Hot air tool 100V hot air generator
Hakko Electric Co., Ltd.
About This Product
■Features
・Supports hot air circulation
・The controller has been updated.
-Uses a stainless steel sheathed heater, making it clean and durable.
・Excellent safety.
・Supports circulation use with intake air temperature of 230℃. Temperature control is possible up to 300℃.
・Since the main body and controller can be separated, it can be easily incorporated into various devices.
■Applications
Air heating heater/drying heater
■Application
・Temperature rise, heating, and drying in the drying oven
・Removal of water droplets after cleaning
・Drying and curing after bonding electronic parts
・Drying of water-based paint
・Preheating and drying painted parts
・Heating and sterilization of food equipment
danger
■Do not heat explosive or flammable gases or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If powder flows back from the discharge port, it may cause a fire or explosion.
■Never disassemble or modify the product.
Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not splash water on the main unit or controller, or use it in a place where water may splash.
This may cause a short circuit, electric shock, or malfunction.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not use in environments with a lot of dust, lint, etc.
Lint and other lint are heated inside the hot air generator and eject from the outlet in the form of flames, which can cause a fire.
■Do not operate the power breaker or controller or connect or disconnect the power plug with wet hands.
Operating with wet hands may cause electric shock.
■Do not touch the heater terminals.
Do not touch the heater terminals or power supply part during operation. Doing so may cause electric shock or burns.
■Do not put your hands or objects into the inlet or outlet.
Doing so may cause burns, injury, or malfunction.
-
Product
Hot air tool 100V hot air generator
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool 100V hot air generator
| Product Image | Part Number | Price (excluding tax) | Air volume (50/60Hz) Reference value | Air volume adjustment method | Blower specifications Blower capacity | Blower specifications Maximum air volume (50/60Hz) | Blower specifications Maximum static pressure (50/60Hz) | Blower specifications Noise at maximum air volume (50/60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Mass | Power supply | Power wire | Product code | Suction caliber | Temperature control method | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAP1113 |
Available upon quote |
4.0/4.7m3/min (damper fully open) 2.8/3.3m3/min (damper 1/2 open) 0.4/0.5m3/min (damper fully closed) |
Adjust the suction amount with a movable damper | 0.15kW | 5.2/6.2m3/min | 0.63/0.89kPa | 70/74dB | Φ73mm stainless steel pipe | Room temperature~300℃ | 1.2kW | -10℃~230℃ | 25kg | 100V (50/60Hz) |
Cabtire cable 2PNCT 3 cores x 1.25mm2 x 3m With grounding 2P plug |
70005 | Φ75mm (movable damper included) | PID control (SSR drive) | 1.4kW |
Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan