All Categories

History

4ch temperature logger SK-L400T (indicator only)-SK-L400T (indicator only)
4ch temperature logger SK-L400T (indicator only)-Sato Keiryoki Mfg. Co., Ltd

4ch temperature logger SK-L400T (indicator only)
Sato Keiryoki Mfg. Co., Ltd

Sato Keiryoki Mfg. Co., Ltd's Response Status

Response Rate

100.0%

Response Time

14.2hours

Relatively Fast Response


About This Product

Features

■Simultaneous measurement of temperature in 4 locations

Up to 4 K thermocouple sensors can be connected. The large, easy-to-read LCD display displays the temperature of four locations at the same time. It uses an ASTM miniature connector for K thermocouples, allowing various optional sensors to be connected.

■Easy-to-read display

The measured data is displayed on a large LCD screen. Equipped with a backlight function for convenient reading in dark places.

■Record measurement values ​​on SD card

Measured values ​​can be recorded on the SD card installed in the main unit. Using the analysis software "4ch Temperature Logger for Windows", you can easily display graphs and analyze data.

■Temperature upper and lower limit alarm function

It is possible to set independent upper and lower limit alarms for each of the 4 channels. When the measured value exceeds the alarm set value, a buzzer sounds and the LED lamp flashes to notify you.

■Various calculation display functions

Equipped with maximum value (MAX) / minimum value (MIN) display, relative value display (REL function), temperature difference display (T1-T2 function), and offset function.

■Recording interval can be set

You can select from 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, and 90 minutes.

■Manual recording, reservation recording, memo function

Equipped with manual recording, scheduled recording that allows you to set recording start/stop times, and a memo function that allows you to immediately record current measured values. It can be used for data collection in various situations.

■AC adapter available as an option

An optional AC adapter is also available for long-term recording. *For long-term recording, please use the AC adapter.

■Can be attached to a tripod

Equipped with a screw hole for mounting a tripod on the back of the main unit. Convenient for installation. explanation

■SK-L400T software

Analysis software exclusively for the 4-channel temperature logger SK-L400T.

■Features of analysis software

- Recorded data can be read from the SD card and displayed in graphs. - Automatically calculates the highest value, lowest value, and average value for each channel. ・Since the cumulative temperature is calculated, it is ideal for analyzing cumulative temperature values. - By setting markers, you can easily analyze points that exceed a specific temperature value or are within a specific temperature range. - If data is saved in CSV format, data can be analyzed using commercially available spreadsheet software.

  • Product

    4ch temperature logger SK-L400T (indicator only)

Share this product


50+ people viewing

Last viewed: 3 hours ago


Free
Get started with our free quotation service - no cost, no obligation.

No Phone Required
We respect your privacy. You can receive quotes without sharing your phone number.

1 Models of 4ch temperature logger SK-L400T (indicator only)

Image Part Number Price (excluding tax) Power supply Battery life Mass Allowable signal source resistance Recording interval Display range Measurement sampling Temperature coefficient Material Connection sensor Indicator accuracy Size Resolution Channel Accessories JAN code
4ch temperature logger SK-L400T (indicator only)-Part Number-SK-L400T (indicator only)

SK-L400T (indicator only)

Available upon quote

4 AA alkaline batteries or 4 AA Ni-MH rechargeable batteries, dedicated AC adapter (optional)

Approximately 500 hours *At room temperature, using alkaline batteries, recording interval 1 minute, backlight OFF, measured value display OFF

Approx. 420g (including battery)

200Ω or less *Due to the wire resistance depending on the diameter of the thermocouple wire, measurement errors may occur depending on the length of the thermocouple.

1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, 90 minutes

-202.0~1,372℃

Approximately 1 second

± (0.01%rdg+0.1) ℃/℃ (other than 18~28℃)

ABS resin

K thermocouple thermocouple connector ANSI standard (yellow)

± (0.3%rdg+1) ℃ at 23℃±5℃ *Measurement accuracy varies depending on the connected sensor. *When connecting a surface sensor, the above accuracy will be +2%rdg.

Approximately (W) 158× (H) 106× (D) 40mm

0.1℃: -202.0~999.9℃, 1℃: Other than above

4 channels

AA alkaline batteries: 4, SD card (8GB): 1, instruction manual: 1, carrying case: 1

4974425800506

Customers who viewed this product also viewed

Reviews shown here are reviews of companies.

See More Data Loggers Products

Other products of Sato Keiryoki Mfg. Co., Ltd

Reviews shown here are reviews of companies.


View more products of Sato Keiryoki Mfg. Co., Ltd

About Company Handling This Product

Response Rate

100.0%


Response Time

14.2hrs

Company Overview

Sato Keiryoki Mfg. Co., Ltd., established in 1951 and headquartered in Tokyo, Japan, is a manufacturer of temp...

See More

  • Japan

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree