Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor-P302-62EF2

Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor
Platts Co., Ltd.

Platts Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

0.4hours

Very Fast Response

About This Product

■ High back support functionThe back bottom is divided into "high back: head -back" and "low back: waist", and each angle can be adjusted by electric.

■ Knee -position fitting function that suppresses the gap when raising the backThe fitting function of the knee position is adjusted to the length of the user's thighs, and the flexing position of the knee leg bottom can be adjusted in two steps without changing the parts, so it supports a comfortable backing with less gaps.

■ Natural and comfortable reclining operationWith 1 button operation, the low back, highback, and knees move while adjusting the angle of the back and knees, and realizes a comfortable reclining posture.

■ Reduction of aspiration riskWhen the back is raised, the angle of the neck is adjusted, the abdominal pressure is reduced, and the posture that is easy to swallow can be reproduced.

■ Pressure ulcer (bed speech) Reduction of risk (displacement, reducing pressure)The back -rise using the high back support function can reduce the gap and the pressure on the body compared to the conventional background.

■ In a posture that is easy to breatheReduces back pressure and abdominal pressure, expands the diaphragm, and creates a comfortable posture that is easy to breathe.

■ We support a wide range of positioning from the back to those who are pregnant.Even if you are on the back, if you can match the high back support angle to the curvature of the spine, you can properly position it when you raise your back.

■ Vertical lifting mechanism that can be installed in space savingThe bed rises vertically without swinging when lifting and down, so the installation area is small.

■ Easy switching between feet raising and lowering toesYou can switch the angle of the toe with one touch. It can also be used to reduce the edema of the legs.

■ Corresponds to the use of various optionsThe gap between the floor and the base frame is 7.0cm.

■ Infusion bar mounting holeThere is a hole for attaching drip rods on a total of four left and right sides of the head side and the side.

■ Hook for Harunbag, Nurse Call Holder/Universal Hook
■ angle meterAn angle meter that can be attached to the bottom. You can perform a back -raising operation while checking the appropriate angle.

■ Equipped with LINAK motorEquipped with a Danish Linak motor with excellent silent and waterproof (IPX6) (IPX4 only for high back motors).

■ Rechargeable batteryBattery units are available optionally so that they can be used in the event of a power outage or in places without a power supply (battery requires charging).

■ Others・ The center of the side rail is possible
・ Easy -to -use hand switch
・ Casters with excellent driving and operability
・ Side rail storage holder

Model
There are 7 models for this product.

Product
Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor

Handling Company
Platts Co., Ltd.

340+ people viewing

Last viewed: 49 minutes ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

7 Models of Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor

Click on the part number for more information about each product

Part Number	Price (excluding tax)	type	Color	full length	Mattress compatible dimensions	mass	packing	Material	High back angle	Back -raising angle	Knee -raising angle	Floor surface	Rated voltage	Rated power consumption	Motor club	Maximum user weight	country of origin
P302-62EF2	$ 4,784.00〜	Resin board	natural brown	212.0cm	Total length 191.0cm, width 83.0cm	105.5kg	5 Packing	Body: Steel, ABS resin, head footboard: PE resin	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62ff2	$ 4,784.00〜	Resin board	Dark brown	212.0cm	Total length 191.0cm, width 83.0cm	105.5kg	5 Packing	Body: Steel, ABS resin, head footboard: PE resin	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62AF2	$ 4,784.00〜	Wooden board	natural brown	212.0cm	Total length 191.0cm, width 83.0cm	110.5kg	5 Packing	Body: Steel, ABS resin, head / footboard: print paper makeup board, natural wood urethane resin painting	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62CF2	$ 4,784.00〜	Wooden board	Dark brown	212.0cm	Total length 191.0cm, width 83.0cm	110.5kg	5 Packing	Body: Steel, ABS resin, head / footboard: print paper makeup board, natural wood urethane resin painting	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62bf2	$ 4,784.00〜	Steelboard	natural brown	212.0cm	Total length 191.0cm, width 83.0cm	109.0kg	5 Packing	Body: Steel, ABS resin, head footboard: steel, print paper makeup fiber plate	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62df2	$ 4,784.00〜	Steelboard	Dark brown	212.0cm	Total length 191.0cm, width 83.0cm	109.0kg	5 Packing	Body: Steel, ABS resin, head footboard: steel, print paper makeup fiber plate	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam
P302-62GE2	$ 5,161.00〜	Orthopedic board	-	212.0cm	Total length 191.0cm, width 83.0cm	108.5kg	5 Packing	Body: Steel, ABS resin, head footboard: steel	0 to 20 degrees	0 to 73 degrees	23 degrees (linked)	29.0 ~ 68.0cm	AC100 ~ 240V	150W	Made by LINAK	138kg / Safety operating load: 174kg (1,700N)	Vietnam

Click on the part number for more information about each product

Other products of Platts Co., Ltd.

Reviews shown here are reviews of companies.

Electric bed for nursing home Electric bed Adel Posiature Bed Series Fixed leg specification (LCD hand switch) with electric high back support function 3 motors

Platts Co., Ltd.

$3,217.50

240+ people viewing

Last viewed: 53 minutes ago

Response time: 0.36 hours

7 models listed

Electric bed for nursing homes Ardel Posiating Bed Series Fixed leg specifications (standard switch) Instead of linked high back support function 2 motors

Platts Co., Ltd.

$2,541.50

390+ people viewing

Last viewed: 27 minutes ago

Response time: 0.36 hours

7 models listed

Electric bed for nursing home Electric bed Adel Posiating Bed Series Fixed leg specifications (standard hand switch) with electric high back support 3 motors

Platts Co., Ltd.

$2,769.00

230+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

Electric bed for long -term care facilities Ardel positioning bed Series 4 -wheel lock specifications (LCD hand switch) With electric high back support function 3 motors

Platts Co., Ltd.

$3,737.50

360+ people viewing

Last viewed: 53 minutes ago

Response time: 0.36 hours

3 models listed

Electric bed for nursing homes Ardel positioning bed Series 4 wheel lock specifications (standard hand switch) Instead of linked high back support function 2 motors

Platts Co., Ltd.

$3,068.00

310+ people viewing

Last viewed: 28 minutes ago

Response time: 0.36 hours

3 models listed

Electric beds for nursing homes Ardel Posi -positioning bed Series 4 -wheeled lock specifications (standard switch) with electric high back support 3 motors

Platts Co., Ltd.

$3,289.00

260+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

3 models listed

Electric bed for nursing homes Ardel positioning bed Series center lock specification (LCD hand switch) with electric high back support function 3 motors

Platts Co., Ltd.

$4,264.00

340+ people viewing

Last viewed: 20 minutes ago

Response time: 0.36 hours

3 models listed

Electric bed for nursing homes Ardel positioning bed Series center lock specification (standard switch) Instead of linked high back support function 2 motors

Platts Co., Ltd.

$3,588.00

280+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

3 models listed

Electric bed for long -term care facilities Ardel positioning bed Series center lock specification (standard switch) with electric high back support function 3 motors

Platts Co., Ltd.

$3,815.50

260+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

3 models listed

Electric bed for nursing homes Ardel Basic Bed Series Fixed leg specifications (LCD switch) 3 Motors

Platts Co., Ltd.

$2,918.50

330+ people viewing

Last viewed: 55 minutes ago

Response time: 0.36 hours

Long -sidrail for beds for medical facilities (2 poses)

Platts Co., Ltd.

$123.50

280+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

3 models listed

Regular side rails for beds for medical facilities (2 posters)

Platts Co., Ltd.

$84.50

250+ people viewing

Last viewed: 8 hours ago

Response time: 0.36 hours

3 models listed

View more products of Platts Co., Ltd.

About Company Handling This Product

Platts Co., Ltd.

Response Rate

100.0%

Response Time

0.4hrs

Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor Platts Co., Ltd.

Platts Co., Ltd.'s Response Status

About This Product

■ High back support function

■ Knee -position fitting function that suppresses the gap when raising the back

■ Natural and comfortable reclining operation

■ Reduction of aspiration risk

■ Pressure ulcer (bed speech) Reduction of risk (displacement, reducing pressure)

■ In a posture that is easy to breathe

■ We support a wide range of positioning from the back to those who are pregnant.

■ Vertical lifting mechanism that can be installed in space saving

■ Easy switching between feet raising and lowering toes

■ Corresponds to the use of various options

■ Infusion bar mounting hole

■ Hook for Harunbag, Nurse Call Holder/Universal Hook

■ angle meter

■ Equipped with LINAK motor

■ Rechargeable battery

■ Others

7 Models of Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor

P302-62EF2

P302-62ff2

P302-62AF2

P302-62CF2

P302-62bf2

P302-62df2

P302-62GE2

Other products of Platts Co., Ltd.

About Company Handling This Product

Electric bed for medical facilities Aspino positioning bed Series center lock specification (standard hand switch) 2 Motor
Platts Co., Ltd.