Hot air tool Duct heater with fan Cold region type
Hakko Electric Co., Ltd.
About This Product
■Features
Drying heater unit with fan (pressure ventilation fan)
■Applications
Air heating heater/drying heater
■Type
Three phase 200V
caveat
■Wire each circuit individually
Wire the heater separately for each circuit. Failure to do so may result in fire, electric shock, or burns.
■Be sure to run the fan when energizing the heater.
Doing so may cause a fire or malfunction.
■Connect power cables securely using crimp terminals.
Failure to do so may result in fire, electric shock, or malfunction.
■Never use in an explosive or flammable gas atmosphere.
Doing so may cause a fire or explosion. Never use it.
■Do not use outdoors
This machine is for indoor use only. Do not install it outdoors (where it will be exposed to direct rain). Doing so may cause electrical leakage, fire, or malfunction.
■Do not use for circulating heating.
This product cannot be used for circulating heating. If used for circulating heating, it may cause electrical leakage, fire, or malfunction.
■Do not splash water on the main unit.
If water gets on the main unit, it may cause a short circuit, electric shock, or malfunction.
■Do not disassemble or modify the product.
Doing so may cause fire, electric shock, or burns.
■Do not use with a power source other than the rated voltage.
Doing so may cause fire, electric shock, or malfunction.
■Do not place spray cans etc. near the main unit.
Heat increases the pressure in the spray can, which can cause an explosion or fire.
■Do not use near flammable objects such as curtains.
Doing so may cause a fire.
■Do not insert metal such as wire or foreign objects into holes or gaps in the guard or main body.
Doing so may cause electric shock, malfunction, or burns.
■Do not use with the guard net removed.
Doing so may cause fire, electric shock, or burns.
■Do not dry gloves or laundry in the guard net.
Doing so may cause a fire.
Note
■Make sure to attach the ground
Failure to ground may cause electrical leakage or electric shock.
■Do not touch the main unit with bare hands during or immediately after use.
Doing so may cause burns.
■Do not place flammable materials within 2m while in use.
If flammable materials get inside the duct, it may cause a fire or malfunction.
■Do not use in the following locations, as it may cause fire or malfunction.
・In a corrosive gas atmosphere
・A place where there is no one
■Do not place anything on top of the main unit.
Doing so may cause fire, malfunction, or electric shock.
-
Product
Hot air tool Duct heater with fan Cold region type
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool Duct heater with fan Cold region type
| Product Image | Part Number | Price (excluding tax) | Control circuit allowable current | Discharge air temperature rise (50/60Hz) | Duct | Fan specifications Current (50/60Hz) | Fan specifications Maximum airflow (50/60Hz) | Fan specifications Maximum static pressure (50/60Hz) | Fan specifications Noise (50/60Hz) | Fan specifications Nominal output | Heater | Heater capacity | Heater circuit | Intake air temperature | Mass | Power supply | Preventing excessive temperature rise | Product code | Temperature control range | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HFD3075 |
Available upon quote | AC250V 3A (resistive load) | 19/17℃ | Iron (painted) | 0.23/0.25A | 1,140/1,320m3/h | 75/85Pa | 32/35dB | 25W | Stainless fin heater | 7.5kW | 7.5kW×1 | -20~35℃ | 20kg | Three-phase 200V (50/60Hz) | Manual reset type bimetallic thermostat 60℃ | 882035 | Liquid expansion thermostat -10~40℃ | Ambient temperature: -20~35℃, relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan