Soaking heating tool Hot Plate Slim
Hakko Electric Co., Ltd.
About This Product
■Features
・A heating plate that uses a sheet heating element made of silicone rubber.
- The plate material is aluminum, which has good heat conduction.
・It is light and easy to handle.
- Because it is thin, the entire device that incorporates the heating plate can save space.
■Applications
Heaters for solid heating/heaters for metal heating/semiconductor/FPD related equipment/heaters for resin processing
■Type
100V/single phase 200V
caveat
■Use with temperature control
Failure to do so may cause a fire.
■Do not splash water, oil, etc.
If water, oil, etc. adhere to the plate surface, it may cause fire, electric shock, or malfunction.
■Do not touch the plate surface with bare hands.
Do not touch the plate surface with bare hands while the power is on or immediately after the power is turned off. There is a risk of burns.
■Do not touch the heater terminals.
Do not touch the heater terminals while they are energized. There is a risk of electric shock.
■Do not use at any other than the specified power supply voltage.
Failure to do so may result in fire, electric shock, or malfunction.
■Do not use in a flammable gas atmosphere.
Doing so may cause an explosion or fire.
■Do not disassemble or modify
Doing so may cause fire, electric shock, or malfunction.
Note
■Use equipment to detect abnormal temperatures when unattended.
Failure to do so may result in fire or malfunction.
■Do not exceed the "maximum operating temperature"
Using the product above the maximum operating temperature may cause malfunction.
■Do not pull the lead wire
Pulling the heater lead wire may cause malfunction.
■Do not use when there is a risk of coming into contact with flammable materials.
Contact with flammable materials may cause fire or electric shock.
■How to use
・Connect the lead wire to the output terminal of the control device. If necessary, prepare a lead wire of 1.25 mm2 or more and use a relay terminal block to make an extension connection.
・Connect the compensation lead wire of the included thermocouple to the sensor input terminal of the control device. The included thermocouple is a K type thermocouple. Make sure the control device is for K type thermocouples.
・Activate the control equipment.
-
Product
Soaking heating tool Hot Plate Slim
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Soaking heating tool Hot Plate Slim
| Product Image | Part Number | Price (excluding tax) | Attached temperature sensor | Capacity | Heater wire | Mass | Maximum operating temperature | Plate dimensions | Plate material | Plate surface treatment | Product code | Surface roughness | Voltage | Withstand voltage |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
HPL1103 |
Available upon quote | Sheathed thermocouple K type φ2.3 (Model number: HTK0232) | 540W | Silicone rubber insulated glass braided wire (with M3.5 round crimp terminal) | Approximately 2.5kg | 200℃ | 320×320×9.5 | A5052 (aluminum material) | Anodized aluminum | 2013010 | 1.6a | 100V | AC600V 1 minute |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan