All Categories

History

  1. Metoree
  2. Polymeric Materials
  3. Super Engineering Plastics
  4. PEEK (Polyetheretherketone) (Yumoto Electric Co., Ltd.)
PEEK (Polyetheretherketone)-Board material (natural color) thickness 1mm width 500mm x length 1,000mm
PEEK (Polyetheretherketone)-Yumoto Electric Co., Ltd.

PEEK (Polyetheretherketone)
Yumoto Electric Co., Ltd.

Yumoto Electric Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

11.6hours

Company Review

5.0

Fast Response

About This Product

■Features

PEEK is a super engineering plastic with the highest level of heat resistance and mechanical strength among thermoplastic resins. Its properties of heat resistance, dimensional stability, chemical resistance, abrasion resistance, and mechanical strength are all at a high level. Continuous use temperature is 240℃~260℃, melting point is 334℃, glass transition point is 143℃. It has extremely high hot water resistance among plastic materials and can be used continuously in steam at 200-250℃. It is resistant to most acids, alkalis, and organic solvents even in high-temperature environments. However, it is attacked by some chemicals such as concentrated sulfuric acid, so it is necessary to check the usage environment and the manufacturer. PEEK is a flame-retardant material that is difficult to burn and emits very little toxic gas when burned. Due to its high mechanical strength, it is one of the most difficult plastic materials to cut. However, compared to metal materials, it is easier to cut, so it is not difficult to process.

■Mechanical strength

It has excellent tensile strength (98MPa) and impact resistance (Izod impact strength 77J/m), and maintains high strength over a wide temperature range. There are also grades with even stronger strength made of glass fiber or carbon fiber.

■Heat resistance

It has particularly excellent heat resistance among super engineering plastics. Continuous use temperature is 240℃ to 260℃, and continuous use is possible in steam at 200 to 250℃. Therefore, it can be treated by steam sterilization.

■Flame retardant

PEEK is a flame retardant material. Very little smoke, corrosive gas or toxic gas is generated during combustion, or toxic gas is generated during vacuum.

■Precautions when using and processing PEEK

As a plastic material, it has few weaknesses, but it is expensive. As an alternative to metal parts, it is the first choice if cost is not taken into account. However, it may be difficult for cost reduction purposes, so it is necessary to confirm that the specifications are not over-specified against the requirements of the parts. Due to its high hardness, care must be taken to avoid chipping during processing.

■Appearance

・The top and bottom surfaces of the material are shiny. ·gray

■Applications

Various production line parts, medical equipment parts, semiconductor/LCD manufacturing equipment parts, inspection equipment parts, manufacturing jigs, nuclear power related parts, electronic parts, various precision equipment parts, food processing machine related parts, chemical plant related parts, welding. Equipment-related parts, plating equipment-related parts, metal surface treatment-related parts

  • Product

    PEEK (Polyetheretherketone)

Share this product


40+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of PEEK (Polyetheretherketone)

Image Part Number Price (excluding tax) Electrical properties Impact resistance Heat resistant temperature Abrasion resistance Specific gravity Dimensional stability Slip properties
PEEK (Polyetheretherketone)-Part Number-Board material (natural color) thickness 1mm width 500mm x length 1,000mm

Board material (natural color) thickness 1mm width 500mm x length 1,000mm

Available upon quote

Insulation

○

-50~260℃

○

1.32

○

○

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

PI (Polyimide) /Vespel®-Yumoto Electric Co., Ltd.

PI (Polyimide) /Vespel®

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 22 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

Resin for equipment related to food and medical products HEP-PF round bars-Hokuriku Engineer Plastic

Resin for equipment related to food and medical products HEP-PF round bars

Hokuriku Engineer Plastic

390+ people viewing

Super Engineering Plastics

2 models listed

PBI (polybenzimidazole)-Yumoto Electric Co., Ltd.

PBI (polybenzimidazole)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 15 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

Ultra -high -performance plastic | PBI (Polybenzoimidazole) 7000 series-PBI Advanced Materials Co., Ltd.

Ultra -high -performance plastic | PBI (Polybenzoimidazole) 7000 series

PBI Advanced Materials Co., Ltd.

470+ people viewing

Last viewed: 28 minutes ago

Super Engineering Plastics

7 models listed

PPS resin-Plus Seiko Co., Ltd.

PPS resin

Plus Seiko Co., Ltd.

