Hot air tool Controller for duct heater with fan-FDC2030
Hot air tool Controller for duct heater with fan-Hakko Electric Co., Ltd.

Hot air tool Controller for duct heater with fan
Hakko Electric Co., Ltd.


About This Product

■Summary A dedicated controller for the HFD series of duct heaters with fans. ■Features ・Easily control duct heaters with fans without the need for wiring work - By using this controller, you can easily control a duct heater with fan without the need for complicated circuit configuration or wiring work. -Temperature control is performed by a liquid expansion thermostat attached to a duct heater with fan. (ON/OFF control) - A safety circuit is installed to prevent the heater from operating when the fan is stopped. -Equipped with a fan delay operation function for excellent safety. - Two types are available: a stationary type and a wall-mounted type. ■Applications Air heating heater/drying heater ■Precautions for use ・Using the product at a voltage other than the rated voltage may cause accidents such as fire. ・Do not touch with wet hands. Doing so may cause electric shock. - Never use in an explosive or flammable atmosphere. Doing so may cause an explosion or fire. ・Do not use in the following places. Corrosive gas atmosphere, high or low temperatures outside the operating environment range, or locations exposed to steam or water droplets. caveat ■Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction. ■Do not use in an atmosphere of flammable or ignitable gas. Doing so may cause an explosion or fire. ■Do not touch with wet hands Doing so may cause electric shock. ■Tighten input/output wire connections securely. Securely tighten the input/output wire connections using crimp terminals. It may cause fire or electric shock. ■Do not put foreign objects inside Doing so may cause fire, electric shock, or malfunction. ■Turn off the main power supply before wiring. Before wiring input/output, turn off the main power supply. Failure to do so may result in electric shock. Note ■Do not splash water on the controller. Do not splash water on the controller. Doing so may cause electric shock, leakage, or malfunction. ■Do not use at any other than the specified power supply voltage. Using a power supply voltage other than the specified one may cause fire, electric shock, or malfunction. ■Make sure to ground the earth. Be sure to ground the product before use. Failure to do so may cause electrical leakage or electric shock.

  • Product

    Hot air tool Controller for duct heater with fan

Share this product


30+ people viewing


Free
Since our quotes are free, feel free to use our service.

No Phone Number Required
You won’t have to worry about receiving unnecessary calls.

1 Models of Hot air tool Controller for duct heater with fan

Product Image Part Number Price (excluding tax) Applicable model Connected fan current (50/60Hz) Connected fan nominal output Connection heater capacity Driving mode Fan delay timer Input voltage Mass Product code Protection function Temperature control method Temperature control range Type Usage environment Wiring entry hole for fan power Wiring entry hole for heater and safety circuit (number of circuits) Wiring lead-in hole For power supply line Wiring lead-in hole Recommended power supply line
Hot air tool Controller for duct heater with fan-Part Number-FDC2030

FDC2030

Available upon quote HFD2031 0.23/0.25A 25W 3kW Blow operation mode/Hot air operation mode (switchable by select switch) With start/stop switch 2~60 minutes (can be set using the timer inside the box) Three-phase 200V (50/60Hz) 9kg 0089011□ Over-temperature rise prevention: Over-temperature rise prevention input attached to duct heater with fan, external over-temperature rise prevention input 1 point each
Overcurrent protection: Molded circuit breaker, fan overload protection: Thermal relay
ON/OFF method using liquid expansion thermostat (includes duct heater with fan) Standard type: 30~80℃/Cold region type: -10~40℃ (Liquid expansion thermostat with duct heater with fan) Floor standing type Ambient temperature: 0~40℃, relative humidity: R.H. 80% or less (no condensation) Φ22 Φ34 (1 circuit) Φ22 VCT2mm2 4 cores

Customers who viewed this product also viewed

Other products of Hakko Electric Co., Ltd.


View more products of Hakko Electric Co., Ltd.

About Company Handling This Product

This is the version of our website addressed to speakers of English in the United States. If you are a resident of another country, please select the appropriate version of Metoree for your country in the drop-down menu.

Copyright © 2024 Metoree