All Categories

History

  1. Metoree
  2. Conveyors
  3. Grippers
  4. Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN (CKD)
Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN-RLSH-FN
Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN-CKD

Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN
CKD

About This Product

■Summary

A compact type that does not interfere with the robot's trajectory. The FANUCRobotCRX series compatible gripper is a pneumatic gripper compatible with FANUC Corporation's collaborative robots. Easy installation using a dedicated common flange and tool-less replacement using a clamp ring. Teaching time is also significantly reduced using the dedicated software "PneumaticGripper." Equipped with an edgeless resin cover and an LED indicator lamp that can be viewed 360°, it is highly safe and will support the introduction of collaborative robots by all customers.

■Software installation

Download the Plug&Play software package exclusively for the FANUCRobotCRX series from the CKD homepage, and install the file according to the instructions in the instruction manual. At that time, you will need to enter the password for unzipping the software, which is written on the last page of the instruction manual you purchased. Note: The instruction manual on the CKD homepage does not include the password for unzipping the software.

■Can be installed on the robot in just 2 minutes

・Attach a special flange to the robot. ・Turn the clamp ring and install the gripper. ・Wiring connector connection. The installation is now complete.

■Gripper can be replaced without tools

By using a robot flange common to all series, setup changes can be completed by simply replacing the gripper. The gripper can be replaced without tools, and is designed to be as simple as turning the clamp ring by hand.

■Teaching time reduced to 1/10

Compatible with FANUC Robot CRX series. The plug-in software "CKDPneumaticGripper" allows you to significantly reduce teaching time with simple setting procedures and intuitive operation.

■High safety that supports collaborative work

Achieves high safety with edgeless resin cover and 360° visible indicator lamp.

■Total support for air systems

Optional directional control valve set. CKD also has a wide lineup of other air equipment required to drive the gripper.

  • Product

    Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN

Share this product


190+ people viewing

Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN

Image Part Number Price (excluding tax) Mass Gripping force Stroke
Hand chuck FANUC Robot CRX series compatible gripper compact type RLSH-FN-Part Number-RLSH-FN

RLSH-FN

Available upon quote

0.8kg

42N

18mm

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide-Sunk Japan Co., Ltd.

General-purpose 2-nail flat lines with high payloads using a large joe stroke, integrated sensor system, and Selation Guide

Sunk Japan Co., Ltd.

820+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability-Sunk Japan Co., Ltd.

Highly versatile 2 -nail gripper EGK that realizes work diversity with maximum process reliability

Sunk Japan Co., Ltd.

810+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

High performance electric gripper GR1 series-PSi Corporation

High performance electric gripper GR1 series

PSi Corporation

430+ people viewing

Last viewed: 26 minutes ago

Response time: 73.96 hours

Grippers

4 models listed

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity-Sunk Japan Co., Ltd.

Highly versatile two -claw general gripper EGU that realizes the diversity of work with maximum process robustity

Sunk Japan Co., Ltd.

690+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

Clip-only type for textiles-Taihei Koki Co., Ltd.

Clip-only type for textiles

Taihei Koki Co., Ltd.

140+ people viewing

Last viewed: 26 minutes ago

Grippers

2 models listed

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide-Sunk Japan Co., Ltd.

Electric type 2 finger parallel gripper ELG with a long joe stroke, long finger use with a profile processed rail guide

Sunk Japan Co., Ltd.

1140+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

40 models listed

For textiles, pin/clip type-Taihei Koki Co., Ltd.

For textiles, pin/clip type

Taihei Koki Co., Ltd.

120+ people viewing

Last viewed: 26 minutes ago

Grippers

2 models listed

[For palletizing] Collaborative robot electric gripper “2FGP20” / OnRobot-Daiki Sangyo Co., Ltd.

[For palletizing] Collaborative robot electric gripper “2FGP20” / OnRobot

Daiki Sangyo Co., Ltd.

5.0

250+ people viewing

Last viewed: 26 minutes ago

Response time: 12.44 hours

Grippers

3 models listed

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG-Sunk Japan Co., Ltd.

A large joe stroke, a profed rail guide to use a long finger, the air pressure type 2 finger parallel pLG PLG

Sunk Japan Co., Ltd.

810+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

40 models listed

Horizontal pin chain for textiles-Taihei Koki Co., Ltd.

Horizontal pin chain for textiles

Taihei Koki Co., Ltd.

130+ people viewing

Last viewed: 26 minutes ago

Grippers

2 models listed

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P-Sunk Japan Co., Ltd.

General-purpose 2-nail flat opening and closing with a T slot guide JGP-P

Sunk Japan Co., Ltd.

1470+ people viewing

Last viewed: 26 minutes ago

Response time: 11.74 hours

Grippers

10 models listed

Vertical pin chain for textiles-Taihei Koki Co., Ltd.

Vertical pin chain for textiles

Taihei Koki Co., Ltd.

110+ people viewing

Last viewed: 26 minutes ago

Grippers

2 models listed

See More Grippers Products

Other products of CKD

Reviews shown here are reviews of companies.

Air booster (air pressure booster)-CKD

Air booster (air pressure booster)

CKD

190+ people viewing

Last viewed: 3 hours ago

Response time: 22.32 hours

Booster Valves (Air Boosters)
Vacuum filter VFA1000/3000/4000 series-CKD

Vacuum filter VFA1000/3000/4000 series

CKD

150+ people viewing

Last viewed: 15 hours ago

Response time: 22.32 hours

Vacuum Filters
Stopper cylinder STK series-CKD

Stopper cylinder STK series

CKD

140+ people viewing

Response time: 22.32 hours

Stopper Cylinders

3 models listed

Mechanical 2/3/4 port valve Mechanical valve MS/MM/MAVL-CKD

Mechanical 2/3/4 port valve Mechanical valve MS/MM/MAVL

CKD

150+ people viewing

Last viewed: 11 hours ago

Response time: 22.32 hours

Mechanical Valves

2 models listed

Lubricator L1000/L3000/L4000/L8000-W series (standard white)-CKD

Lubricator L1000/L3000/L4000/L8000-W series (standard white)

CKD

220+ people viewing

Response time: 22.32 hours

Lubricators
Product FP series for food manufacturing process Super rodless cylinder SRL3-FP1-CKD

Product FP series for food manufacturing process Super rodless cylinder SRL3-FP1

CKD

120+ people viewing

Response time: 22.32 hours

Rodless Cylinders
Electronic pressure switch with digital display PPG series-CKD

Electronic pressure switch with digital display PPG series

CKD

190+ people viewing

Last viewed: 2 hours ago

Response time: 22.32 hours

Digital Indicators

2 models listed

Motorless electric actuator slider type EBS-L-CKD

Motorless electric actuator slider type EBS-L

CKD

160+ people viewing

Last viewed: 6 hours ago

Response time: 22.32 hours

Servo Actuators
Check valve/Shuttle valve/Rapid exhaust valve Shuttle valve SHV2-CKD

Check valve/Shuttle valve/Rapid exhaust valve Shuttle valve SHV2

CKD

170+ people viewing

Response time: 22.32 hours

Quick Exhaust Valves

4 models listed

Combination-CKD

Combination

CKD

90+ people viewing

Response time: 22.32 hours

Electric actuator Horizontal articulated robot KHL-CKD

Electric actuator Horizontal articulated robot KHL

CKD

200+ people viewing

Response time: 22.32 hours

SCARA Robots

4 models listed

Hand chuck Thin long stroke hand with length measurement function LSTM-HP2-CKD

Hand chuck Thin long stroke hand with length measurement function LSTM-HP2

CKD

130+ people viewing

Response time: 22.32 hours

Parallel Chucks

View more products of CKD

About Company Handling This Product

CKD

Company Overview

CKD Corporation, established in 1943 under the name of Japan Aircraft Electric Co., Ltd., is a Japanese manufa...

See More

  • Japan

Related search keywords

Grippers
Grippers　CKD
CKD

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2025 Metoree