response time: 54.14 hours

Super Engineering Plastics

3 models listed

Resin for equipment related to food and medical products HEP-PF round bars-Hokuriku Engineer Plastic

Resin for equipment related to food and medical products HEP-PF round bars

Hokuriku Engineer Plastic

390+ people viewing

Last viewed: 33 minutes ago

Super Engineering Plastics

2 models listed

PBI (polybenzimidazole)-Yumoto Electric Co., Ltd.

PBI (polybenzimidazole)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 2 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

Ultra -high -performance plastic | PBI (Polybenzoimidazole) 7000 series-PBI Advanced Materials Co., Ltd.

Ultra -high -performance plastic | PBI (Polybenzoimidazole) 7000 series

PBI Advanced Materials Co., Ltd.

440+ people viewing

Last viewed: 13 hours ago

Super Engineering Plastics

7 models listed

PPS resin-Plus Seiko Co., Ltd.

PPS resin

Plus Seiko Co., Ltd.

80+ people viewing

Last viewed: 8 minutes ago

Super Engineering Plastics

2 models listed

PEEK (Polyetheretherketone)-Yumoto Electric Co., Ltd.

PEEK (Polyetheretherketone)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 2 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6000 series-PBI Advanced Materials Co., Ltd.

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6000 series

PBI Advanced Materials Co., Ltd.

260+ people viewing

Last viewed: 33 minutes ago

Super Engineering Plastics
PEI resin (polyetherimide)-Plus Seiko Co., Ltd.

PEI resin (polyetherimide)

Plus Seiko Co., Ltd.

70+ people viewing

Last viewed: 30 minutes ago

Super Engineering Plastics
Heat plastic resin Super Enpura-Yamaden

Heat plastic resin Super Enpura

Yamaden

550+ people viewing

Last viewed: 40 minutes ago

Super Engineering Plastics

24 models listed

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6R00 series-PBI Advanced Materials Co., Ltd.

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6R00 series

PBI Advanced Materials Co., Ltd.

200+ people viewing

Last viewed: 43 minutes ago

Super Engineering Plastics
PEEK resin (polyetheretherketone)-Plus Seiko Co., Ltd.

PEEK resin (polyetheretherketone)

Plus Seiko Co., Ltd.

70+ people viewing

Last viewed: 21 hours ago

Super Engineering Plastics

2 models listed

See More Super Engineering Plastics Products

Other products of Yumoto Electric Co., Ltd.

Reviews shown here are reviews of companies.

PI (Polyimide) /Vespel®-Yumoto Electric Co., Ltd.

PI (Polyimide) /Vespel®

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 9 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PMP (polymethylpentene)-Yumoto Electric Co., Ltd.

PMP (polymethylpentene)

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 2 hours ago

Response time: 11.56 hours

Macromolecules

3 models listed

PBI (polybenzimidazole)-Yumoto Electric Co., Ltd.

PBI (polybenzimidazole)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 2 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PEEK (Polyetheretherketone)-Yumoto Electric Co., Ltd.

PEEK (Polyetheretherketone)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 2 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PTFE (Polytetrafluoroethylene: Fluororesin)-Yumoto Electric Co., Ltd.

PTFE (Polytetrafluoroethylene: Fluororesin)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 22 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PEI (Polyetherimide) / ULTEM™-Yumoto Electric Co., Ltd.

PEI (Polyetherimide) / ULTEM™

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 25 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PAI (Polyamideimide)-Yumoto Electric Co., Ltd.

PAI (Polyamideimide)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 21 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PBT (polybutylene terephthalate)-Yumoto Electric Co., Ltd.

PBT (polybutylene terephthalate)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 22 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PE (polyethylene)-Yumoto Electric Co., Ltd.

PE (polyethylene)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 3 hours ago

Response time: 11.56 hours

Macromolecules

3 models listed

Red fiber-Yumoto Electric Co., Ltd.

Red fiber

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 7 hours ago

Response time: 11.56 hours

Insulating Materials
U-PE/UHMW (Ultra High Molecular Weight Polyethylene) New Light-Yumoto Electric Co., Ltd.

U-PE/UHMW (Ultra High Molecular Weight Polyethylene) New Light

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 3 hours ago

Response time: 11.56 hours

Macromolecules

3 models listed

Machinable ceramics (free-cutting ceramics)-Yumoto Electric Co., Ltd.

Machinable ceramics (free-cutting ceramics)

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Last viewed: 11 hours ago

Response time: 11.56 hours

Fine Ceramics

View more products of Yumoto Electric Co., Ltd.

About Company Handling This Product

Yumoto Electric Co., Ltd.

Response Rate

100.0%

Response Time

11.6hrs

Company Review

5.0
  • Japan

Related search keywords

Super Engineering Plastics
Super Engineering Plastics　Yumoto Electric Co., Ltd.
Yumoto Electric Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree