Cone plate viscometer NuLine
Viscotec Co., Ltd.
About This Product
■Product overview
・NuLine cone/plate viscometer is a viscometer with built-in calibration function.
・This is a high-performance viscometer that allows display selection of viscosity display units (Po, Pa.s), temperature display units (℃, °F), rotation speed (rpm, shear rate sec-1), etc.
・In addition, software for data storage and graph output is available separately by connecting to a PC.
・Reading displays viscosity values (Po, Pa.s) at multiple rotational speeds or shear rates.
・The set temperature can be set in the range of 10℃ to 100℃ (Peltier type) or 25 to 230℃ (electric heating type).
・Viscosity measurement can be performed by selecting measurement shear rate (sec-1) or rotation speed (rpm).
・The sample plate is made of hard tungsten carbide and has excellent wear resistance.
- Designed to be robust and easy to clean, this viscometer combines both reliability and performance.
・Application examples: Paints, varnishes, inks, resins, foods, bitumen, oils, adhesives, etc.
・NμLine Cone & Plate Viscometer is used by many companies for viscosity control in the quality control process of the pharmaceutical industry.
・Product manufacturing is managed and after-sales service is provided through distributors in each country.
■Features
・11 speed settings 5.86 to 900 rpm.
・Refer to the data table below for the maximum measured viscosity value at each shear rate and rotation speed.
・Model REL0100: Peltier control type 10℃ ~ 100℃
・Device specifications: Plate temperature (℃・°F) ・Viscosity value (Po, Pa.s) Same as software
・PC software: Saves the displayed viscosity, temperature, shear rate, and rotation speed
・The viscometer is calibrated at the factory before being shipped.
・Select one cone and it will be shipped calibrated and ready for use.
・Measurement can be performed with a sample amount of just 1ml.
・This product complies with British Industrial Standards BS EN ISO2884-1: 2006.
・Flat plate sample stand with excellent robustness.
・Selectable by setting measurement conditions of rotation speed or shear rate
This is a highly robust viscometer that is easy to operate and allows you to easily measure viscosity by selecting the spindle, measurement temperature, and rotation speed. Measurement conditions can be stored in memory, making it ideal for quality control process control. Measurements can be made with a small amount of sample, and it is easy to clean. It can be measured in a short time and is ideal for quality control.
-
Product
Cone plate viscometer NuLine
-
Handling Company
Viscotec Co., Ltd.
-
Categories
1 Models of Cone plate viscometer NuLine
| Product Image | Part Number | Price (excluding tax) | Cone type | Digital display | Features | Measurement accuracy | PC interface | Power supply | Preheating time | Selectable unit | Standard rotation speed (rpm) | Temperature range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
REL0100 |
Available upon quote | 2P, 5P, 10P, 20P, 40P, 100P | Plate temperature, viscosity measurement range, measured viscosity value (poise) | Zero point calibration function using piezo sensor | ±2% when calibrated using standard solution for viscosity calibration | USB, instrument range set"ng and control, with graph plot"ng and save. | 100‐240VAC 50/60 Hz single phase 150W. | Approximately 10 minutes from low temperature | Temperature: °C or °F, Speed: Rotational speed rpm or shear rate sec-1, Viscosity: Poise or Pa.s. | 5.86, 11.7, 23.4, 46.9, 60, 93.7, 120, 187.5, 375, 750, 900 | Peltier type: 10℃ ~ 100℃ or electric heating type: 25℃ ~ 230℃ (resolution 0.1℃) |
Customers who viewed this product also viewed
Other products of Viscotec Co., Ltd.
View more products of Viscotec Co., Ltd.
About Company Handling This Product
- Japan