Torque motor TM series
Oriental Motor Co., Ltd.
About This Product
■Summary
Torque motors have a large starting torque, high torque at low speeds, and low torque at high speeds (droop characteristics). Taking advantage of this characteristic, it can be used in a wide range of applications as motors for winding and tensioning.
・Ideal as a motor for winding, tension adjustment, and pressing together
・Easy adjustment of motor torque when combined with a power controller
・Output 3~20W
■Easy adjustment of motor torque
The TM series allows you to easily set and adjust the motor torque using the power controller's internal torque setting device.
■Simple system configuration
If high-precision control using a tension controller or servo motor is not required, tension adjustment can be achieved with a simple system configuration by using the TM series.
■Affordable price for starting simple winding and tension adjustment
You can configure a winding/tension adjustment system at a lower cost than a tension controller or servo motor.
■Three types of torque setting methods to suit your system
Torque can be set from the "internal torque setting device," "external torque setting device," and "external DC voltage." In the case of external DC voltage, it can be connected to a host PLC and controlled using DC voltage, contributing to automation. Two-step torque setting is also possible by switching between internal and external.
■Equipped with torque fine adjustment function
The actual motor output torque relative to the set value will vary slightly from motor to motor. The TM series power controller is equipped with a torque fine adjustment setting device (ADJUST function) to adjust this variation. When using multiple motors, such as during parallel operation, you can easily compensate for the torque difference between each motor.
■Complete functions
・Alarm output function to detect motor connection failure (thermal protector open detection)
・Two-step torque setting internally/externally
・Instant forward/reverse operation by switching between CW/CCW
・Sink/source logic switching of signal input
-
Product
Torque motor TM series
-
Handling Company
Oriental Motor Co., Ltd.
-
Categories
1 Models of Torque motor TM series
| Product Image | Part Number | Price (excluding tax) | Capacitor | Circuit part mass | Maximum output (continuous use rating) | Maximum output (use rating 5 minutes) | Motor part mass | Mounting angle dimensions | Overheat protection device type | Shaft/gear type | Starting torque (motor shaft, continuous use rating) | Starting torque (motor shaft, use rating 5 minutes) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
2TK3A-AW2J+TMP-1 |
Available upon quote | Product Name: CH70CFAUL2, Capacity: 7 µF, Rated Voltage: 250 VAC | 0.18 kg |
Single phase 100 V / 50Hz: 0.8 W (torque setting voltage DC2.5 V*) Single phase 100 V / 60Hz: 1 W (torque setting voltage DC1.8 V*) |
Single phase 100 V / 50 Hz: 2.8 W (torque setting voltage DC5.0 V*) Single phase 100 V / 60 Hz: 3.5 W (torque setting voltage DC5.0 V*) |
0.7kg | 60mm | Thermal protector | Round shaft |
Single-phase 100 V / 50 Hz: 18 mN m (torque setting voltage DC2.5 V*) Single-phase 100 V / 60 Hz: 20 mN m (torque setting voltage DC1.8 V*) |
Single-phase 100 V / 50 Hz: 70 mN m (torque setting voltage DC5.0 V*) Single-phase 100 V / 60 Hz: 70 mN m (torque setting voltage DC5.0 V*) |
Customers who viewed this product also viewed
Other products of Oriental Motor Co., Ltd.
View more products of Oriental Motor Co., Ltd.
About Company Handling This Product
- Japan