Hot air tool Hot air generator HAS2000 series
Hakko Electric Co., Ltd.
About This Product
■Summary
Since there is no controller or electrical parts, it is ideal for incorporating into equipment. The shape is the same as the HAP series, so it can be used alone. It is also perfect if you want to control a hot air generator using an existing control panel. SSR, electromagnetic contactor, etc. can also be installed.
■Features
A controller-less type that is ideal for incorporating into equipment. Standard stock up to 40kW.
■Applications
Air heating heater/drying heater
■Type
3kW～80kW
danger
■Do not heat explosive or flammable gases or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■Never disassemble or modify the product.
Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not use in places where water may splash.
Splashing with water may cause short circuits, electric shocks, or malfunctions.
■Do not put your hands or objects into the inlet or outlet.
Doing so may cause burns, injury, or malfunction.
■Do not use in environments with a lot of dust, lint, etc.
Lint and other lint are heated inside the hot air generator and eject from the outlet in the form of flames, which can cause a fire.
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If the powder flows back from the discharge port, it may cause a fire or explosion.
■Do not touch the heater terminals.
Do not touch the heater terminals or power supply part during operation. Doing so may cause electric shock or burns.
■Do not use in places where water may splash.
Do not splash water on the main unit or use it in a place where water may splash. Splashing water onto the main unit may cause malfunction.
Note
■Do not place flammable items near the outlet.
Doing so may cause a fire.
■Do not place flammable items near the intake port.
If it is inhaled, it may cause a fire or malfunction.
-
Product
Hot air tool Hot air generator HAS2000 series
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool Hot air generator HAS2000 series
| Product Image | Part Number | Price (excluding tax) | Air volume (50/60Hz) Reference value | Air volume adjustment method | Blower specifications Blower capacity | Blower specifications Maximum air volume (60Hz) | Blower specifications Maximum static pressure (60Hz) | Blower specifications Noise at maximum air volume (60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Mass | Power supply | Product code | Suction caliber | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAS2032 |
Available upon quote |
4.0/4.8m3/min (damper fully open) 3.2/3.8m3/min (damper 2/3 open) 2.0/2.4m3/min (damper 1/3 open) |
Adjust the suction amount with a movable damper | Three phase 200V 0.15kW | 5.4/6.2m3/min | 0.63/0.91kPa | 70/74dB | Φ73mm stainless steel pipe | Room temperature~350℃ | 3kW | -10℃~230℃ | 26kg | Three-phase 200V (50/60Hz) | 13259 | Φ75mm (movable plate damper included) | 3.2kW | Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan