All Categories

History

  1. Metoree
  2. Nozzles
  3. Misting Nozzles
  4. Energy-saving water spray humidification system Mist Nozzle (CHAMPION CORPORATION Co., Ltd.)
Energy-saving water spray humidification system Mist Nozzle-Mist Nozzle
Energy-saving water spray humidification system Mist Nozzle-CHAMPION CORPORATION Co., Ltd.

Energy-saving water spray humidification system Mist Nozzle
CHAMPION CORPORATION Co., Ltd.

About This Product

This is a product adapted for civilian use based on technology developed by the Japan Aerospace Exploration Agency (JAXA). Mist is a new environmental product that can be used for humidification, cooling, air purification, etc. as it is a small droplet that will not be destroyed or wet even when it hits an object. It is a two-fluid water spray humidification system, and the CO2 emissions required for humidification are less than 1/20th compared to steam-type humidification. Patent No. 3826196 Liquid curtain forming Air Blast atomization nozzle. Patent No. 3498142 Wall-impinging type liquid atomization nozzle.

■Development background

Clean rooms for semiconductors, FPDs, etc. require air conditioning and humidification throughout the year to control temperature and humidity, and they consume approximately 10 times more energy per floor area than general office buildings. In winter, when it is necessary to humidify the outside air in a clean room to indoor conditions, and when high-precision humidity control of ±5% is required, steam humidification is usually used. As a way to implement such high-precision control while saving energy, we have developed a water spray humidification system that uses high-pressure air and pure water by repurposing the technology developed by JAXA.

■POINT

・Technology to maximize the combustion efficiency of JET engines ・Homogeneity of droplets ・Need for ultra-fine grain size ・Split the liquid into fine particles by turning the liquid into a thin film and exposing it to airflow.

■System overview

This system consists of a two-fluid nozzle that sprays mist, a control valve that controls the amount of water sprayed, a humidity sensor, a pump, and a control device. The average particle size of the mist sprayed from the two-fluid nozzle is 5 to 20 μm, and by establishing a time-proportional control technology for the ON/OFF humidification valve, highly accurate humidity control is possible.

■System features

・Excellent energy-saving effect: By using the heat generated in the clean room to directly vaporize the mist, it reduces steam humidification in the outside air conditioner. It also leads to a reduction in the energy consumption of the refrigerator, resulting in double energy savings. ・Low CO2 emissions: Comparing the CO2 emissions for humidifying 1 ton of water, the steam type produces 160 kg-CO2 per year, while this system produces less than 1/20th the emissions. ・Excellent controllability: For high-pressure fluid nozzles, where it is difficult to continuously control the amount of spray, we use our unique time proportional control technology to ensure excellent controllability. ・No leakage of water droplets: Our unique technology prevents the leakage of water droplets from the nozzle, which conventionally occurs when starting and stopping spraying.

  • Product

    Energy-saving water spray humidification system Mist Nozzle

Share this product


310+ people viewing

Last viewed: 3 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Energy-saving water spray humidification system Mist Nozzle

Image Part Number Price (excluding tax)
Energy-saving water spray humidification system Mist Nozzle-Part Number-Mist Nozzle

Mist Nozzle

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Introducing a pouch with a spout that allows you to attach your favorite dispenser PUMPS SELECT/Trigger Pumps-Cowpack Co., Ltd.

Introducing a pouch with a spout that allows you to attach your favorite dispenser PUMPS SELECT/Trigger Pumps

Cowpack Co., Ltd.

140+ people viewing

Last viewed: 5 hours ago

Response time: 11.93 hours

Misting Nozzles

18 models listed

Multi head nozzle-Zide Enterprise Ltd.

Multi head nozzle

Zide Enterprise Ltd.

280+ people viewing

Misting Nozzles

3 models listed

Mist nozzle standard nozzle-green. Com Japan Co., Ltd.

Mist nozzle standard nozzle

green. Com Japan Co., Ltd.

240+ people viewing

Response time: 17.63 hours

Misting Nozzles

4 models listed

Mist nozzle Cleanable nozzle-green. Com Japan Co., Ltd.

Mist nozzle Cleanable nozzle

green. Com Japan Co., Ltd.

230+ people viewing

Last viewed: 15 hours ago

Response time: 17.63 hours

Misting Nozzles

5 models listed

Mist nozzle Stainless steel cleanable nozzle-green. Com Japan Co., Ltd.

Mist nozzle Stainless steel cleanable nozzle

green. Com Japan Co., Ltd.

260+ people viewing

Response time: 17.63 hours

Misting Nozzles

5 models listed

Mist nozzle nozzle plug-green. Com Japan Co., Ltd.

Mist nozzle nozzle plug

green. Com Japan Co., Ltd.

420+ people viewing

Response time: 17.63 hours

Misting Nozzles
Full cone pattern two-fluid nozzle single mist nozzle KAM type-Everloy Trading Co., Ltd.

Full cone pattern two-fluid nozzle single mist nozzle KAM type

Everloy Trading Co., Ltd.

390+ people viewing

Response time: 0.20 hours

Misting Nozzles

4 models listed

Slip Lok Nozzle Fitting 3/8” Slip Lok Mist Nozzle Fitting-green. Com Japan Co., Ltd.

Slip Lok Nozzle Fitting 3/8” Slip Lok Mist Nozzle Fitting

green. Com Japan Co., Ltd.

400+ people viewing

Last viewed: 1 hour ago

Response time: 17.63 hours

Misting Nozzles

2 models listed

Slip Lok Nozzle Fitting 1/4” Slip Lok Mist Nozzle Fitting-green. Com Japan Co., Ltd.

Slip Lok Nozzle Fitting 1/4” Slip Lok Mist Nozzle Fitting

green. Com Japan Co., Ltd.

330+ people viewing

Last viewed: 3 hours ago

Response time: 17.63 hours

Misting Nozzles

2 models listed

Liquid atomization spray nozzle-CST Co., Ltd.

Liquid atomization spray nozzle

CST Co., Ltd.

210+ people viewing

Last viewed: 6 hours ago

Response time: 18.40 hours

Misting Nozzles

20 models listed

Nozzle adapter 3 mist nozzle cluster-green. Com Japan Co., Ltd.

Nozzle adapter 3 mist nozzle cluster

green. Com Japan Co., Ltd.

190+ people viewing

Response time: 17.63 hours

Misting Nozzles
Nozzle adapter 5 mist nozzle cluster-green. Com Japan Co., Ltd.

Nozzle adapter 5 mist nozzle cluster

green. Com Japan Co., Ltd.

250+ people viewing

Response time: 17.63 hours

Misting Nozzles
See More Misting Nozzles Products

Other products of CHAMPION CORPORATION Co., Ltd.

Reviews shown here are reviews of companies.

Injection mold parts core pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts core pin

CHAMPION CORPORATION Co., Ltd.

370+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Core Pins

3 models listed

Coating for die casting molds and cast pins MARC-D/MARC-D plus-CHAMPION CORPORATION Co., Ltd.

Coating for die casting molds and cast pins MARC-D/MARC-D plus

CHAMPION CORPORATION Co., Ltd.

540+ people viewing

Last viewed: 2 hours ago

Response time: 6.05 hours

Casting Dies

4 models listed

Injection mold parts needle pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts needle pin

CHAMPION CORPORATION Co., Ltd.

340+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Core Pins

4 models listed

Injection mold parts nest-CHAMPION CORPORATION Co., Ltd.

Injection mold parts nest

CHAMPION CORPORATION Co., Ltd.

180+ people viewing

Response time: 6.05 hours

Injection mold parts Runner lock pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts Runner lock pin

CHAMPION CORPORATION Co., Ltd.

380+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Angular Pins

2 models listed

Injection mold parts center pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts center pin

CHAMPION CORPORATION Co., Ltd.

320+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Core Pins

4 models listed

Injection mold parts sleeve-CHAMPION CORPORATION Co., Ltd.

Injection mold parts sleeve

CHAMPION CORPORATION Co., Ltd.

260+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Angular Pins
Injection mold parts guide pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts guide pin

CHAMPION CORPORATION Co., Ltd.

440+ people viewing

Response time: 6.05 hours

Core Pins

5 models listed

Injection mold parts 45 degree pin-CHAMPION CORPORATION Co., Ltd.

Injection mold parts 45 degree pin

CHAMPION CORPORATION Co., Ltd.

270+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Angular Pins

2 models listed

Die casting mold parts shunter-CHAMPION CORPORATION Co., Ltd.

Die casting mold parts shunter

CHAMPION CORPORATION Co., Ltd.

320+ people viewing

Last viewed: 3 hours ago

Response time: 6.05 hours

Slide Core Units
Press mold parts die inserts-CHAMPION CORPORATION Co., Ltd.

Press mold parts die inserts

CHAMPION CORPORATION Co., Ltd.

190+ people viewing

Response time: 6.05 hours

Arm-CHAMPION CORPORATION Co., Ltd.

Arm

CHAMPION CORPORATION Co., Ltd.

140+ people viewing

Response time: 6.05 hours


View more products of CHAMPION CORPORATION Co., Ltd.

About Company Handling This Product

CHAMPION CORPORATION Co., Ltd.

  • Japan

Related search keywords

Misting Nozzles
Misting Nozzles　CHAMPION CORPORATION Co., Ltd.
CHAMPION CORPORATION Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree