All Categories

History

  1. Metoree
  2. Test Equipment
  3. Test Facilities
  4. JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S) (Marto Co., Ltd.)
JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)-40-6038
JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)-Marto Co., Ltd.

JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)
Marto Co., Ltd.

Marto Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

37.8hours

About This Product

■Summary

When using structural ceramics as parts, it is necessary to accurately understand the mechanical properties such as strength and toughness of the ceramics. JIS R1607 Fine Ceramics Fracture Toughness Test Method (SEPB method) has been established, which is considered the most important standard for material selection and material improvement.

■Features

1) Test pieces (3mm x 4mm x L36mm) compliant with JIS R 1601 can be used as is. You can also use 18mm after the bending strength test. 2) Processing (introducing) the pre-crack source can be applied to either the mechanical notch method or the Vickers indentation method to test specimens. 3) Detection of pop-in during pre-crack introduction is confirmed using both headphones and an indicator needle, so even first-time users can easily test it. 4) Since the press equipment is a manual pressurization system, there is little noise during pressurization, and the load can be stopped immediately after pop-in is detected.

■Specifications/Configuration

1) BI pre-cracker (MBK-603C): 1 unit 2) Pre-crack introduction press device (MZ-603): 1 unit *Pop-in sensor is also sold separately.

■Test method

1) Preparation of test piece JIS R1601〈Ceramicron MX-833〉 2) Introduction of pre-crack generation source Notching or Vickers (Knoop) indentation 3) Pre-crack introduction (pop-in) <Pre-crack introduction press equipment, BI pre-cracker> 4) Staining of pre-crack <Red magic, acetone> 5) Bending break test 3-point bending rupture test〈Bending tester MZ-250〉 6) Measurement of pre-crack length <microscope> 7) Calculation of fracture toughness value Kic= (PS) / (BW3/2) f (a/W) ×0.3101 (MPam 1/2) 8) Measurement results test record paper

  • Product

    JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)

Share this product


60+ people viewing

Last viewed: 14 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)

Image Part Number Price (excluding tax) Model Unit
JIS R 1607 compliant pre-crack introduction type fracture toughness test device (MZ-603S)-Part Number-40-6038

40-6038

Available upon quote

Fracture toughness test device MZ-603S

1 set

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

Ideal for the dryness of the material, the composite material, and the new material Ideal for sintering and research and development, a tabletop small electrical furnace NHK-170AF series-Nippon Ceramics Co., Ltd.

Ideal for the dryness of the material, the composite material, and the new material Ideal for sintering and research and development, a tabletop small electrical furnace NHK-170AF series

Nippon Ceramics Co., Ltd.

$2,080.00

450+ people viewing

Last viewed: 8 hours ago

Response time: 18.49 hours

Test Facilities

9 models listed

Universal testing machine zwickiLine up to 0.5kN-ZwickRoell Corporation

Universal testing machine zwickiLine up to 0.5kN

ZwickRoell Corporation

1210+ people viewing

Last viewed: 5 hours ago

Response time: 88.22 hours

Test Facilities

9 models listed

Manual charpie type impact test machine-Tokai Test Machine Manufacturing

Manual charpie type impact test machine

Tokai Test Machine Manufacturing

340+ people viewing

Last viewed: 3 hours ago

Response time: 48.66 hours

Test Facilities

2 models listed

Abel closed type automatic flash point tester-Tanaka Scientific Limited

Abel closed type automatic flash point tester

Tanaka Scientific Limited

40+ people viewing

Test Facilities
Tag closed type automatic flash point tester (8 series)-Tanaka Scientific Limited

Tag closed type automatic flash point tester (8 series)

Tanaka Scientific Limited

50+ people viewing

Last viewed: 18 hours ago

Test Facilities
Pensky Martens Sealed Automatic Flash Point Tester-Tanaka Scientific Limited

Pensky Martens Sealed Automatic Flash Point Tester

Tanaka Scientific Limited

50+ people viewing

Test Facilities
Cleveland open type automatic flash point tester (8 series)-Tanaka Scientific Limited

Cleveland open type automatic flash point tester (8 series)

Tanaka Scientific Limited

50+ people viewing

Test Facilities
Cleveland open type automatic flash point tester (100 series)-Tanaka Scientific Limited

Cleveland open type automatic flash point tester (100 series)

Tanaka Scientific Limited

40+ people viewing

Test Facilities
Rapid equilibrium closed type automatic flash point tester-Tanaka Scientific Limited

Rapid equilibrium closed type automatic flash point tester

Tanaka Scientific Limited

40+ people viewing

Last viewed: 14 hours ago

Test Facilities
Seta Sealed Flash Point Tester (Rapid Equilibrium Sealed Method) <Semi-automatic Type> Seta Flash Series 3-Tanaka Scientific Limited

Seta Sealed Flash Point Tester (Rapid Equilibrium Sealed Method) <Semi-automatic Type> Seta Flash Series 3

Tanaka Scientific Limited

40+ people viewing

Test Facilities
Seta Sealed Flash Point Tester (Rapid Equilibrium Sealed Method) <Semi-automatic Type> Seta Flash Series 3 Active Cool-Tanaka Scientific Limited

Seta Sealed Flash Point Tester (Rapid Equilibrium Sealed Method) <Semi-automatic Type> Seta Flash Series 3 Active Cool

Tanaka Scientific Limited

50+ people viewing

Test Facilities
Heat chamber box ABT-1000-CPI Ltd.

Heat chamber box ABT-1000

CPI Ltd.

50+ people viewing

Response time: 0.84 hours

Test Facilities
See More Test Facilities Products

Other products of Marto Co., Ltd.

Reviews shown here are reviews of companies.

Small size cutting of research samples Mini Lab Cutter (MC-110)-Marto Co., Ltd.

Small size cutting of research samples Mini Lab Cutter (MC-110)

Marto Co., Ltd.

110+ people viewing

Response time: 37.79 hours

Cutting Machinery

2 models listed

Small size cutting of metal materials Mini lab cutter for metals (MC-112)-Marto Co., Ltd.

Small size cutting of metal materials Mini lab cutter for metals (MC-112)

Marto Co., Ltd.

80+ people viewing

Last viewed: 21 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Small all-purpose cutting machine Lab Cutter (MC-120)-Marto Co., Ltd.

Small all-purpose cutting machine Lab Cutter (MC-120)

Marto Co., Ltd.

100+ people viewing

Last viewed: 5 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Small all-purpose cutting machine for metal materials Lab cutter for metals (MC-122)-Marto Co., Ltd.

Small all-purpose cutting machine for metal materials Lab cutter for metals (MC-122)

Marto Co., Ltd.

100+ people viewing

Last viewed: 3 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Multi-sized small specimen cutting machine Microcutter Reptum (MC-250) ① Swing arm method-Marto Co., Ltd.

Multi-sized small specimen cutting machine Microcutter Reptum (MC-250) ① Swing arm method

Marto Co., Ltd.

110+ people viewing

Last viewed: 2 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Multi-sized small specimen cutting machine Microcutter Reptum (MC-250) ②Slide table method-Marto Co., Ltd.

Multi-sized small specimen cutting machine Microcutter Reptum (MC-250) ②Slide table method

Marto Co., Ltd.

70+ people viewing

Last viewed: 20 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Continuous/shallow cut small sample high performance cutting step cutter (MC-171)-Marto Co., Ltd.

Continuous/shallow cut small sample high performance cutting step cutter (MC-171)

Marto Co., Ltd.

70+ people viewing

Last viewed: 5 hours ago

Response time: 37.79 hours

Cutting Machinery

3 models listed

Manual feed medium size cutting power cutter (MC-420)-Marto Co., Ltd.

Manual feed medium size cutting power cutter (MC-420)

Marto Co., Ltd.

70+ people viewing

Response time: 37.79 hours

Cutting Machinery

2 models listed

Upper blade type all-purpose cutting for medium-sized samples Crystal Cutter Neo Expensive (MC-623Ex)-Marto Co., Ltd.

Upper blade type all-purpose cutting for medium-sized samples Crystal Cutter Neo Expensive (MC-623Ex)

Marto Co., Ltd.

70+ people viewing

Last viewed: 7 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Cutting with ELID One-Two Cut III type (MX-833A₂G・EL)-Marto Co., Ltd.

Cutting with ELID One-Two Cut III type (MX-833A₂G・EL)

Marto Co., Ltd.

60+ people viewing

Last viewed: 21 hours ago

Response time: 37.79 hours

Cutting Machinery

2 models listed

Special cutting blade metal saw for plastics-Marto Co., Ltd.

Special cutting blade metal saw for plastics

Marto Co., Ltd.

70+ people viewing

Response time: 37.79 hours

Metal Sawing

2 models listed

Addix for hot melt type high load processing-Marto Co., Ltd.

Addix for hot melt type high load processing

Marto Co., Ltd.

70+ people viewing

Last viewed: 2 hours ago

Response time: 37.79 hours

Glue Guns

2 models listed


View more products of Marto Co., Ltd.

About Company Handling This Product

Marto Co., Ltd.

Response Rate

100.0%

Response Time

37.8hrs

  • Japan

Related search keywords

Test Facilities
Test Facilities　Marto Co., Ltd.
Marto Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree