Wireless temperature logger slave unit SK-L700R-T (indicator only)
Sato Keiryoki Mfg. Co., Ltd
About This Product
The wireless logger "SK-L700R series" is a data logger that allows network communication with up to 60 devices. Using wireless technology, you can configure remotely located equipment, collect data, and monitor measurements in real time without the need for wiring.
■Features
- Control repeaters and slave units from the base unit connected to the computer.
- There are two types of slave units: temperature type and temperature/humidity type. Please select the sensor dedicated to each slave device depending on the application.
・If you install a repeater when the wireless communication between the base unit and slave unit cannot be reached due to obstacles, etc., it will improve communication distance and communication conditions.
・Memorize the measured data in the slave unit (temperature type/temperature/humidity type) using the logger function.
- By using analysis software, it is possible to configure the slave unit, monitor measurement data, and collect measurement data stored in the slave unit from a remote location.
・Data collected using analysis software can be analyzed in various ways depending on the purpose.
-Traceability calibration and JCSS calibration are possible with the handset and dedicated sensor.
Product overview
■Wireless range
Approximately 400m in a straight line with good visibility without obstructions. (approximately 100m if indoors)
■Network communication for up to 60 devices
Up to 60 devices including repeaters and child devices can be connected simultaneously to one parent device. Covers a wide range of measurement locations, such as inside facilities and factories.
■Data logger function
The slave unit (temperature type/temperature/humidity type) uses the logger function to store measurement data in the main unit.
■Real-time monitoring
It is possible to monitor the measurement data of the slave unit in real time from a remote location using wireless communication.
■Analysis software
Using the analysis software, you can configure the slave unit, monitor measurement data, collect measurement data stored in the slave unit, and analyze data.
-
Product
Wireless temperature logger slave unit SK-L700R-T (indicator only)
-
Handling Company
Sato Keiryoki Mfg. Co., Ltd
-
Categories
1 Models of Wireless temperature logger slave unit SK-L700R-T (indicator only)
| Product Image | Part Number | Price (excluding tax) | Accessories | Battery life | Communication distance | Display accuracy | Display function | Display sampling | Dustproof/waterproof | External memory | JAN code | Mass | Measuring range | Memory interval | Number of measurement channels | Option | Power supply | Resolution | Size | Storage capacity | Usage environment | Wireless standards |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
SK-L700R-T |
Available upon quote | AA alkaline batteries: 2, instruction manual: 1 | Approximately 10 months *When LCD OFF setting, memory interval 10 minutes, and good wireless communication environment | Outdoor visibility approx. 400m/indoor visibility approx. 100m *Communication distance varies depending on usage environment | At 0~40℃: ± (0.1+1digit) ℃, other than above: ± (0.2+1digit) ℃ | Temperature alarm, storage method, display during storage, amount of storage, reception strength, microSD memory, low battery mark, error messages, setting value display for each setting | 1 second | JIS C 0920 IP65 compliant (when AC adapter is not connected (when using batteries), when both CH1 and CH2 are connected to sensors (or when sensor cap is attached)) | MicroSD/SDHC up to 32GB | 4974425801114 | Approx. 245g (including battery) | The measurement range varies depending on the sensor connected. | 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes. | Temperature 2 channels | Dedicated AC adapter | 2 AA alkaline batteries or AC adapter | 0.1℃ | Approximately (W) 114× (H) 80× (D) 35mm *Excluding antenna and protrusion | 16,000 data for each channel | -10~60℃, 85% rh or less (no condensation) | Compliant with ARIB STD-T108 (920MHz band/Number of communication channels: 14ch/Output approx. 20mW) |
Customers who viewed this product also viewed
Other products of Sato Keiryoki Mfg. Co., Ltd
View more products of Sato Keiryoki Mfg. Co., Ltd
