Transmission protocol converter IPM610M-IPM610M

Transmission protocol converter IPM610M
Hinox Co., Ltd.

About This Product

■Features・A protocol converter that comes standard with 2 ports of LAN interface, 1 port of V.24 interface, and 1 port of V.11 interface.
-Equipped with 4 digital inputs and outputs, so you can connect and control external wireless or other devices that require contact inputs and outputs as an optional feature.
-The RS-232C port on the back of this unit is a multi-functional port that supports not only start-stop synchronization but also various CDT and HDLC protocols, and can be easily used for communications other than FSK by connecting an external modem. Masu
・As we support software customization for each customer, we can flexibly respond to system construction with special communication rules.

Model
There are 1 models for this product.

Product
Transmission protocol converter IPM610M

Handling Company
Hinox Co., Ltd.

20+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Transmission protocol converter IPM610M

Image	Part Number	Price (excluding tax)	Applicable cable	Operation form	Communication method	Communication negotiation	Mass	Installation conditions	Installation location	Product lifespan	Corrosive gas	Insulation voltage	Insulation resistance	Housing	Humidity	Temperature	Power consumption	Equipment type	Radiated noise emissions	Vibration	Mounted connector (V.11 interface)	Mounting connector	External dimensions	Dust	Paint color	Number of lines (V.11 interface)	Number of lines	Input power	Transmission speed	Transmission method	Transmission protocol	Interface
	IPM610M	Available upon quote	Category 5 2 vs. UTP	24 hours (non-stop)	Ethernet	AUTO compatible (forced selection possible by setting)	Approximately 430g	Place it horizontally with at least 20mm of space left and right.	Indoor	10 years at +35℃ operation	No corrosive gas.	AC adapter input batch - FG 1,000V AC for 1 minute DC 500V for 1 minute between DC input batch and FG DI,DO,ALM batch-FG DC 500V for 1 minute	10MΩ or more with DC500V megger between AC adapter input batch and FG 10MΩ or more with DC500V megger between DC input batch and FG	Aluminum (A5052P), natural air cooling	20~90%RH (no condensation)	-10~+50℃ (Performance guaranteed)	20VA or less (when using AC adapter) 10W or less (when driven by DC power supply)	Stand-alone type	VCCI ClassA	3~10Hz 1G, 30 seconds 16.7Hz 0.2G 10 minutes	Back side of device: Standard DSUB15 pin (female) (M2.6 thread)	Front of device: RJ-45 (8-pole connector)	160 (W) x190 (D) x35 (H)	0.1mg/m3 or less No conductive dust.	Munsell 5Y7/1 Leather tone	1	2	AC100V±10% 50/60Hz (when using the attached AC adapter) DC12V (DC10.8V~DC18V) (For DC power supply drive)	10M/100M bit/sec	100BASE-T/10BASE-T	ARP, ICMP, TCP/IP, UDP/IP	IEEE802.3 compliant