Hot air tool Hot air generator HAP2000T series
Hakko Electric Co., Ltd.
About This Product
■Summary
This is a hot air generator with high wind pressure and high air volume. Comes with a controller and inverter, so you can easily adjust the temperature and air volume. The controller part can also be separated.
■Features
A hot air generator with high wind pressure and high air volume equipped with a turbo fan.
■Applications
Air heating heater/drying heater
■Type
HAP2053T/HAP2103T
danger
■Do not heat explosive or flammable gases, or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If the powder flows back from the discharge port, it may cause a fire or explosion.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not splash water on the main unit or controller, or use it in a place where water may splash.
This may cause a short circuit, electric shock, or malfunction.
■Do not operate the power breaker or controller with wet hands.
Operating with wet hands may cause electric shock.
■Do not use in environments with a lot of dust, lint, etc.
Lint, etc. will be heated inside the hot air generator and will fly out from the outlet in the form of flames, causing a fire.
■Never disassemble or modify the product.
Never disassemble or modify the product. Doing so may cause fire, electric shock, or malfunction.
■Do not touch the heater terminals.
Do not touch the heater terminals or power supply part during operation. Doing so may cause electric shock or burns.
■Do not put your hands or objects into the inlet or outlet.
Doing so may cause burns, injury, or malfunction.
Note
■Keep within the temperature setting range
Please use within the discharge port gas temperature range of each model. Setting the temperature higher than this may cause fire or malfunction.
-
Product
Hot air tool Hot air generator HAP2000T series
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool Hot air generator HAP2000T series
| Product Image | Part Number | Price (excluding tax) | Air volume adjustment method | Air volume adjustment range (30~60Hz) | Blower specifications Blower capacity | Blower specifications Maximum air volume (60Hz) | Blower specifications Maximum static pressure (60Hz) | Blower specifications Noise at maximum air volume (60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Inverter output frequency setting range | Mass | Power supply | Power wire | Product code | Suction caliber | Temperature control method | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAP2053T |
Available upon quote | Adjust the intake air volume by varying the blower rotation speed using an inverter. | 3.2~6.5m3/min | Three phase 200V 0.4kW | 9.4m3/min | 3.0kPa | 81dB | Φ73mm stainless steel pipe | Room temperature~300℃ | 5kW | -10℃~150℃ | 30Hz~60Hz | 43kg | Three-phase 200V (50/60Hz) | 2PNCT 4 cores x 3.5mm2 x 3m | 13295 | Φ120mm hole | PID control (SSR drive) | 5.4kW | Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan