All Categories

History

Electric lock controller TS-ACEK01-TS-ACEK01
Electric lock controller TS-ACEK01-Seiwa Disaster Prevention Co., Ltd.

Electric lock controller TS-ACEK01
Seiwa Disaster Prevention Co., Ltd.


About This Product

Electric lock control 3 patterns of control input

■Contact control: 1Shot control/Continuous unlocking control (for voltage-free contacts)

・With 1Shot control, A/B/E mode operation allows temporary locking/unlocking control and operation tailored to the system. ・Continuous unlocking control allows forcibly keeping the lock unlocked. It can be operated according to the system, such as fire alarm, emergency use, and constant unlocking.

■RS-485 communication control (Union Community ViRDI product AC series only)

In addition to locking/unlocking control via RS-485 communication, the status of the electric lock can be sent to ViRDI products.

■JEM-A standard control (HA terminal)

Compatible with the control method called JEM-A standard, which is used in intercoms, etc. Electric locks can be controlled from an intercom that complies with JEM-A standards. *The control operation using the JEM-A control signal is the same as the 1Shot control in item 1.

■A/B/E 3-mode electric lock control method

・A mode: Closed door automatic locking mode The door will be automatically locked when you close it. ・B mode: Repeated locking and unlocking mode: Repeats locking and unlocking for each operation. Even if the door is closed, it will not lock automatically. ・E mode: Combined use of B mode (manual operation) and A mode (main unit operation). When the door is closed, it will automatically lock. If unlocked manually (thumb turn, etc.), it will remain unlocked.

■Compatible electric lock

1. Controls MIWA (7-wire control) and GOAL (6-wire control). Electric locks from other manufacturers can be connected and controlled if they can operate using the same control method as MIWA or GOAL electric locks. It is also possible to control the electric lock using only one side of the lock/unlock function in the operational settings. 2.Monitor only the lock signal or unlock signal among lock/unlock signals Other settings

■Temporary unlock timer

If the door does not open or close after a set number of seconds after being unlocked, it will automatically lock.

■Over-open timer

If the door remains open for more than the set number of seconds, it will be recognized as an abnormality.

■Response to electric lock abnormalities

If there is an abnormality in the lock operation, a signal notifying the abnormality is output without voltage from the abnormality alarm output terminal. The error notification LED on the board lights up in a lighting pattern depending on the error content.

  • Product

    Electric lock controller TS-ACEK01

Share this product


60+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Electric lock controller TS-ACEK01

Image Part Number Price (excluding tax) Power supply Weight Operational mode Continuous unlocking input Management gate Abnormal alarm output Special settings Current consumption Lock output Door over-open output Compatible electric lock Basic functions Control setting input Internal board dimensions Operating temperature Case dimensions RS-485 communication compatible equipment JEM-A input/output 1Shot control input
Electric lock controller TS-ACEK01-Part Number-TS-ACEK01

TS-ACEK01

$ 422.50〜

DC24V (±10%)

230g

A mode/B mode/E mode

No-voltage A contact continuous

1 gate

No-voltage A contact or No-voltage B contact

No lock signal monitoring No unlock signal monitoring

MAX 0.7A

No-voltage A contact or No-voltage B contact

No-voltage A contact or No-voltage B contact

MIWA/GOAL electric lock (other equivalent electric lock)

Electric lock or electric strike control

Select when connecting management software UNIS (see instruction manual)

125 (W) ×70 (D) ×Max18 (H) mm

0℃~+50℃ (No freezing or condensation)

180 (W) × 125 (D) × 35 (H) mm

Union Community Company ViRDI Product AC Series
*Please contact us separately for details.

JEM-A terminal (HA terminal) Compliant with JEM-A standard

No-voltage A contact instantaneous

Other products of Seiwa Disaster Prevention Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Seiwa Disaster Prevention Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree