Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10-SA-10

Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10
Saito Shokai Co., Ltd.

About This Product

■Humidity test: Temperature 40℃ / Humidity 99% After 48 hours, no rustSA-10 is a water-soluble clear lacquer that contains acrylic acid resin and is a rust and discoloration inhibitor. The coating is thin and transparent, so it is effective in preventing rust and discoloration of steel without damaging the underlying material. Can be dried at room temperature.

Our original water-soluble rust preventive agent. Since it is water-soluble, it can be applied while wet and is easy to handle. It has good drying properties and can be dried using any method including room temperature, heating, and hot air. It is a colorless and transparent thin film with a beautiful luster. There is no yellowing of the coating film due to ultraviolet rays. It has the hardness unique to acrylic resins and is also effective as a protective coating. Effective in preventing rust and discoloration of metal surfaces. This product was developed as a replacement for the conventional product that we had been using for many years, but it has been discontinued.

■Main uses・Rust prevention (steel, casting, non-ferrous metals, etc.)
- Preventing discoloration (steel, casting, non-ferrous metals, etc.)
- Rust prevention and discoloration prevention after various plating (gold plating, nickel plating, zinc plating, copper plating, etc.)
・Rust prevention and discoloration prevention after black dyeing parka treatment
・Top coat after various surface treatments
・Other rust prevention and discoloration prevention treatments in general
・Protective film: Has the unique hardness of acrylic acid resin and is effective as a protective film.

■Features・The product is non-toxic and does not cause pollution.
・Since thinner is not used, there is no need to worry about ignition.
・There is no yellowing of the coating film due to ultraviolet rays. (Colorless and transparent with a beautiful luster)

■Drying timeAt a liquid temperature of 40℃, it will be dry to the touch in about 30 minutes.

■NotesAfter applying SA-10 to the products, stack them up and tie them up after they are completely dry.

■Removal methodIf it gets on your hands, soap is sufficient. For the product, it is best to immerse it in a commercially available weak alkaline detergent or wipe it off with an alcohol or petroleum solvent.

■Related laws and regulations・Organic solvent: falls under the category 2 organic solvent under the Organic Solvent Poisoning Prevention Regulations.
・Dangerous goods: Not classified as dangerous goods according to the Fire Service Act.

Model
There are 1 models for this product.

Product
Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10

Handling Company
Saito Shokai Co., Ltd.

Categories

Protective Materials & Equipment

Corrosion Inhibitors

60+ people viewing

Last viewed: 4 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10

Image	Part Number	Price (excluding tax)	Packing style
	SA-10	Available upon quote	17kg oil can

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

EP-10 (Dehumidifying penetrating rust preventive agent)

Toyo Yaku Kagaku Kogyo Co., Ltd.

260+ people viewing

Last viewed: 42 minutes ago

Response time: 12.49 hours

Corrosion Inhibitors

101 (solvent diluted rust inhibitor)

Toyo Yaku Kagaku Kogyo Co., Ltd.

240+ people viewing

Last viewed: 42 minutes ago

Response time: 12.49 hours

Corrosion Inhibitors

Metal degreasing cleaning rust preventive agent TIWS-DT500

Takahashi Metal Co., Ltd.

210+ people viewing

Last viewed: 3 hours ago

Response time: 23.86 hours

Corrosion Inhibitors

2 models listed

Silica gel desiccant for packaging Various silica gel packages (A type)

Technos Nakata Co., Ltd.

100+ people viewing

Last viewed: 7 hours ago

Response time: 47.68 hours

Corrosion Inhibitors

3 models listed

Lanolin (antirust additive)

Toyo Yaku Kagaku Kogyo Co., Ltd.

270+ people viewing

Last viewed: 37 minutes ago

Response time: 12.49 hours

Corrosion Inhibitors

Water-soluble rust preventive agent for metals Inconspicuous water marks Outstanding rust preventive power TIWS-AEF80

Takahashi Metal Co., Ltd.

140+ people viewing

Last viewed: 22 hours ago

Response time: 23.86 hours

Corrosion Inhibitors

Silica gel desiccant for packaging Various silica gel packages (Type B)

Technos Nakata Co., Ltd.

100+ people viewing

Last viewed: 21 hours ago

Response time: 47.68 hours

Corrosion Inhibitors

3 models listed

Rust-proof shrink (heat shrink) film

CSJ Co., Ltd.

290+ people viewing

Last viewed: 42 minutes ago

Response time: 27.88 hours

Corrosion Inhibitors

15 models listed

Internal rust inhibitor inner wax

Japan Wax Oil Sales Co., Ltd.

90+ people viewing

Last viewed: 10 hours ago

Corrosion Inhibitors

Oxide film penetrating type non-porous anti-rust coating paint Strong anti-rust scepter KRYM-SPT101P-4kg

20+ people viewing

Last viewed: 3 hours ago

Corrosion Inhibitors

Zinc spray epoxy primer

Kimura Shoji Co., Ltd.

280+ people viewing

Last viewed: 42 minutes ago

Corrosion Inhibitors

2 models listed

High -falling plating compensation material Magnesium containing zinc unpainted Mazax

Nissin Industry Co., Ltd.

390+ people viewing

Last viewed: 8 hours ago

Corrosion Inhibitors

15 models listed

See More Corrosion Inhibitors Products

Other products of Saito Shokai Co., Ltd.

Reviews shown here are reviews of companies.

Plating pre-treatment agent Electrolytic rust removal agent

Saito Shokai Co., Ltd.

50+ people viewing

Last viewed: 16 hours ago

Descalers

Electroplating chemicals Myamaster

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Electroplating basic chemicals

Saito Shokai Co., Ltd.

30+ people viewing

Last viewed: 4 hours ago

Electroplating electrode

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Alloy plating

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Electroless plating chemicals

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Impurity remover Renovate (metal impurity remover for nickel plating bath)

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Plating discoloration inhibitor Entech Entec CU-56

Saito Shokai Co., Ltd.

50+ people viewing

Last viewed: 4 hours ago

Post-plating treatment agent

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Reagents Various reagents

Saito Shokai Co., Ltd.

40+ people viewing

Last viewed: 4 hours ago

Water-soluble grinding fluid Carbon Cure

Saito Shokai Co., Ltd.

50+ people viewing

Last viewed: 1 hour ago

Abrasive Compounds

2 models listed

Electrodeposition paint Shinto Sbia

Saito Shokai Co., Ltd.

30+ people viewing

Last viewed: 17 hours ago

Surface Treatment Chemicals

View more products of Saito Shokai Co., Ltd.

About Company Handling This Product

Saito Shokai Co., Ltd.

Japan

Related search keywords

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10 Saito Shokai Co., Ltd.

About This Product

■Humidity test: Temperature 40℃ / Humidity 99% After 48 hours, no rust

■Main uses

■Features

■Drying time

■Notes

■Removal method

■Related laws and regulations

1 Models of Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10

SA-10

Customers who viewed this product also viewed

Other products of Saito Shokai Co., Ltd.

About Company Handling This Product

Related search keywords

Water-soluble rust preventive agent (water-soluble clear lacquer) SA-10
Saito Shokai Co., Ltd.