All Categories
History
Response Rate
100.0%
Response Time
47.0hours
Product
Turning technique Conventional general-purpose NC rotary table MDHHandling Company
Matsumoto Machine Industry Co., Ltd.Categories
| Image | Part Number | Price (excluding tax) | Allowable loading work mass (vertical) (kg) | Allowable loading work mass (horizontal) (kg) | Allowable cutting torque (wheel strength) (N・m) | Allowable work inertia (kg・m²) | Product mass (kg) | Reduction ratio | Maximum rotation speed (min⁻¹) | Minimum setting unit (degrees) | Allowable load in rotational direction (when clamped) (N・m) | Indexing accuracy (seconds) | Reproducibility (seconds) | Motor used (FANUC) | Horizontal table height (mm) | Allowable moment load (when clamped) (N・m) | Motor rotation speed (min⁻¹) | Table through hole diameter (mm) | Table diameter (mm) | Table T groove width (mm) | Vertical center height (mm) | Thrust allowable load (when clamped) (N) | Clamp pressure (MPa) | Clamp torque (N・m) | Guide block width (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
MDH233R-65 |
Available upon quote |
100 |
200 |
735 |
1.9 |
110 |
1/60 |
33.3 |
0.001 |
284 |
12 (6) |
±2 (2) |
Α is8/4,000 |
200 |
1,150 |
2,000 |
Φ60 |
Φ230 |
12H8 |
185 |
27,000 |
4.9 |
284 |
18h7 |
Reviews shown here are reviews of companies.
Reviews shown here are reviews of companies.
Response Rate
100.0%
Response Time
47.0hrs
