All Categories

History

IoT/M2M router RX series with LTE multi-carrier compatible module-RX220
IoT/M2M router RX series with LTE multi-carrier compatible module-Sun Electronics Co., Ltd.

IoT/M2M router RX series with LTE multi-carrier compatible module
Sun Electronics Co., Ltd.

Sun Electronics Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

6.9hours

Fast Response


About This Product

■Product overview

As an IoT/M2M router, the RX220 is equipped with an Autonomous Stable Connection (ASC) function that enables stable operation even in unmanned environments. , L2TP server, PPTP server) and is suitable for various IoT/M2M solutions. It is equipped with the LTE multi-carrier communication module "AMM570" manufactured by AM Telecom, and is compatible with NTT Docomo, Softbank, and KDDI (all including MVNO).

■Equipped with IoT/M2M remote management service “SunDMS”

In order to achieve a higher level of safe and stable operation, we provide remote centralized management functions such as firmware updates, logging, temperature and voltage management, and life-or-death monitoring.

■LTE multi-carrier compatible

It is equipped with the LTE multi-carrier communication module "AMM570" manufactured by AM Telecom, and is compatible with NTT Docomo, Softbank, and KDDI (all including MVNO). There is no need to select a device according to the carrier, and you can freely choose the mobile line you want to use.

■Redundant configuration (wired line ⇔ mobile line backup)

Rooster is equipped with 1x LAN port and 1x WAN port, and can be used as a wired router with the WAN port, and at the same time can be connected to a mobile line, so if the wired line is disconnected, backup communication can be performed on the mobile line. can. The reverse is also possible.

■Redundant configuration (VRRP function)

By configuring two Roosters on the same network, if the Rooster (main) becomes unable to communicate, the other Rooster (sub) can continue communication.

■RF interface Radio frequency

・B1 (1,920~1,980MHz (UL), 2,110~2,170MHz (DL)) ・B8 (880~915MHz (UL), 925~960MHz (DL)) ・B18 (815~830MHz (UL), 860~875MHz (DL)) ・B19 (830~845MHz (UL), 875~890MHz (DL))

  • Product

    IoT/M2M router RX series with LTE multi-carrier compatible module

Share this product


90+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of IoT/M2M router RX series with LTE multi-carrier compatible module

Image Part Number Price (excluding tax) Power supply current consumption Power consumption Power input voltage Power ripple Power connector Weight Anti-static air discharge Anti-static contact discharge Noise resistance DC line noise Noise resistance AC line noise Vibration conditions External dimensions Operating humidity Operating temperature Storage humidity Storage temperature Hardware configuration Voltage monitoring Hardware configuration Temperature sensor Hardware configuration Main memory Hardware configuration Flash memory Hardware configuration Push switch Hardware configuration LED Hardware configuration DIP switch Hardware configuration CPU Support protocols Ethernet Interface antenna connector Interface LAN1/WAN/LAN2 port RF interface module RF interface data communication speed RF interface access method
IoT/M2M router RX series with LTE multi-carrier compatible module-Part Number-RX220

RX220

Available upon quote

Standby: Approx. 100mA (DC12V) Communication: Approx. 150mA (DC12V) Maximum communication: Approx. 0.5A (DC12V)

5W (max) /2W (average)

DC5~27.4V (±5%)

100mVp-p or less

JST PAP-02V-S

Approx. 350g (body only)

±10KV (applied to the outer circumference of the LAN/WAN connector) (excluding antenna connector)

±10KV (applied to the outer circumference of the LAN/WAN connector)

±2,000V pulse width 100ns/1,000ns

±2,000V pulse width 100ns/1,000ns

After applying vibrations with an acceleration of 19.6 m/s² (2 g) and a vibration frequency of 30 to 100 Hz (1 sweep time of 20 minutes) vertically/left/right/back and forth to the device itself, it remained functional with no damage to any parts or parts falling off.・No performance problems

Approximately W127 x D81 x H22 Unit mm (excluding protrusions and mounting brackets) Approximately W127 x D88.5 x H22 Unit mm (including connector protrusions, excluding mounting brackets)

25~85% (no condensation)

-20~60℃

25~85% (no condensation)

-20~70℃

DCIN voltage 1 system

2 systems in the case

128MB (DDR2)

NOR Flash: 3 systems ・4MB (for IPL) ・4MB (for log storage) ・16MB (file system)

1 piece

8 pieces

1 4 bit

Main: freescale i.MX287 (400MHz)

CSMA/CD

SMA

100BASE-TX/10BASE-T×2 ports (MDI/MDI-X automatic detection)

AM Telecom “AMM570”

Upstream: Maximum 50Mbps Downstream: Maximum 150Mbps

LTE (NTT Docomo, KDDI, Softbank)

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More M2M Routers Products

Other products of Sun Electronics Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Sun Electronics Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

6.9hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree