All Categories
History
Product
Flow controller for chemical liquids and pure water FLC4000RHandling Company
Toflo Corporation Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Electrical equipment noise value | Electrical section power supply | Electrical component current consumption | Electrical component comparison operation | Electrical section comparison output | Electrical section External analog input selection type | Electrical equipment operating environment temperature | Electrical section control and zone | Electrical equipment air supply pressure | Electrical section Analog output selection type (1 point) | Electrical section Fail output (flow meter abnormal output) | Electrical section Fail processing operation | Wetted part noise value | Wetted parts pressure resistance | Wetted part flow rate accuracy | Wetted parts Fluid | Wetted part Port size Tube end connection | Wetted parts Wetted parts material | Wetted parts responsiveness | Wetted part control accuracy | Wetted part Control flow range Supply pressure: A type | Wetted parts reproducibility | Wetted part supply pressure (primary side pressure) | Wetted parts operating temperature range/operating environment temperature | Wetted part Valve drive method | Wetted part cable/tube length |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
FLC4000R G08 |
Available upon quote |
80dB or less |
DC24V (±10%) |
0.3A or less When power is turned on (2.5A) |
Instantaneous value Upper and lower limit two-stage alarm output operation *1 contact when using Fail processing function |
Open collector output Output applied voltage: DC35V or less, sink current: 100mA or less (Vol=1.3V) |
4-20mA input resistance 20Ω, 0-5V input resistance 1MΩ, 1-5V input resistance 1MΩ, input method: single-ended input (not isolated from power supply) |
15~40℃ Humidity below 80% (no condensation) |
PID control method (Zone PID: up to 6 divisions) |
0.4~0.5MPa (G) (dry air) |
4-20mA output load resistance 300Ω or less, 0-5V output load resistance 1kΩ or more, 1-5V output load resistance 1kΩ or more |
Open collector output Output applied voltage: DC35V or less, sink current: 100mA or less (Vol=1.3V) |
A. Valve full close and Fail output operation in case of measurement failure |
80dB or less |
Wetted part 0.5MPa (G), Control air part 0.4MPa (G) |
F.S.±1.0% |
Pure water, chemical liquid (fluids listed in the electrical equipment section) |
Tube diameter: φ1/4 φ6.35×φ4.35 |
PTFE, NEW PFA |
Within 3s |
R.D.±2.0% Less than 50mL/min: ±1mL |
30~300mL/min |
±0.5% |
0.05~0.3MPa (G) Differential pressure: 0.05MPa (G) or more |
0~50℃ (normally 20℃) / 15~40℃ Humidity 80% or less (no condensation) |
Pneumatic control valve |
Cable with SMB connector: 3m, control air tube φ4 x φ2: max. 2m |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
