All Categories
History
Response Rate
100.0%
Response Time
33.5hours
Relatively Fast Response
Product
Small transfer molding machine ADM series for hand moldHandling Company
MeihoCategories
Click on the part number for more information about each product
| Image | Part Number | Price (excluding tax) | method | Molding power | daylight | Mold stroke | Mold opening and closing speed | Mold size (reference) | Eject method | Rod diameter | Number | Eject stroke | Eject power | Prominent speed | Injection method | control | Applicable plunger diameter | Plunger stroke | Injection capacity | Injection pressure | Injection speed | Transfer number | Temperature -conditioning method | Heater capacity | power supply | Body | weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
ADM-5 (upper transger type) |
Available upon quote |
Electric direct pressure ball screw drive, vertical platen movable |
Up to 4,900kgf (48kN) |
370mm |
190mm |
Up to 150mm/sec |
Height 170mm x width 260mm x depth 260mm |
According to the type opening and closing mechanism |
20mm |
Two places on the lower platen, 130mm pitch |
Up to 10mm |
Approximately 1,000kgf (10kN) |
Up to 100mm/sec |
Vertical direction, electric ball screw drive |
Injecting speed can be set 3 (position switching), injection pressure can be set 2 pressure (position switching) |
12 ~ 16mm * Remodeled |
50mm |
About 9 cm3 when using a 16mm plunger * Calculation as a molding valid stroke 45 |
Up to 28MPa |
Up to 150mm/sec |
One |
Mold mold 2 -point thermoelectric vs. K type |
Total AC200V 2kw for both upper and lower types |
Three -phase AC 200V 50A |
Width 700mm x depth 700mm x height 1,900mm |
Approximately 400kg |
|
|
ADM-5 (lower transger type) |
Available upon quote |
Electric direct pressure ball screw drive, vertical platen movable |
Up to 4,900kgf (48kN) |
370mm |
190mm |
Up to 150mm/sec |
Height 170mm x width 260mm x depth 260mm |
According to the type opening and closing mechanism |
20mm |
Two places on the lower platen, 130mm pitch |
Up to 10mm |
Approximately 1,000kgf (10kN) |
Up to 100mm/sec |
Vertical direction, electric ball screw drive |
Injecting speed can be set 3 (position switching), injection pressure can be set 2 pressure (position switching) |
12 ~ 16mm * Remodeled |
50mm |
About 9 cm3 when using a 16mm plunger * Calculation as a molding valid stroke 45 |
Up to 28MPa |
Up to 150mm/sec |
One |
Mold mold 2 -point thermoelectric vs. K type |
Total AC200V 2kw for both upper and lower types |
Three -phase AC 200V 50A |
Width 700mm x depth 807mm x height 1,450mm |
Approximately 400kg |
Click on the part number for more information about each product
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
33.5hrs
