All Categories

History

Air hand (180° open/close type) HFR series-HFR10
Air hand (180° open/close type) HFR series-Nakajima Koki Co., Ltd.

Air hand (180° open/close type) HFR series
Nakajima Koki Co., Ltd.

Nakajima Koki Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

46.8hours


About This Product

■Installation and use

・Before piping, thoroughly flush the pipes to remove dust, dirt, chips, etc. ・Please use air filtered with a filter of 40um or less for the fluid used. - Take anti-freezing measures in low-temperature environments. - If you remove the air band and do not use it, be careful of surface rust, apply anti-rust oil to the rod and moving parts, and cap the IN and OUT ports of the product.

■Features

- 180° opening/closing type, simplifying pick and place operations. - The finger opening and closing part has a dustproof design that prevents dust and foreign objects from entering, so it can be used even in special environments. ・As there is a localization hole, you can accurately localize. ・All series are equipped with magnets, making them easy to control.

  • Product

    Air hand (180° open/close type) HFR series

Share this product


260+ people viewing

Last viewed: 4 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

5 Models of Air hand (180° open/close type) HFR series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Opening/closing angle Piping connection size Repeatability Refueling Ambient and working fluid temperature Inner diameter (mm) Remarks Holding torque ① Fluid used Maximum frequency used Working pressure range Actuation method Attached sensor switch ② Cushion type
Air hand (180° open/close type) HFR series-Part Number-HFR10

HFR10

Available upon quote

Open: -2°~5°, Closed: 180°±2°

M5×0.8

±0.2mm

Cylinder part: Not required, Grab: Grease

-10~70℃

10

①Values ​​when the working pressure of holding torque is 0.5MPa. ② There is no need to order the sensor switch separately.

0.16N.m

Air (Please use air filtered with a filter of 40μm or more)

60 (c.p.m.)

0.15~0.7Mpa (21~100psi) (1.5~7.0bar)

Double acting

DS1-H

Rubber cushion

Air hand (180° open/close type) HFR series-Part Number-HFR16

HFR16

Available upon quote

Open: -2°~5°, Closed: 180°±2°

M5×0.8

±0.2mm

Cylinder part: Not required, Grab: Grease

-10~70℃

16

①Values ​​when the working pressure of holding torque is 0.5MPa. ② There is no need to order the sensor switch separately.

0.55N.m

Air (Please use air filtered with a filter of 40μm or more)

60 (c.p.m.)

0.15~0.7Mpa (21~100psi) (1.5~7.0bar)

Double acting

DS1-H

Rubber cushion

Air hand (180° open/close type) HFR series-Part Number-HFR20

HFR20

Available upon quote

Open: -2°~5°, Closed: 180°±2°

M5×0.8

±0.2mm

Cylinder part: Not required, Grab: Grease

-10~70℃

20

①Values ​​when the working pressure of holding torque is 0.5MPa. ② There is no need to order the sensor switch separately.

1.10N.m

Air (Please use air filtered with a filter of 40μm or more)

60 (c.p.m.)

0.15~0.7Mpa (21~100psi) (1.5~7.0bar)

Double acting

DS1-H

Rubber cushion

Air hand (180° open/close type) HFR series-Part Number-HFR25

HFR25

Available upon quote

Open: -2°~5°, Closed: 180°±2°

M5×0.8

±0.2mm

Cylinder part: Not required, Grab: Grease

-10~70℃

Twenty five

①Values ​​when the working pressure of holding torque is 0.5MPa. ② There is no need to order the sensor switch separately.

2.30N.m

Air (Please use air filtered with a filter of 40μm or more)

60 (c.p.m.)

0.15~0.7Mpa (21~100psi) (1.5~7.0bar)

Double acting

DS1-H

Rubber cushion

Air hand (180° open/close type) HFR series-Part Number-HFR32

HFR32

Available upon quote

Open: -2°~5°, Closed: 180°±2°

M5×0.8

±0.2mm

Cylinder part: Not required, Grab: Grease

-10~70℃

32

①Values ​​when the working pressure of holding torque is 0.5MPa. ② There is no need to order the sensor switch separately.

5.20N.m

Air (Please use air filtered with a filter of 40μm or more)

60 (c.p.m.)

0.15~0.7Mpa (21~100psi) (1.5~7.0bar)

Double acting

DS1-H

Rubber cushion

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Air Chucks Products

Other products of Nakajima Koki Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nakajima Koki Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

46.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree