Hot air tool Hot air generator HAP2000 series
Hakko Electric Co., Ltd.
About This Product
■Features
・The definitive hot air generator using a sheathed heater. Standard stock up to 40kW.
-Equipped with a highly functional and safe controller. (Excluding HAS series)
-Uses a stainless steel sheathed heater, making it clean and durable.
- Light and compact.
・Excellent safety.
・Since the main body and controller can be separated, it can be easily incorporated into various devices.
・Sturdy.
■Applications
Air heating heater/drying heater
■Type
2000F series with inverter/2000 series without inverter. 3kW～80kW
■Precautions for use
・Using the product at a voltage other than the rated power supply voltage may cause accidents such as fire.
・Please do not modify the product.
- Never use in an explosive or flammable atmosphere.
- Please be especially careful as pieces of cloth, paper, etc. can easily be attracted to the inlet.
■Application
・Temperature rise, heating, drying, baking in the drying oven
・Water droplet removal and drying after cleaning
・Drying and curing after bonding electronic parts
・Preheating and drying painted parts
・Heating, sterilization, and thawing of food equipment
danger
■Do not heat explosive or flammable gases, or use in an atmosphere of these gases.
This device is not explosion-proof. Never heat explosive or flammable gases, or use the product in an atmosphere of these gases. Doing so may cause a fire or explosion.
caveat
■When sending hot air into the powder transfer line, be sure to install a check valve at the discharge port.
If the powder flows back from the discharge port, it may cause a fire or explosion.
■Do not touch hot parts with bare hands.
The area around the discharge port becomes hot during operation. Never touch it with bare hands. Doing so may cause burns.
■Do not remove the cover while driving
Do not drive or operate the product with the side cover removed. Doing so may cause fire, electric shock, or burns.
■Do not block the inlet and outlet ports.
Do not seal the inlet and outlet ports during operation. Doing so may cause a fire or malfunction.
■Do not splash water on the main unit or controller, or use it in a place where water may splash.
This may cause a short circuit, electric shock, or malfunction.
■Do not operate the power breaker or controller with wet hands.
Operating with wet hands may cause electric shock.
-
Product
Hot air tool Hot air generator HAP2000 series
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Hot air tool Hot air generator HAP2000 series
| Product Image | Part Number | Price (excluding tax) | Air volume adjustment method | Air volume adjustment range (30~60Hz) | Blower specifications Blower capacity | Blower specifications Maximum air volume (60Hz) | Blower specifications Maximum static pressure (60Hz) | Blower specifications Noise at maximum air volume (60Hz) | Discharge port diameter | Discharge port gas temperature range | Heater capacity | Inlet gas temperature | Inverter output frequency setting range | Mass | Power supply | Power wire | Product code | Suction caliber | Temperature control method | Total capacity | Usage environment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HAP2032F |
Available upon quote | Adjust the intake air volume by varying the blower rotation speed using an inverter. | 2.3m3/min~4.8m3/min | Three phase 200V 0.15kW | 6.2m3/min | 0.91kPa | 74dB | Φ73mm stainless steel pipe | Room temperature~350℃ | 3kW | -10℃~230℃ | 30Hz~60Hz | 30kg | Three-phase 200V (50/60Hz) | 2PNCT 4 cores x 2mm2 x 3m | 13250 | Φ75mm hole | PID control (SSR drive) | 3.2kW | Ambient temperature: 0~40℃ Relative humidity: R.H. 80% or less (no condensation) |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan