All Categories

History

  1. Metoree
  2. Electric lock simulated operation tool (GOAL specification) TS-REK04 (Seiwa Disaster Prevention Co., Ltd.)
Electric lock simulated operation tool (GOAL specification) TS-REK04-TS-REK04
Electric lock simulated operation tool (GOAL specification) TS-REK04-Seiwa Disaster Prevention Co., Ltd.

Electric lock simulated operation tool (GOAL specification) TS-REK04
Seiwa Disaster Prevention Co., Ltd.

About This Product

■Product overview

-This product performs a pseudo lock/unlock operation in response to a lock/unlock operation signal input from an electric lock control device, etc., and outputs a pseudo locked status signal and an unlocked status signal output by the electric lock. It also outputs the door close signal manually. - Compatible with electric locking types such as locking when energized, unlocking when energized, and motor locking/unlocking type (instantaneous energizing locking/unlocking type). ・The connection part uses the 6-pin connector and 9-pin connector that GOAL electric locks use, and the signal arrangement is the same as the company's general electric locks, so it can be used with a variety of GOAL electric locks. The connection works by replacing the connector. Main uses

■Used as a substitute for existing electric locks for maintenance of electric lock systems, etc. (Operation check only)

By switching, you can operate the electric locks of the energized unlock type, energized lock type, and motor lock/unlock type (instant energized lock/unlock type) with this machine alone, so there is no need to prepare multiple types of electric locks. . Also, by changing the connection points of this machine, it will be possible to identify the defective point.

■Used for temporary connection when the electric lock must be temporarily removed from an existing electric lock system.

Even in cases where the existing electric lock must be temporarily removed due to changes in the layout of the system in operation, by temporarily connecting this device, the number of abnormality alerts that occur during work can be reduced.

■Used as a substitute for electric locks for checking system operation during system construction.

When constructing an electric lock system, you can check the operation in advance by connecting this product as a substitute for an electric lock. This machine alone can operate several types of electric locks, so even if the type of electric lock changes, there is no need to prepare a new electric lock.

■Notes

・The wiring (connector arrangement) of this product is based on the wiring arrangement manufactured by GOAL. ・This product performs the locking/unlocking operation upon receiving the locking/unlocking operation signal (control energization from the electric lock control device) regardless of whether the door is open or closed, and outputs the locking/unlocking status signal. ・It does not support the lock type automatic discrimination function of electric lock control equipment. Please manually set the type of electric lock connected to the electric lock control device. ・This product does not reproduce the exact same operation or load conditions as an electric lock. It may not work properly depending on the electric lock control device connected. -This product does not have a function to prevent incorrect connections.

  • Product

    Electric lock simulated operation tool (GOAL specification) TS-REK04

Share this product


40+ people viewing

Last viewed: 8 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Electric lock simulated operation tool (GOAL specification) TS-REK04

Image Part Number Price (excluding tax) Weight External dimensions Output (contact) Input Connector shape Case color Case material LED display color Lock/unlock operation signal input Accessories
Electric lock simulated operation tool (GOAL specification) TS-REK04-Part Number-TS-REK04

TS-REK04

$ 97.50〜

38g

45mm x 20mm x 79mm (excluding switch and ring)

Door open/close status signal output (closed door status signal output) x 1 Lock status signal output x 1 Unlock status signal output x 1 Output rated load: DC24V 1A

Lock/unlock operation signal input x 1 Input rating: DC24V (80%~190%) 8.3mA

Molex 1625 series 6 pin and 9 pin

Light gray

ABS

A side positive energization: lights up in blue B side positive energization: lights up in red

TS-REK04 body x 1 Instruction manual x 1

Other products of Seiwa Disaster Prevention Co., Ltd.

Reviews shown here are reviews of companies.

Electric lock simulation tool-Seiwa Disaster Prevention Co., Ltd.

Electric lock simulation tool

Seiwa Disaster Prevention Co., Ltd.

$104.00

30+ people viewing

Last viewed: 19 seconds ago

GOAL electric lock conversion harness TS-REK05-OP1-Seiwa Disaster Prevention Co., Ltd.

GOAL electric lock conversion harness TS-REK05-OP1

Seiwa Disaster Prevention Co., Ltd.

$19.50

60+ people viewing

Last viewed: 12 hours ago

Cable Harnesses
Electric lock pseudo operation tool/GOAL electric lock conversion harness set product TS-REK05-S-Seiwa Disaster Prevention Co., Ltd.

Electric lock pseudo operation tool/GOAL electric lock conversion harness set product TS-REK05-S

Seiwa Disaster Prevention Co., Ltd.

$117.00

60+ people viewing

Last viewed: 12 hours ago

Cable Harnesses
JEM-A conversion adapter TS-JEMA series DC12V to 24V specifications TS-JEMA33-Seiwa Disaster Prevention Co., Ltd.

JEM-A conversion adapter TS-JEMA series DC12V to 24V specifications TS-JEMA33

Seiwa Disaster Prevention Co., Ltd.

$117.00

50+ people viewing

Last viewed: 16 hours ago

Signal Converters
JEM-A conversion adapter TS-JEMA series DC24V specification TS-JEMA32-Seiwa Disaster Prevention Co., Ltd.

JEM-A conversion adapter TS-JEMA series DC24V specification TS-JEMA32

Seiwa Disaster Prevention Co., Ltd.

$117.00

60+ people viewing

Last viewed: 16 hours ago

Signal Converters
JEM-A conversion adapter TS-JEMA series DC6V specification TS-JEMA36 (AC adapter included)-Seiwa Disaster Prevention Co., Ltd.

JEM-A conversion adapter TS-JEMA series DC6V specification TS-JEMA36 (AC adapter included)

Seiwa Disaster Prevention Co., Ltd.

$117.00

50+ people viewing

Last viewed: 16 hours ago

Signal Converters
JEM-A control adapter TS-IFU series DC12V to 24V specifications TS-IFU13-Seiwa Disaster Prevention Co., Ltd.

JEM-A control adapter TS-IFU series DC12V to 24V specifications TS-IFU13

Seiwa Disaster Prevention Co., Ltd.

$117.00

40+ people viewing

Last viewed: 16 hours ago

Signal Converters
JEM-A control adapter TS-IFU series DC24V specification TS-IFU12-Seiwa Disaster Prevention Co., Ltd.

JEM-A control adapter TS-IFU series DC24V specification TS-IFU12

Seiwa Disaster Prevention Co., Ltd.

$117.00

60+ people viewing

Last viewed: 4 hours ago

Signal Converters
JEM-A control adapter TS-IFU series DC6V specification TS-IFU16 (AC adapter included)-Seiwa Disaster Prevention Co., Ltd.

JEM-A control adapter TS-IFU series DC6V specification TS-IFU16 (AC adapter included)

Seiwa Disaster Prevention Co., Ltd.

$117.00

40+ people viewing

Last viewed: 6 hours ago

Signal Converters
Electric lock control board TS-EK01-Seiwa Disaster Prevention Co., Ltd.

Electric lock control board TS-EK01

Seiwa Disaster Prevention Co., Ltd.

$156.00

40+ people viewing

Last viewed: 10 hours ago

Glass Substrates
Electric lock controller TS-ACEK01-Seiwa Disaster Prevention Co., Ltd.

Electric lock controller TS-ACEK01

Seiwa Disaster Prevention Co., Ltd.

$422.50

50+ people viewing


View more products of Seiwa Disaster Prevention Co., Ltd.

About Company Handling This Product

Seiwa Disaster Prevention Co., Ltd.

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree