All Categories
History
Response Rate
100.0%
Response Time
8.6hours
Fast Response
Product
Instrumentation system equipment pH meter/ORP meter 2-wire liquid spectrometer FLXA21Handling Company
Yonei Co., Ltd.Categories
Image | Part Number | Price (excluding tax) | Power supply voltage | Power supply | Wiring terminal block | Wiring terminal | Installation altitude | Installation category (according to IEC 61010) | Display | Environmental conditions | Pollution degree (according to IEC 61010) | Body mass | External dimensions | Installation | Output signal | Input specifications | Logbook | Hold function | Burnout function | Housing color | Housing window | Housing structure | Housing case, cover | Housing | Data protection | Cable gland | Analog output | RoHS | REACH | PH201G communication | When using HART communication / When using PH201G | HART communication (HART 5) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
FLXA21 |
Available upon quote |
1 detector: 16 ~ 40V DC (pH / ORP, SC, DO), 17 ~ 40V DC (ISC) |
Standard 24V DC loop power system |
For M4 screws |
Pin terminals, round terminals, and fork terminals (Y terminals) can be used. |
2,000m or less |
I |
Monochrome LCD with touch panel (213 × 160 pixels) |
Ambient temperature: -20 ~ 55℃ |
2 |
Approximately 1kg |
144 x 144 x 151mm (width x height x depth) |
Pipe, panel, wall mounting (stainless steel fittings, optional) |
1 point, 4 ~ 20mA DC, 2-wire, input/output isolation |
Input impedance (1,012Ω or more) |
Record history and diagnostic data. Can be viewed from the screen. |
Can be |
Burndown: 3.6mA |
Silver Gray (Equivalent to Munsell 3.2PB7.4 / 1.2) |
Resin (polycarbonate) |
IP66 (excluding Canada), NEMA Type 4X (USA), CSA Type 3S / 4X (Canada) |
Resin (polycarbonate) |
1 detector: M20 x 3, sleeve x 1 |
EEPROM (for setting data and logbook storage), lithium battery (for clock) |
It is not attached to the main unit when shipped. Please install it by yourself. |
One data can be selected from the 1st detector measurement value, 2nd detector measurement value, or the calculated value of the two detectors. |
EN IEC 63000 (style 3.06 or later) |
Regulation EC 1907/2006 |
Can drive contacts of PH201G distributor (hold, failure, cleaning contacts) |
Burndown: 3.6mA (pH/ORP, SC, DO), 3.9mA (ISC) |
Up to 4 data can be selected from 1st detector measurement value, 2nd detector measurement value, and calculated value of 2 detectors |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
8.6hrs