100+ people viewing

Last viewed: 55 minutes ago

Super Engineering Plastics

2 models listed

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6000 series-PBI Advanced Materials Co., Ltd.

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6000 series

PBI Advanced Materials Co., Ltd.

270+ people viewing

Last viewed: 20 hours ago

Super Engineering Plastics
PEI resin (polyetherimide)-Plus Seiko Co., Ltd.

PEI resin (polyetherimide)

Plus Seiko Co., Ltd.

80+ people viewing

Last viewed: 32 minutes ago

Super Engineering Plastics
PPS (polyphenylene sulfide)-Yumoto Electric Co., Ltd.

PPS (polyphenylene sulfide)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 3 hours ago

Response time: 11.56 hours

Super Engineering Plastics

4 models listed

Heat plastic resin Super Enpura-Yamaden

Heat plastic resin Super Enpura

Yamaden

550+ people viewing

Last viewed: 11 hours ago

Super Engineering Plastics

24 models listed

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6R00 series-PBI Advanced Materials Co., Ltd.

Excellent heat resistance, electrical insulation, chemical resistance | PI (polyimide) 6R00 series

PBI Advanced Materials Co., Ltd.

210+ people viewing

Super Engineering Plastics
PEEK resin (polyetheretherketone)-Plus Seiko Co., Ltd.

PEEK resin (polyetheretherketone)

Plus Seiko Co., Ltd.

80+ people viewing

Last viewed: 9 hours ago

Super Engineering Plastics

2 models listed

PTFE (Polytetrafluoroethylene: Fluororesin)-Yumoto Electric Co., Ltd.

PTFE (Polytetrafluoroethylene: Fluororesin)

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

See More Super Engineering Plastics Products

Other products of Yumoto Electric Co., Ltd.

Reviews shown here are reviews of companies.

Bending-Yumoto Electric Co., Ltd.

Bending

Yumoto Electric Co., Ltd.

5.0

20+ people viewing

Response time: 11.56 hours

PI (Polyimide) /Vespel®-Yumoto Electric Co., Ltd.

PI (Polyimide) /Vespel®

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 22 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PMP (polymethylpentene)-Yumoto Electric Co., Ltd.

PMP (polymethylpentene)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 19 hours ago

Response time: 11.56 hours

Macromolecules

3 models listed

PBI (polybenzimidazole)-Yumoto Electric Co., Ltd.

PBI (polybenzimidazole)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 15 hours ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PPS (polyphenylene sulfide)-Yumoto Electric Co., Ltd.

PPS (polyphenylene sulfide)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 3 hours ago

Response time: 11.56 hours

Super Engineering Plastics

4 models listed

PTFE (Polytetrafluoroethylene: Fluororesin)-Yumoto Electric Co., Ltd.

PTFE (Polytetrafluoroethylene: Fluororesin)

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PEI (Polyetherimide) / ULTEM™-Yumoto Electric Co., Ltd.

PEI (Polyetherimide) / ULTEM™

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PAI (Polyamideimide)-Yumoto Electric Co., Ltd.

PAI (Polyamideimide)

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PBT (polybutylene terephthalate)-Yumoto Electric Co., Ltd.

PBT (polybutylene terephthalate)

Yumoto Electric Co., Ltd.

5.0

40+ people viewing

Last viewed: 45 minutes ago

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PMMA (acrylic)/polymethyl methacrylate resin-Yumoto Electric Co., Ltd.

PMMA (acrylic)/polymethyl methacrylate resin

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 22 hours ago

Response time: 11.56 hours

Macromolecules

2 models listed

UNILATE/Unilate®-Yumoto Electric Co., Ltd.

UNILATE/Unilate®

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Response time: 11.56 hours

Super Engineering Plastics

3 models listed

PE (polyethylene)-Yumoto Electric Co., Ltd.

PE (polyethylene)

Yumoto Electric Co., Ltd.

5.0

30+ people viewing

Last viewed: 23 minutes ago

Response time: 11.56 hours

Macromolecules

3 models listed


View more products of Yumoto Electric Co., Ltd.

About Company Handling This Product

Yumoto Electric Co., Ltd.

Response Rate

100.0%

Response Time

11.6hrs

Company Review

5.0
  • Japan

Related search keywords

Super Engineering Plastics
Super Engineering Plastics　Yumoto Electric Co., Ltd.
Yumoto Electric Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree