All Categories

History

Integrated in-line sensor process refractometer PRM series-PRM-100α DX
Integrated in-line sensor process refractometer PRM series-ATAGO CO.,LTD.

Integrated in-line sensor process refractometer PRM series
ATAGO CO.,LTD.

ATAGO CO.,LTD.'s Response Status

Response Rate

100.0%

Response Time

32.6hours

Relatively Fast Response


About This Product

■Remove waste for ultimate simplicity

The DX series has succeeded in reducing weight while retaining the same performance as PRM-100α. The sophisticated and compact silver casing also contributes to SDGs by conserving resources. By attaching it to the piping of manufacturing plants for liquid products such as food and medicine, various industrial liquid replenishment equipment, cleaning equipment, dilution/mixing/preparation equipment, etc., it is possible to adjust the refractive index, Brix, concentration, moisture content, and mixing of various solutions. You can continuously manage ratios, etc.

■Detection section and calculation display section

It is divided into two parts: the "detection section", which is built into piping or directly attached to the tank, and the "calculation display section", which is attached to a control box, etc. The detection section and calculation display section are connected with a single cable, and a standard 15m cable is included (can be extended up to 200m). The detection unit outputs refractive index and temperature data as RS-485 digital signals to the calculation display unit. Also, power is supplied from the calculation display section to the detection section.

■Detect abnormalities quickly with alarm function

This function outputs an alarm signal when a measured value exceeding a preset control range is detected. This function is used to quickly discover inconsistencies in sample liquids on the factory production line. You can set the upper and lower limits of the control range for conforming products in processes that incorporate an in-line refractometer, or the number of seconds after which nonconforming measurements are continuously measured to output an alarm. Using relay drive, it is possible to detect and control the occurrence of abnormal values ​​by inputting to the alarm lamp lighting sequencer, etc.

■Easy concentration management with user scale registration

In addition to Brix and refractive index, it can be customized to a user scale that directly displays the dedicated concentration of the sample solution. You can register the user scale by preparing the "refractive index vs. concentration (for each temperature)" data of a liquid sample and sending the text file via RS-232C.

■Achieved 40% reduction in cutting amount

As part of the SDGs, a project has been launched to make products smaller. The product that was born was PRM-100α DX. By downsizing the product, we reduced the amount of metal parts to be cut, making it a more sustainable product.

■Wide range of measurement and sufficient accuracy

It can measure a wide range of Brix 0.00 to 80.0% with high accuracy of ±0.1%. We respond to a variety of needs, including a wide variety of dedicated scales and intrinsically safe explosion-proof models.

  • Product

    Integrated in-line sensor process refractometer PRM series

Share this product


20+ people viewing

Last viewed: 12 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Integrated in-line sensor process refractometer PRM series

Image Part Number Price (excluding tax) Measurement accuracy Measuring range Temperature compensation range Resolution Upper and lower limit settings Data output Cable Alarm output Cat.No.
Integrated in-line sensor process refractometer PRM series-Part Number-PRM-100α DX

PRM-100α DX

Available upon quote

Refractive index (nD): ±0.00010 Brix (concentration): ±0.05% Temperature (℃): ±0.1℃

Refractive index (nD): 1.32000~1.55700 Brix (concentration): 0.00~100.00% Temperature (℃): -5.0~160.0℃

5.0~100.0℃

Refractive index (nD): 0.00001/0.0001 Brix (concentration): 0.01%/0.1% Temperature (℃): 0.1℃

Upper and lower limits of management value can be set by key operation

RS-232C, current DC4~20mA

Detection section - Calculation display section (power supply 12V and RS-485) Length standard 15m (up to 200m possible)

Open collector output for upper and lower limit settings (output for alarm)

3676

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Abbe Refractometers Products

Other products of ATAGO CO.,LTD.

Reviews shown here are reviews of companies.


View more products of ATAGO CO.,LTD.

About Company Handling This Product

Response Rate

100.0%


Response Time

32.6hrs

Company Overview

Atago Co., Ltd., established in 1940 and headquartered in Tokyo, Japan, is a manufacturer that specializes in ...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree