Hot Air Tool Hot Air Beam® Type D
Hakko Electric Co., Ltd.
About This Product
■Features
Uses replaceable cartridge heaters
■Applications
Air heating heater/resin processing heater
■Type
100V/single phase 200V
caveat
■Do not use when there is a risk of flammable material coming into contact with the pipe body.
It may cause fire or electric shock.
■Do not touch with bare hands
Do not touch the heater tube while the power is on or immediately after the power is turned off. There is a risk of burns.
■Do not disassemble or modify
Doing so may cause fire, electric shock, or malfunction.
■Connect power cables securely using crimp terminals.
Failure to do so may cause malfunction.
■Do not direct heated air at people
There is a risk of burns.
Note
■Do not use any gas other than air.
This may cause a malfunction.
■Do not use in the following cases, as it may cause fire or electric shock.
- When there is a risk of flammable material coming into contact with the hot air beam tube
- If foreign matter is attached to the surface of the hot air beam tube
・If the terminal part of the hot air beam gets wet with water
・In case of high humidity atmosphere
■Do not use above the continuous operating temperature.
This may cause a malfunction.
■Turn off the power before moving the device.
Moving the product without turning off the power may cause electric shock or burns.
■Be sure to control the temperature before use.
Failure to do so may cause malfunction.
■Make sure to flow air when energizing the hot air beam
Failure to do so may cause malfunction.
How to use
■Connection method
・Make sure that the temperature control device is turned off before connecting the hot air beam's power wire to the temperature control device's heater output terminal, etc.
- Connect the compensation lead wire of the temperature sensor that comes with the hot air beam to the sensor input terminal of the temperature control device. (The temperature sensor included with this product is a JIS K type thermocouple. Please make sure that the control equipment is compatible with this type of thermocouple.)
・Connect the air hose from the compressor or high-pressure blower to the air supply port. (Please prepare air hoses, metal fittings, etc. separately)
■Driving method
・Be sure to supply air before turning on the hot air beam.
・Turn on the temperature control device and set the temperature. The maximum operating temperature of this hot air beam is 600℃.
-
Product
Hot Air Tool Hot Air Beam® Type D
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot Air Tool Hot Air Beam® Type D
| Product Image | Part Number | Price (excluding tax) | Capacity | Continuous use air temperature | Maximum air temperature | Power wire | Product code | Sensor | Voltage |
|---|---|---|---|---|---|---|---|---|---|
|
|
HAB4011 |
Available upon quote | 100W | 500℃ | 600℃ | 300mm | 8883015 |
K type thermocouple (with M4Y terminal) Sheath material: SUS316 equivalent |
100V |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan