Seal nameplate
Omura Nameplate Research Institute Ltd.

About This Product

Most colors are available, and there are a variety of fonts and materials, so it is an item with a high degree of freedom.

■FeaturesSeals and stickers are completed by printing on materials such as YUPO, PVC, silver matte, and Tetron on a rotary press and cutting them out using a cutting blade. Almost any color can be produced, and there are a variety of fonts and materials, so it is a product with a high degree of freedom. It is a very common nameplate that is used all around us. The initial cost is quite high because the original plate, printing plate, and cutting blade are basically required. (Minimum 10,000 yen) The letters and material are flat and uniform. For installation, use the adhesive glue that is included from the beginning.

The good thing about stickers is that the unit price is extremely low when you buy them in bulk, and you can make uniform products. The disadvantages are the initial cost and the unit price can be surprisingly high for small quantities. As with all types of printing, it takes a considerable amount of time to adjust the machine, so it is not suitable for small orders (100 sheets or less). The material changes depending on the intended use. There are manufacturing methods such as numbering, which follows the serial number in order, and half lamination, which involves adding the date of manufacture later with a ballpoint pen and pasting a protective sheet.

Model
There are 1 models for this product.

Product
Seal nameplate

Handling Company
Omura Nameplate Research Institute Ltd.

40+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Seal nameplate

Image	Part Number	Price (excluding tax)	Color	Deadline	Processing dimensions (mm)	Purpose of use	Place of use	Cost
	Seal nameplate	Available upon quote	For printing, any number of colors is possible; however, a printing plate is required for each color.	10~14 days for new items 7~10 days for repeat items	Up to about 300 x 200, plate thickness is about 0.05~0.15, and we can also manufacture products other than those listed on the left by special order.	Warning stickers, safety stickers, stickers, display stickers, company name stickers, scale stickers, machine stickers, etc.	Basically, it can be attached to flat surfaces, but since it is thin, it can also be attached to curved areas.	Initial cost is high (original plate, printing plate, cutting blade required) Price is high for small quantities and cheap for large quantities