All Categories

History

  1. Metoree
  2. Protective Materials & Equipment
  3. Mold Release Agents
  4. Over-emulsification/roller bald prevention device Techno Air Knife System (Techno Roll Co., Ltd.)
Over-emulsification/roller bald prevention device Techno Air Knife System-Techno air knife system
Over-emulsification/roller bald prevention device Techno Air Knife System-Techno Roll Co., Ltd.

Over-emulsification/roller bald prevention device Techno Air Knife System
Techno Roll Co., Ltd.

Techno Roll Co., Ltd.'s Response Status

Response Rate

100.0%

Response Time

23.6hours

Relatively Fast Response

About This Product

■Features of the Techno Air Knife System

- Efficiently blows dry air to the ink roll and blanket parts. - Dry air prevents printing stains and roller baldness due to overemulsification. ・Dry air stabilizes the water circulation, eliminating the need for fine adjustments to the water. ・Dry air makes UV printing easier.

■Effects of Techno Air Knife System

Excessive water content inside the ink can cause many defects such as background stains and sudden emulsion stains. Until now, in order to prevent overemulsification, it was necessary to squeeze the water on the plate to the limit, but once the water on the plate was squeezed to the limit, it became necessary to keep an eye on the printed material at all times to prevent staining accidents due to lack of water. follows. The Techno Air Knife System solves these problems easily and easily. ・There is no need to squeeze the water to the limit and there is no need to worry about stains on printed matter. ・Since the ink will not become over-emulsified, sudden scumming will be eliminated. ・Available for sharp printing. - No more stains on the blanket. ・The paper (board) can be separated from the blanket better. ・The water width of UV ink is larger than that of oil-based ink, making water adjustment much easier.

■Breakdown of the air knife system

・1 dry air generator (1 dry screw compressor, 1 refrigeration dryer) ・Installation of mechanical interlocking solenoid valve ・Flow rate adjustable nozzles: 1 blanket part, 2 ink roll parts (drain, 1 oil removal filter, 2 air pressure regulators), installation work *() indicates compressor specifications

  • Product

    Over-emulsification/roller bald prevention device Techno Air Knife System

Share this product


30+ people viewing

Last viewed: 7 hours ago

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Over-emulsification/roller bald prevention device Techno Air Knife System

Image Part Number Price (excluding tax)
Over-emulsification/roller bald prevention device Techno Air Knife System-Part Number-Techno air knife system

Techno air knife system

Available upon quote

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

High-performance oil-based concrete mold release agent for construction use Resicon Super Series-Shin-Etsu Industry Co., Ltd.

High-performance oil-based concrete mold release agent for construction use Resicon Super Series

Shin-Etsu Industry Co., Ltd.

270+ people viewing

Last viewed: 4 hours ago

Response time: 7.93 hours

Mold Release Agents

5 models listed

Ideal for lubrication and release agents in high temperature range, heat -resistant lubrication/release agent nitrogen-Edec Co., Ltd.

Ideal for lubrication and release agents in high temperature range, heat -resistant lubrication/release agent nitrogen

Edec Co., Ltd.

360+ people viewing

Last viewed: 8 hours ago

Response time: 26.45 hours

Mold Release Agents

8 models listed

Environmentally friendly water-soluble mold release agent for vibration compaction (straight type) Recon Aqua ECO series-Shin-Etsu Industry Co., Ltd.

Environmentally friendly water-soluble mold release agent for vibration compaction (straight type) Recon Aqua ECO series

Shin-Etsu Industry Co., Ltd.

170+ people viewing

Last viewed: 23 hours ago

Response time: 7.93 hours

Mold Release Agents

3 models listed

Label remover #55-Kokusai Kagaku Kogyo Co., Ltd.

Label remover #55

Kokusai Kagaku Kogyo Co., Ltd.

50+ people viewing

Last viewed: 7 hours ago

Response time: 8.92 hours

Mold Release Agents

3 models listed

Mold release agent Fluorosurf®-Fluoro Technology Co.,LTD.

Mold release agent Fluorosurf®

Fluoro Technology Co.,LTD.

480+ people viewing

Last viewed: 16 hours ago

Response time: 17.61 hours

Mold Release Agents

9 models listed

Effective for continuous use at high temperature, heat -resistant lubrication/release type nitride product/inorganic (water -based) product-Edec Co., Ltd.

Effective for continuous use at high temperature, heat -resistant lubrication/release type nitride product/inorganic (water -based) product

Edec Co., Ltd.

340+ people viewing

Last viewed: 12 hours ago

Response time: 26.45 hours

Mold Release Agents

7 models listed

TOMAX Non-silicone mold release coating agent-Nippon Kako Paint Co., Ltd.

TOMAX Non-silicone mold release coating agent

Nippon Kako Paint Co., Ltd.

170+ people viewing

Last viewed: 6 hours ago

Response time: 27.69 hours

Mold Release Agents

9 models listed

Grease & body shampoo-Kokusai Kagaku Kogyo Co., Ltd.

Grease & body shampoo

Kokusai Kagaku Kogyo Co., Ltd.

50+ people viewing

Last viewed: 8 hours ago

Response time: 8.92 hours

Mold Release Agents

3 models listed

Oil-based mold release agent for center formwork Resicon TN series-Shin-Etsu Industry Co., Ltd.

Oil-based mold release agent for center formwork Resicon TN series

Shin-Etsu Industry Co., Ltd.

