Hot Air Tool Hot Air Generator 3000 Series
Hakko Electric Co., Ltd.
About This Product
■Features
-Equipped with a highly functional and safe controller.
-Uses a vortex blower with high wind pressure, making it effective for applications with large pressure loss.
・High wind pressure facilitates draining and drying with air blowing.
-Uses a stainless steel sheathed heater, making it clean and durable.
・Excellent safety.
・Since the main body and controller can be separated, it can be easily incorporated into various devices.
■Applications
Air heating heater/drying heater
■Type
5kW/10kW
■Application
・Temperature rise, heating, and drying in the drying oven
・Removal of water after washing・drying
・Bubbling heating of water and other liquids
danger
■Do not heat explosive or flammable gases or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■Never disassemble or modify the product.
Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the discharge port
Do not seal the discharge port during operation. Doing so may cause a fire or malfunction.
■Do not splash water on the main unit or controller.
This may cause a short circuit, electric shock, or malfunction.
■Do not touch the heater terminals.
Do not touch the heater terminals or power supply part during operation. Doing so may cause electric shock or burns.
■Do not place flammable items near the outlet.
Doing so may cause a fire.
■Do not put your hands or objects into the inlet or outlet.
Doing so may cause burns, injury, or malfunction.
■Do not operate the controller with wet hands.
Operating with wet hands may cause electric shock.
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If the powder flows back from the discharge port, it may cause a fire or explosion.
-
Product
Hot Air Tool Hot Air Generator 3000 Series
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot Air Tool Hot Air Generator 3000 Series
| Product Image | Part Number | Price (excluding tax) | Air volume adjustment method | Air volume adjustment range | Blower specifications Blower capacity | Blower specifications Blower type | Blower specifications Maximum air volume (50/60Hz) | Blower specifications Maximum static pressure (50/60Hz) | Blower specifications Noise at maximum air volume (50/60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Inverter output frequency setting range | Mass | Power supply | Power wire | Product code | Temperature control method | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAP3051 |
Available upon quote | Adjust the intake air volume by varying the blower rotation speed using an inverter. | 1.7~3.3m3/min | 1.9kW | Vortex blower | 4.0m3/min | 19.6kPa | 69.5dB | Φ73mm stainless steel pipe | Room temperature +α~300℃ | 5kW | -5℃~40℃ | 30Hz~60Hz | 85kg | Three-phase 200V (50/60Hz) | 2PNCT 4 cores x 3.5mm2 x 3m | 13297 | PID control (SSR drive) | 6.9kW |
Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan