Offset printing
Omura Nameplate Research Institute Ltd.

About This Product

We print on aluminum, brass, stainless steel, etc. Most colors are available.

■FeaturesOffset printing prints on materials such as aluminum, brass, and stainless steel using a rotary press. Almost any color can be produced, and it is common to make a mold and press it out. The principle is the same as printing on paper such as newspapers, but printing on metal requires more effort such as base printing and surface coating. The initial cost is quite high because the original plate and printing plate are basically required. (Minimum 15,000 yen) The letters and material are flat, creating a clear and uniform nameplate. Installation is often done using a double-sided sheet.

The great thing about offset printing is that the unit price is extremely low for large quantities (over 10,000 sheets), and you can choose colors. The disadvantages are the initial cost and the lack of outdoor weather resistance. If the quantity is small, the unit price will be surprisingly high. This is not suitable for small orders (100 pieces or less) because it takes a considerable amount of time to adjust the machine. Printing on aluminum is common, but the material changes depending on the intended use. It is also possible to engrave the serial number, manufacturing date, etc. afterwards.

Model
There are 1 models for this product.

Product
Offset printing

Handling Company
Omura Nameplate Research Institute Ltd.

20+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Offset printing

Image	Part Number	Price (excluding tax)	Color	Deadline	Processing dimensions (mm)	Purpose of use	Place of use	Cost
	Offset printing	Available upon quote	For printing, any number of colors is possible; however, a printing plate is required for each color.	1 month for new products, 3 weeks for repeat products	Up to about 400 x 600 The plate thickness is about 0.1~1.0mm The thicker it is, the more difficult it is to print.	Control boards, warning nameplates, meters, scale nameplates, auto parts, key chains, bulk nameplates, etc.	Basically, it can be attached to a flat surface.Since it is thin, it can also be attached to a slightly curved surface.It can also be attached with bolts.	Initial cost is high (original plates and printing plates are required) Unit price is high for small quantities and cheap for large quantities