All Categories
History
Product
Inlet M-Series AC-M50PB168Handling Company
Echo Electronics Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Voltage drop | Overload | Drop impact test | Withstand voltage | Impact resistance | Heat resistance | Moisture resistance | Cold resistance | Repetitive motion | Insulation resistance | Terminal strength | Thermal shock test | Temperature rise | Pseudo short circuit | Contact resistance | Insertion/extraction force | Life test | Mounting part strength | Solder heat resistance | Solderability | Plug prying strength | Pin strength | Screw mounting strength | Ammonia test |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
AC-M50PB168 |
Available upon quote |
Voltage drop less than 50mV |
No short circuits, burnouts, etc. |
No damage, mechanical or electrical abnormalities. |
AC4000V, leakage current 2mA or less. |
To withstand blows |
Satisfies appearance structure, withstand voltage, insulation resistance, contact resistance, contact resistance fluctuation, and terminal strength. |
Satisfies appearance structure, withstand voltage, insulation resistance, contact resistance, contact resistance fluctuation, and terminal strength. |
Satisfies appearance structure, withstand voltage, insulation resistance, contact resistance, contact resistance fluctuation, and terminal strength. |
Satisfy the temperature rise term based on insulation resistance. |
500MΩ or more after 1 minute |
There shall be no damage to the terminals that would be harmful in actual use, such as damage or falling off. However, bending of the terminal is permitted. |
Satisfy the temperature rise term based on insulation resistance. |
30deg or less |
Do not ignite. |
Must be 20mΩ or less. Fluctuation in contact resistance due to vibration is less than 10mΩ |
Insertion force: 4.5kgf or less |
Satisfy the insulation resistance and withstand voltage requirements. |
There should be no lifting or falling out of the main body from the compatible metal chassis. |
There shall be no abnormalities such as deformation of appearance. |
At least 95% of the dipped area must be covered with solder. |
No damage, mechanical or electrical abnormalities. |
No damage, mechanical or electrical abnormalities. |
No abnormalities such as cracks, chips, or cracks. |
There should be no cracks or damage to the terminals. |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
