■Features
Stubborn dark stains and limescale that are stuck to the tiles cannot be removed no matter how many times you brush them using a high-pressure washer or commercially available detergent. Tilescut, a detergent specifically designed for removing dark stains from tiles, can thoroughly remove those dark stains and water stains that cannot be removed no matter how many times you brush them using a high-pressure washer or commercially available detergent.
■How to use tile cut
(1) Determine the dilution ratio for use (be sure to perform test construction before use)
・For light dark stains: dilute 5 to 10 times
・For severe dark stains: undiluted solution to 2x dilution
(2) Apply it within reach using a chemical brush, etc.
・For light dark stains: Dark stains and water stains can be removed just by brushing.
・For severe dark stains: Please use brushing or cleaning pads together.
・Never leave it on for a long time.
(3) Rinse thoroughly with water.
Make sure to collect any wastewater generated during work.
■Tile cut usage points
Before use, be sure to perform a test application and check the dilution concentration depending on the condition of the darkening stain.
・You can get a clean finish by washing the areas that you can reach separately, instead of applying all at once.
・Be careful of acid-sensitive materials, objects other than the work area, and the environment around the work.
・Please read the instruction manual carefully before use.
・Please note that depending on the material of the tile, the gloss or color may fade.
■Please be careful
As a general rule, please do not use tile cuts for ``soaking'' as this may cause damage to the tile, such as ``skidding'' or ``color loss''. Please check the site conditions and the tile material, conduct sufficient test construction and have a meeting, and consider how to use it.
This is the version of our website addressed to speakers of English in
the United States.
If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.