Nozzle heating tool Custom nozzle heater
Hakko Electric Co., Ltd.
About This Product
■Features
・Compatible with engineering plastics Nozzle temperature up to 400℃ possible
・Custom nozzle heater is a high-performance heater completed based on the technology of Saikan Baku heater.
- The heater element is integrated with the internal heater case, so it efficiently transmits the generated heat.
■Applications
Heater for solid heating/heater for metal heating/heater for resin processing
■Type
Inner diameter φ13~φ40
■Precautions for use
・Please use the sleeve and flexible tube at an ambient temperature of 180℃ or less.
- Be sure to control the temperature as overheating may cause premature disconnection.
caveat
■Use with the correct power supply voltage
Using the product at a power voltage other than the indicated voltage may cause fire or electric shock. Please be especially careful when using this product overseas.
■Protect the ambient temperature of the terminal area
Please keep the ambient temperature of the terminal part below the following temperature for each product. Failure to do so may result in fire, electric shock, or leakage. Custom nozzle heater, micro ring heater...180℃
■Do not modify this heater.
Doing so may cause fire, electric shock, or leakage.
■Do not use in high humidity atmosphere
Do not use in an atmosphere with humidity of 80% or higher. Doing so may cause electric shock or leakage.
■Do not use in a volatile gas atmosphere.
Do not use in volatile gas atmospheres or liquid gas heating. Doing so may cause an explosion or fire.
■Make sure to attach the ground
Be sure to attach a ground to the built-in device before using it. Failure to do so may cause electrical leakage or electric shock.
Note
■Do not use in the following cases, as it may cause fire or electric shock.
・When there is a risk of flammable material coming into contact with the heater
・If foreign matter is attached to the heater surface
・When the clearance between the heater and the heated object is large
・Places where the heater terminal is exposed to water
・When using in a high humidity environment such as a bath
■Turn off the power when replacing the heater.
If you want to replace the heater, turn off the power and allow it to reach room temperature. Do not place the heater on top of flammable materials immediately after removing it. Doing so may cause a fire.
■Do not hold the heating part with bare hands.
Do not hold the heat generating part of the heater with bare hands. Doing so may cause burns.
■Do not splash water on the terminal section.
If the terminal part gets wet with water and you continue to use it, it may cause electric shock or leakage.
-
Product
Nozzle heating tool Custom nozzle heater
-
Handling Company
Hakko Electric Co., Ltd.
-
Categories
1 Models of Nozzle heating tool Custom nozzle heater
| Product Image | Part Number | Price (excluding tax) | Capacity (W) | Continuous use temperature | Dimensions (mm) L | Product code | Voltage | Withstand voltage |
|---|---|---|---|---|---|---|---|---|
|
|
ZCN1306 |
Available upon quote | 250 | 400℃ | 60 | 8850220 | Single phase 200V | AC600V 1 minute |
Customers who viewed this product also viewed
Other products of Hakko Electric Co., Ltd.
View more products of Hakko Electric Co., Ltd.
About Company Handling This Product
- Japan