All Categories

History

Multi-mount cylinder MKD series-MKD6
Multi-mount cylinder MKD series-Nakajima Koki Co., Ltd.

Multi-mount cylinder MKD series
Nakajima Koki Co., Ltd.

Nakajima Koki Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

46.8hours


About This Product

■Installation and use

・If there is a load, use a cylinder with sufficient thrust. ・Please use a heat-resistant or corrosion-resistant type in environments with high temperatures or where rust or corrosion is a problem. - Take protective measures in dusty locations or locations where water or oil droplets may be present. ・Before installation, perform sufficient flushing to remove dust, dirt, chips, etc. from inside the pipe. ・We recommend air treated with a filter of 40um or less. - The cylinder head cover and piston are short, so choose an appropriate stroke and be careful not to make it too long. - If the temperature is low, take measures to prevent freezing. ・In order to extend the service life of the machine and maintain its normal operation, please do not apply lateral loads. - If the cylinder is removed and not used, cap the IN and OUT ports of the product.

■Features

- Compatible with various installations. - Can be mounted on multiple surfaces, saving space. ・No refueling required. ・Since a fixed block has been added to the piston rod, it will not rotate. - Abundant series. - High temperature resistant specification, operating temperature MAX 150℃.

  • Product

    Multi-mount cylinder MKD series

Share this product


330+ people viewing


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

6 Models of Multi-mount cylinder MKD series

Click on the part number for more information about each product

Image Part Number Price (excluding tax) Piping connection size ① Allowable stroke Standard stroke (mm) Longest stroke Ambient and working fluid temperature Remarks Guaranteed pressure resistance Fluid used Working pressure range Double acting type Piston speed used Actuation method Stroke length tolerance Cylinder inner diameter (mm) Cushion
Multi-mount cylinder MKD series-Part Number-MKD6

MKD6

Available upon quote

M5×0.8

40

5101520253035

35

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

6

Rubber cushion

Multi-mount cylinder MKD series-Part Number-MKD10

MKD10

Available upon quote

M5×0.8

40

5101520253035

35

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

10

Rubber cushion

Multi-mount cylinder MKD series-Part Number-MKD16

MKD16

Available upon quote

M5×0.8

70

510152025304050

50

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

16

Rubber cushion

Multi-mount cylinder MKD series-Part Number-MKD20

MKD20

Available upon quote

M5×0.8

80

5, 10, 15, 20, 25, 30, 40, 50, 60

60

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

20

Rubber cushion

Multi-mount cylinder MKD series-Part Number-MKD25

MKD25

Available upon quote

M5×0.8

80

5, 10, 15, 20, 25, 30, 40, 50, 60

60

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

Twenty five

Rubber cushion

Multi-mount cylinder MKD series-Part Number-MKD32

MKD32

Available upon quote

1/8

80

5, 10, 15, 20, 25, 30, 40, 50, 60

60

-20~80℃

① PT type can also be selected for boat screws.

1.5MPa (215psi) (15bar)

Air (Please use air filtered with a filter of 40μm or more)

0.1~1.0Mpa (15~145psi) (1.0~10.0bar)

Double acting type: 30~500mm/s

Double acting

+1.0
0

32

Rubber cushion

Click on the part number for more information about each product

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Cylinders Products

Other products of Nakajima Koki Co., Ltd.

Reviews shown here are reviews of companies.


View more products of Nakajima Koki Co., Ltd.

About Company Handling This Product

Response Rate

100.0%


Response Time

46.8hrs

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree