Hot air tool room dryer
Hakko Electric Co., Ltd.
About This Product
■Features
・A device that generates warm air at a relatively low temperature of 30 to 70℃. Ideal for drying after pasting wallpaper, curing after concrete construction, etc., where high-temperature hot air is not required, but you still want to use hot air to warm the room.
- Compact and convenient to carry. It also comes with casters with adjustable stoppers, so you can move it freely. We also have a 100V type that can be used with a regular household power source.
■Applications
Air heating heater/drying heater
■Type
100V/three phase 200V
■Application
・Drying after pasting wallpaper
・Curing after concrete construction
・Water droplet removal and drying after cleaning
■Precautions for use
- Since this product is for indoor use, please do not use it outdoors where it will be exposed to wind and rain, or where it may be exposed to condensation or water.
- Keep the intake air temperature to 40℃. Circulating heating is not possible.
・This product is only for heating air, so please do not use it to heat explosive, flammable, or ignitable gases.
・Please use the switch on the top to stop the operation. After the stop operation, the fan will run for 2 minutes to cool down and then stop, so please do not turn off the breaker or pull out the power cable while the machine is in operation.
・Do not put your fingers or objects into the inlet or outlet.
danger
■Do not heat explosive or flammable gases, or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■Never disassemble or modify the product.
Doing so may cause fire, electric shock, or malfunction.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation.
vinegar. Never touch it with bare hands.
Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not splash water on the main unit or control panel.
This may cause a short circuit, electric shock, or malfunction.
■Do not operate the control panel with wet hands.
Operating with wet hands may cause electric shock.
-
Product
Hot air tool room dryer
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool room dryer
| Product Image | Part Number | Price (excluding tax) | Air volume (50/60Hz) Reference value | Air volume adjustment method | Blower specifications Blower capacity | Blower specifications Maximum air volume (50/60Hz) | Blower specifications Maximum static pressure (50/60Hz) | Blower specifications Noise at maximum air volume (50/60Hz) | Discharge air temperature (at ambient temperature 20℃) | Discharge port diameter | Heater capacity | Intake air temperature | Mass | Power supply | Power wire | Product code | Suction caliber | Temperature control method | Thermostat temperature setting range |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAD1012 |
Available upon quote |
3.9/4.6m3/min (when the air volume adjustment plate is fully opened) 1.2/1.5m3/min (when air volume adjustment plate is fully closed) |
Adjustment of suction volume using air volume adjustment plate | 100V 0.15kW | 5.4/6.2m3/min | 0.63/0.91kPa | 70/74dB |
30~40℃ (when the air volume adjustment plate is fully opened) 60~80℃ (when air volume adjustment plate is fully closed) |
Φ73 (stainless steel pipe) | 1.2kW | -10℃~40℃ | 24kg | 100V 50/60Hz | Cabtire cord (VCTF) with plug 3m | 701010 | Φ76 (SPCC pipe) | 2-position ON/OFF control with liquid expansion thermostat | 30~80℃ |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan