All Categories

History

Wireless logger main unit/repeater SK-L700R-SK-L700R
Wireless logger main unit/repeater SK-L700R-Sato Keiryoki Mfg. Co., Ltd

Wireless logger main unit/repeater SK-L700R
Sato Keiryoki Mfg. Co., Ltd

Sato Keiryoki Mfg. Co., Ltd's Response Status

Response Rate

100.0%

Response Time

14.2hours

Relatively Fast Response


About This Product

The wireless logger "SK-L700R series" is a data logger that allows network communication with up to 60 devices. Using wireless technology, you can configure remotely located equipment, collect data, and monitor measurements in real time without the need for wiring.

■Features

- Control repeaters and slave units from the base unit connected to the computer. - There are two types of slave units: temperature type and temperature/humidity type. Please select the sensor dedicated to each slave device depending on the application. ・If you install a repeater when the wireless communication between the base unit and slave unit cannot be reached due to obstacles, etc., it will improve communication distance and communication conditions. ・Memorize the measured data in the slave unit (temperature type/temperature/humidity type) using the logger function. - By using analysis software, it is possible to configure the slave unit, monitor measurement data, and collect measurement data stored in the slave unit from a remote location. ・Data collected using analysis software can be analyzed in various ways depending on the purpose. -Traceability calibration and JCSS calibration are possible with the handset and dedicated sensor. Product overview

■Wireless range

Approximately 400m in a straight line with good visibility without obstructions. (Approximately 100m indoors) If the wireless signal cannot reach you due to obstacles, you can improve the communication distance and condition by installing a repeater. *Wireless range varies depending on the wireless environment.

■Network communication for up to 60 devices

- Up to 60 repeaters and slave units can be connected simultaneously to one base unit. Covers a wide range of measurement locations, such as inside facilities and factories. *To control repeaters and slave units, a computer with analysis software installed and a master unit are required. ・The minimum network is a computer, one base unit, and one slave unit. The repeater can also be used as the base unit, but if you are using a repeater, it must be installed separately from the base unit. *Up to 3 stages can be connected using repeaters.

■Data logger function

The slave unit (temperature type/temperature/humidity type) uses the logger function to store measurement data in the main unit.

■Real-time monitoring

It is possible to monitor the measurement data of the slave unit in real time from a remote location using wireless communication.

■Analysis software

Using the analysis software, you can configure the slave unit, monitor measurement data, collect measurement data stored in the slave unit, and analyze data.

  • Product

    Wireless logger main unit/repeater SK-L700R

Share this product


40+ people viewing

Last viewed: 17 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of Wireless logger main unit/repeater SK-L700R

Image Part Number Price (excluding tax) Power supply Battery life Communication distance Communication Mass Display Wireless standards Contact capacity Size Usage environment Option Accessories JAN code
Wireless logger main unit/repeater SK-L700R-Part Number-SK-L700R

SK-L700R

Available upon quote

USB bus power or 2 AA alkaline batteries, dedicated AC adapter (optional)

Approximately 6 months in repeater mode *When one slave unit is connected to the repeater and the real-time interval is 10 minutes

Outdoor visibility approx. 400m/indoor visibility approx. 100m *Communication distance varies depending on usage environment

USB

Approx. 230g (including battery)

LED

Compliant with ARIB STD-T108 (920MHz band/Number of communication channels: 14ch/Output approx. 20mW)

Voltage-free contacts: 2 contacts, maximum rating: AC/DC240V 80mA *When used as a base unit

Approximately (W) 114× (H) 80× (D) 35mm *Excluding antenna and protrusion

0~50℃, 85% rh or less (no condensation)

Dedicated AC adapter

AA alkaline batteries: 2, Communication cable (1.5m): 1, Quick manual: 1 copy, Instruction manual: 1 book

4974425801107

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Data Loggers Products

Other products of Sato Keiryoki Mfg. Co., Ltd

Reviews shown here are reviews of companies.


View more products of Sato Keiryoki Mfg. Co., Ltd

About Company Handling This Product

Response Rate

100.0%


Response Time

14.2hrs

Company Overview

Sato Keiryoki Mfg. Co., Ltd., established in 1951 and headquartered in Tokyo, Japan, is a manufacturer of temp...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree