Hot Air Tool Hot Air Generator 6000 Series
Hakko Electric Co., Ltd.
About This Product
■Features
-Equipped with a highly functional and safe controller.
-Uses a stainless steel sheathed heater, making it clean and durable.
・Excellent safety.
・Sturdy.
- Compatible with hot air circulation with an intake gas temperature of 340℃.
・Temperature control up to 450℃*1 is possible at the hot air generator outlet.
-The electrical box and controller can be separated, allowing operation from a remote location. (A separate optional cable is required.)
*1: Gas temperature varies depending on usage conditions. Please use under conditions where the temperature is below the maximum temperature.
■Applications
Air heating heater/drying heater
■Type
10kW/20kW
■Application
・Temperature rise, heating, and drying in the drying oven
・Removal of water after washing・drying
・Preheating and drying painted parts
・Heat source for various furnaces
danger
■Do not heat explosive or flammable gases, or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If the powder flows back from the discharge port, it may cause a fire or explosion.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not splash water on the main unit or controller, or use it in a place where water may splash.
This may cause a short circuit, electric shock, or malfunction.
■Do not operate the power breaker or controller with wet hands.
Operating with wet hands may cause electric shock.
■Do not use in environments with a lot of dust, lint, etc.
Lint, etc. will be heated inside the hot air generator and will fly out from the outlet in the form of flames, causing a fire.
■Never disassemble or modify the product.
Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction.
-
Product
Hot Air Tool Hot Air Generator 6000 Series
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot Air Tool Hot Air Generator 6000 Series
| Product Image | Part Number | Price (excluding tax) | Air volume adjustment method | Air volume adjustment range (30~60Hz) | Blower specifications Blower capacity | Blower specifications Maximum air volume (60Hz) | Blower specifications Maximum static pressure (60Hz) | Blower specifications Noise at maximum air volume (60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Inverter output frequency setting range | Mass | Power supply | Power wire | Product code | Suction caliber | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAP6101 |
Available upon quote | Adjust the intake air volume by varying the blower rotation speed using an inverter. | 4.3~8.3m3/min | Three phase 200V 0.3kW | 10.3m3/min | 1.36kPa | 78dB | Φ98 stainless steel pipe | Room temperature~450℃ | 10kW | -10~340℃ | 30~60Hz | 145kg | Three-phase 200V (50/60Hz) | 2PNCT 4 cores x 5.5mm2 x 3m | 13299 | Φ100 hole | 10.3kW |
Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan