Mechanical engraving-Mechanical engraving

Mechanical engraving
Omura Nameplate Research Institute Ltd.

About This Product

There are carvings and back carvings, and you can add your favorite color after carving. No initial cost.

■FeaturesFor engraving, characters are engraved on materials such as stainless steel, aluminum, acrylic, and PVC using an engraving machine. There are front carvings (upper row) and back carvings (lower row), and you can add your favorite color after carving. Since the letters are carved by rotating them with a cutting tool, they are basically a round Gothic typeface, and if you want to use a different typeface, you have to make an original plate from brass or other material. Engraving basically does not require a plate, so there is no initial cost. The text and material are uneven and have a three-dimensional feel. Installation is approximately 50/50 done with screws or double-sided sheets.

The beauty of engraving is that it can be carved into any material, and it can also be engraved on the finished product afterwards. The disadvantage is that the more characters there are, the higher the price is, so it is not suitable for mass production. The material changes depending on the intended use.

Model
There are 1 models for this product.

Product
Mechanical engraving

Handling Company
Omura Nameplate Research Institute Ltd.

30+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Mechanical engraving

Image	Part Number	Price (excluding tax)	Color	Deadline	Processing dimensions (mm)	Purpose of use	Place of use	Cost
	Mechanical engraving	Available upon quote	Since it is applied with a brush, any color can be used.Colors cannot overlap.	New/repeat products approximately 1 week	We can also manufacture items other than those listed on the left by special order, up to approximately 800 x 600, with a thickness of 0.5 or more that can be mounted on a stand.	Switchboard nameplates, company nameplates, precision scale plates, general machine nameplates, electrical machine nameplates, guide plates, press dies, etc.	Basically, it is attached to a flat surface using a double-sided sheet or screws, but it is also possible to engrave the object itself.	There is basically no initial cost, and it is suitable for small quantities. However, it becomes expensive if there are many characters, characters larger than 20 mm, or fonts other than round Gothic.