240+ people viewing

Last viewed: 6 hours ago

Response time: 7.93 hours

Mold Release Agents

6 models listed

Black thin lubricating skin film -heat -resistant / release type material graphite (graphite) product-Edec Co., Ltd.

Black thin lubricating skin film -heat -resistant / release type material graphite (graphite) product

Edec Co., Ltd.

310+ people viewing

Last viewed: 12 hours ago

Response time: 26.45 hours

Mold Release Agents

2 models listed

Mold release agent Metaform vegetable oil-based (for secondary processing) 101-Composite Materials Co., Ltd.

Mold release agent Metaform vegetable oil-based (for secondary processing) 101

Composite Materials Co., Ltd.

40+ people viewing

Last viewed: 21 hours ago

Mold Release Agents
Excellent lubrication & separation silver film -resistant lubricating / release type aluminum Fine powder product-Edec Co., Ltd.

Excellent lubrication & separation silver film -resistant lubricating / release type aluminum Fine powder product

Edec Co., Ltd.

230+ people viewing

Last viewed: 12 hours ago

Response time: 26.45 hours

Mold Release Agents
See More Mold Release Agents Products

Other products of Techno Roll Co., Ltd.

Reviews shown here are reviews of companies.

Printing Rubber Roller Ink Roller UV Dual Use Trust Zeta (Z)-Techno Roll Co., Ltd.

Printing Rubber Roller Ink Roller UV Dual Use Trust Zeta (Z)

Techno Roll Co., Ltd.

60+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Printing Rubber Roller Ink Roller UV Dual Use Trust Pro (PRO)-Techno Roll Co., Ltd.

Printing Rubber Roller Ink Roller UV Dual Use Trust Pro (PRO)

Techno Roll Co., Ltd.

50+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Coaters

3 models listed

Rubber roller for printing Ink roller Waterless UV combination Trust Double L (WL)-Techno Roll Co., Ltd.

Rubber roller for printing Ink roller Waterless UV combination Trust Double L (WL)

Techno Roll Co., Ltd.

30+ people viewing

Last viewed: 10 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Rubber rollers for printing Inking rollers for off-wheel and newspaper rotary presses Velospeed-Techno Roll Co., Ltd.

Rubber rollers for printing Inking rollers for off-wheel and newspaper rotary presses Velospeed

Techno Roll Co., Ltd.

30+ people viewing

Last viewed: 10 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Rubber roller for printing, Inking roller for offset printing, Velograph for oil-based printing-Techno Roll Co., Ltd.

Rubber roller for printing, Inking roller for offset printing, Velograph for oil-based printing

Techno Roll Co., Ltd.

30+ people viewing

Response time: 23.57 hours

Coaters

3 models listed

Rubber roller for printing Super inking roller for offset printing Rhino roller for oil-based printing-Techno Roll Co., Ltd.

Rubber roller for printing Super inking roller for offset printing Rhino roller for oil-based printing

Techno Roll Co., Ltd.

50+ people viewing

Last viewed: 1 hour ago

Response time: 23.57 hours

Coaters

4 models listed

Rubber roller for printing Special specification Continuous water supply roller for offset printing Combined with UV Trust Lambda (λ)-Techno Roll Co., Ltd.

Rubber roller for printing Special specification Continuous water supply roller for offset printing Combined with UV Trust Lambda (λ)

Techno Roll Co., Ltd.

40+ people viewing

Response time: 23.57 hours

Coaters

4 models listed

Rubber roller for printing Continuous water supply roller for UV oil printing Veromix-Techno Roll Co., Ltd.

Rubber roller for printing Continuous water supply roller for UV oil printing Veromix

Techno Roll Co., Ltd.

30+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Rubber roller for printing Non-alcohol continuous water supply roller for oil-based VeroAqua-Techno Roll Co., Ltd.

Rubber roller for printing Non-alcohol continuous water supply roller for oil-based VeroAqua

Techno Roll Co., Ltd.

40+ people viewing

Last viewed: 7 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Rubber roller for printing Continuous water supply roller for offset printing Rhino Hydrometric series Rhino Red Hydrometric (red)-Techno Roll Co., Ltd.

Rubber roller for printing Continuous water supply roller for offset printing Rhino Hydrometric series Rhino Red Hydrometric (red)

Techno Roll Co., Ltd.

50+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Coaters

4 models listed

Water supply roller hydrophilic treatment liquid Essential for alcohol-free printing Super Rinse Stamper-Techno Roll Co., Ltd.

Water supply roller hydrophilic treatment liquid Essential for alcohol-free printing Super Rinse Stamper

Techno Roll Co., Ltd.

70+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Electropolishing Chemicals

3 models listed

Dedicated cleaning agent for adhesive rubber roller “Clean Dash” Klintor A-Techno Roll Co., Ltd.

Dedicated cleaning agent for adhesive rubber roller “Clean Dash” Klintor A

Techno Roll Co., Ltd.

60+ people viewing

Last viewed: 6 hours ago

Response time: 23.57 hours

Degreasing Cleaners

3 models listed


View more products of Techno Roll Co., Ltd.

About Company Handling This Product

Techno Roll Co., Ltd.

Response Rate

100.0%

Response Time

23.6hrs

  • Japan

Related search keywords

Mold Release Agents
Mold Release Agents　Techno Roll Co., Ltd.
Techno Roll Co., Ltd.

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree