All Categories

History

Analog general business radio IC-VM4525MFT-IC-VM4525MFT
Analog general business radio IC-VM4525MFT-Excelli Co., Ltd.

Analog general business radio IC-VM4525MFT
Excelli Co., Ltd.

Excelli Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

3.2hours

Very Fast Response


About This Product

■Features

・IC-VM4525MFT (ICVM4525MFT) is a general business radio manufactured by ICOM. - A radio that achieves stable communication with little interference even in environments where various radio waves are mixed, such as in urban areas. ・It is a highly durable body that uses an aluminum die-cast chassis and has passed tests in accordance with the MIL standard (MIL-STD-810G) established by the U.S. Department of Defense. ・The output can be switched to a powerful 25W, which is difficult to mix up in urban areas, 10W, which is useful in places with little radio wave interference, and 5W, which can suppress the impact on peripheral devices (cloning software required). - Compatible with CTCSS (tone squelch) and CDCSS (squelch) to achieve quiet standby reception with less noise. - The front panel has IP54 dustproof and waterproof performance, so you can use it with confidence even in wet or dusty environments. ・In combination with the separately sold operation part separation kit RMK-3 and operation part separation cable, the front panel and main unit can be separated, allowing you to install only the front panel in a location where it is easier to operate. -Equipped with a full-dot LCD display and a backlight for easy visibility even in dark places and at night. You can check the settings and input commands at a glance. - By assigning any function to each programmable switch and customizing it, operability is further improved. ・It has IP54 dustproof and waterproof performance, so you don't have to worry about it breaking down even if it accidentally gets rained on while driving in the rain. - Compatible with DC12V vehicles. - Equipped with various other functions. Compander function to suppress noise during communication, timeout timer function, confidential conversation function (requires UT-109R/UT-110R sold separately), penalty timer function, DTMF signal encoder/decoder function, channel pitch can be set to 2.5/3.125kHz ・The connector on the radio side is N-J.

■Accessories

・Microphone HM-152 ・Mic hanger ・DC power cable ・Ground wire (for microphone hanger) ・Sponge (for option) ・Vehicle bracket ・Flat washer ×4 ・Bracket bolt x4 ・S washer × 4 ・Mounting screws x 4 ・Nuts x4 ・Tapping screw ×4 ·operating instructions ・Warranty

  • Product

    Analog general business radio IC-VM4525MFT

Share this product


80+ people viewing

Last viewed: 7 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Analog general business radio IC-VM4525MFT

Image Part Number Price (excluding tax) Power supply voltage Radio wave model Radio waves flying Waterproof Dustproof Weight Pass band width Communication method Total distortion and noise Antenna power Type Temperature range Current consumption Standard modulation input Maximum frequency deviation Local oscillation frequency tolerance Size Modulation method Frequency tolerance Frequency band Reception method Receiving sensitivity Occupied frequency bandwidth Driver licence Intermediate frequency Manufacturer Number of channels Spurious response Spurious emission intensity Antenna plug
Analog general business radio IC-VM4525MFT-Part Number-IC-VM4525MFT

IC-VM4525MFT

Available upon quote

DC13.8V±10%

16K0F3E

Approximately 1km in urban areas, approximately 2km in suburbs, and 10km or more visibility without obstacles

IPX4

IP5X

1.3kg

(Width of 6dB reduction) 12kHz or more (Width of reduction of 70dB) Within 25kHz

Single person method using breath talk

40dB or more (at 1kHz, 70% modulation)

+20%, -50% of the setting value at 5W~25W

Analog general business radio

-20℃~+60℃

Standby: 300mA or less
Maximum receiving output: 1.2A or less
When transmitting: H 25W 7.0A or less / L2 10W 5.5A or less / L1 5W 4.4A or less

-43.8dBm±3dB (at 1kHz, 70% modulation)

(with IDC) within ±5kHz, over ±2.5kHz

Within ±10×10^-6 (Oscillation is shared with transmission)

Height: 45 mm Width: 160 mm Depth: 150 mm

Variable reactance frequency modulation

Within ±10×10^-6

Analog 142.0000MHz~162.0375MHz

Double superheterodyne method

+3dBμVemf or less (20dBNQ)

Within 16kHz

License application required

1st 46.35MHz / 2nd 450kHz

ICOM (ICOM)

512ch

80dB or more

When antenna power exceeds 1W
(Out-of-band region) -80dB or less and 1mW or less
(Spurious area) -60dB or less

50Ω N type plug

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Simple Radio Products

Other products of Excelli Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Excelli Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

3.2hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree